Page 1 of 1

[QLD] FS 85 MY Leone Coupe with blown EJ20t

Posted: Sun Apr 03, 2016 6:03 pm
by resin
Item............................... 1985 MY Coupe with EJ20t

Description...................... '85 coupe with blown RS EJ20t, 4eat auto. and flood damage.

Condition........................... Poor :(

Location ..........................Mt. Gravatt, Brisbane.

Price................................Offers

Contact ............................ PM me for details.

Hey everybody, long time no post.

I'm selling my old coupe, and I thought I'd post here first to see if I could end it to a good home.
The engine lost vacuum and conked out 2 years ago, and it sat for a while, and then a flash flood hit and it had water up to the door handles.
I've carted it around with me for long enough and now it has to go.

Parts include:

RS ej20t - buggered
port matched late model intake manifold, with adapters to an RS throttle body
silicone intake
VF30 turbo - I haven't pulled it off so I don't know condition.
large custom intercooler and 2.5" steel piping, hidden behind an early MY single headlight grille
3" dump pipe and exhaust.
4eat with ~20,000k's since rebuild, Taipan torque converter (~2800rpm, too low for the turbo) but was also filled with water.
twin trans coolers
modified MY radiator to suit
Adapted 2 piece L series tail shaft
4.4 rear LSD - again, water.
RX turbo rear discs, with new pads in a box.
13" coupe mags, some gutter damage.
1" lifted king springs in the front (IIRC)
Misc spares.

The body was resprayed in 2008, but some rust is coming back through again in under the windscreens, rear quarters, firewall and drivers side sill. The interior is shot, and I'd write off the loom as it was a bit of a rats nest to begin with.
It has no mod plates, but was registered and driven and has the old cross member from my brumby in it, and the chassis was cut and shut properly.

Will have to be towed from Mt. Gravatt area.

If you're keen, shoot me a PM on here and I'll send you some more pictures. I am open to reasonable offers. I don't want to have to strip it down and drag the carcass off to the wreckers, but if I don't get any bites in a week I'll post again with a list of parts :)

Thanks.

Image

Image

Posted: Mon Apr 04, 2016 7:57 pm
by vk3fjmh
do you have any of these parts



parts from 1986 -1990 subaru l series rx turbo or vortex turbo


vortex*

dash surround

digital cluster

spider intake manifold

rear spoiler

rear lsd r160

rear disc brakes*

rear sway bar

rear door spats



l series*

efi turbo 3 plug loom with knockbox


flapper air flow meter

3 plug dissy with vacume advance

front fender crome side lights

rear spoiler*

rear sway bar

rear lsd r160

rear spoiler

checkerd inside door panels

6 gauge instrument cluster with surround

and oil sender

digital cluster*

info on were to get gears
for changing gear ratios
on these gearboxes

mobile number is 0407 031 231


please let me know what you have
or know who has

regards james

Posted: Tue Apr 05, 2016 5:35 pm
by resin
No buddy, it is a MY Coupe with an RS ej20t etc. The only L series parts I have are listed above.

Posted: Tue Apr 05, 2016 6:44 pm
by vk3fjmh
ok thanks

Posted: Wed Apr 06, 2016 4:50 pm
by sublime
If only you were closer! Love the round headlights on the hardtop. :)

Posted: Wed Apr 06, 2016 6:43 pm
by Bantum
Looks ok, I wonder does it have a analouge dash ? Be good to see some interior shots ...

Add : On the track :
Might take a gander at it later ... :)

Cheers, Bantum ...

Posted: Sun Apr 10, 2016 8:25 pm
by 82leone
Any chance this is still for sale? Does your father live in gympie? If so it think I live next door. Cheers Shane

Posted: Mon Apr 11, 2016 5:46 am
by resin
Yeah its still for sale, and yeah, My parents are in Gympie. PM me some email addresses and or phone numbers and I can send some more pictures.

Cheers

PS. Sorry bantam, missed your post. Interior is buggered, like I said. The dash itself is cracked to shit, but it does have a decent dash matt over the top. I had a RS/legacy/who knows dash cluster jammed in there with some acrylic over the top for a while but now it just has the cluster hanging out. If you want pictures of it shoot me a PM with your details and I'll get them away

Posted: Tue Apr 12, 2016 9:57 am
by henpecked
Sorry , I'm not a buyer, only because I'm too far away.

But the 3eat in my 1984 wagon has just died and I'm looking for a replacement.

If you did this this conversion, can you tell me if the 4eat is an easy fit into the my body ? If so I'll look to do the same conversion.

I would also like to see a photo of the interior that includes the transmission selector if at all possible

I hope the sale goes well.

Cheers

Posted: Tue Apr 12, 2016 6:34 pm
by Green_eyed_liberty
pm sent

Posted: Wed Apr 13, 2016 5:55 am
by resin
PM's and emails sent :)

Posted: Thu Apr 28, 2016 5:50 pm
by resin
*bump* its still in my garage and I don't want it to be :)