Wanting ROll Bar for 1987 Subaru Brumby

BRAT87 · Post by **BRAT87** » Mon May 20, 2013 11:12 am

Hey,

currently own an 87 Subaru Brumby sports and I'm after a rear roll bar to mount a couple spot lights on it.

I live in Melbourne but would consider shipping if someone has something suitable in another state.

Cheers!

60766244 · Post by **60766244** » Mon May 20, 2013 11:22 am

BRAT87 wrote:Hey,

currently own an 87 Subaru Brumby sports and I'm after a rear roll bar to mount a couple spot lights on it.

I live in Melbourne but would consider shipping if someone has something suitable in another state.

Cheers!

I just pulled one off a ute. I can send a photo in a day or two...

BRAT87 · Post by **BRAT87** » Mon May 20, 2013 12:07 pm

That would be unreal mate! Really keen to get my hands on one! Called a guy last night who has one in coffs harbour and he isn't being very fourth coming in helping me get it shipped. hahaha

60766244 · Post by **60766244** » Mon May 20, 2013 7:27 pm

BRAT87 wrote:That would be unreal mate! Really keen to get my hands on one! Called a guy last night who has one in coffs harbour and he isn't being very fourth coming in helping me get it shipped. hahaha

It will need a bit of work to get it pretty. If you're handy with a 5" Angle Grinder then it will come up a treat! When I'm home, I'll take some shots!

60766244 · Post by **60766244** » Tue May 21, 2013 1:36 pm

Photo!

She needs some love and a good home.

BRAT87 · Post by **BRAT87** » Tue May 21, 2013 11:06 pm

Have sent you PM

BRAT87 · Post by **BRAT87** » Wed May 22, 2013 12:25 am

pm sent

BRAT87 · Post by **BRAT87** » Wed May 22, 2013 8:13 am

Pm sent

BRAT87 · Post by **BRAT87** » Mon Jun 03, 2013 4:29 pm

Still wanting a roll bar

Brumby Kid · Post by **Brumby Kid** » Tue Jun 04, 2013 9:49 am

Same, offer Brat87 first though, but if there are 2

BRAT87 · Post by **BRAT87** » Wed Jun 05, 2013 11:51 am

cheers mate! There have been a few on gumtree for sale. But you wouldn't believe how hard it is to get people to cooperate with shipping.

60766244 · Post by **60766244** » Wed Jun 05, 2013 7:59 pm

Ah I'd been away. Totally slipped my mind. Will call TNT tomorrow.

BRAT87 · Post by **BRAT87** » Thu Jun 06, 2013 11:16 am

Wasn't referring to you 60766244.

60766244 · Post by **60766244** » Fri Jun 07, 2013 3:37 am

Ah alright, well...

TNT quoted $150 minimum.

Not much of a goer there bud.

julian · Post by **julian** » Fri Jun 07, 2013 10:09 am

Brumby kid, have you tried subawreck near parafield airport?

BRAT87 · Post by **BRAT87** » Fri Jun 07, 2013 10:18 am

No. And there was another roll bar in Wollongong in NSW. I tried e-go couriers and they quoted $174. Freight is just so damn expensive!!!

60766244 wrote:Ah alright, well...

TNT quoted $150 minimum.

Not much of a goer there bud.

NachaLuva · Post by **NachaLuva** » Fri Jun 07, 2013 2:19 pm

BRAT87 wrote:I tried e-go couriers and they quoted $174. Freight is just so damn expensive!!!

If you can ship it depot to depot it costs bout half with e-go...just gotta get it dropped off at the depot their end & pick it up your end

A word of warning with e-go...they are cheap but dont always do the best job. I've shipped items with them 4 times. Been happy 3 times but they dropped my alloy bullbar & scratched up the top & bottom

I pointed it out to them but didnt make a claim as its gonna get scratched anyway....

YouTube · Post by **El_Freddo** » Sun Jun 09, 2013 1:00 am

Go to an exhaust shop and tell them what you want, they'll be able to knock up any bar work you want to your specs.

Dunno what it would cost but there won't be any excessive freight cost this way

And if you organise to do it in their low work periods it could work in your favour price wise.

Cheers

Bennie

BRAT87 · Post by **BRAT87** » Tue Jun 11, 2013 11:31 am

Cheers mate! Yeah a couple people have suggested I do that. Might go down to the local place on the weekend and see what they can offer.

El_Freddo wrote:Go to an exhaust shop and tell them what you want, they'll be able to knock up any bar work you want to your specs.

Dunno what it would cost but there won't be any excessive freight cost this way And if you organise to do it in their low work periods it could work in your favour price wise.

Cheers

Bennie

The ALL NEW AUSubaru.com.au Forums

Wanting ROll Bar for 1987 Subaru Brumby

Wanting ROll Bar for 1987 Subaru Brumby

Roll bar