brumby parts wanted

suba2 · Post by **suba2** » Thu Aug 08, 2013 8:38 pm

Hi all Im after the following parts for a 87 or 89 brumby I own both
1. Rollbar
2.full metal rear step towbar form what I've seen goes full length of the back inbetween the bumper bar ets
3.lift kit 2,3,or4 inch lift kit
let me know what you've got price pic's and where you're located thanks

suba2 · Post by **suba2** » Sun Aug 11, 2013 4:04 pm

Quick Question has anyone got a reply form Suby Wan Kenobi regarding the lift kits he's selling on here???

pzs · Post by **pzs** » Sun Aug 11, 2013 7:39 pm

I got a roll bar and step up steel rear bumper.....trouble is I'm in Alice Springs, where are you?

suba2 · Post by **suba2** » Sun Aug 11, 2013 7:58 pm

Thanks for replying don't think we could work anything out frieght would be throught the roof im in N.S.W if you where in W.A might be able to work somthing out a friend of mine has got contacts over there

cowby327 · Post by **cowby327** » Mon Aug 19, 2013 9:16 am

Hi I have a rollbar stainless 3inch location mackay queensland

chinski · Post by **chinski** » Mon Aug 19, 2013 6:15 pm

just removed a 2 inch lift from my 86 brumby today, strut spacers on the front & 3x 2 inch lift blocks each side rear, 2 under fwd control arm ( think thats what its called) & one under the torsion bar mounts each side, no idea what its worth, i can get a pic up if you want ?

suba2 · Post by **suba2** » Mon Aug 19, 2013 6:43 pm

a pic would be great
it would also be usefull if you have any pics so of it installed on youre brumby so i can see how it all goes together
and have you got all the longer bolts brakes to put it back together

chinski · Post by **chinski** » Tue Aug 20, 2013 7:41 pm

heres afew pics of the kit:

and afew of blocks fitted to rear end:

dont have any of strrut spacers fitted to front, had to remove tie rod ends, ball joints, CV from hub to drop strut low enough to remove lift spacers so would be the same job to install

suba2 · Post by **suba2** » Fri Aug 23, 2013 5:18 am

G'day Mate I defiantly want it how about $150.00 posted
Also where do the big long spacers come out from?

suba2 · Post by **suba2** » Fri Aug 23, 2013 1:09 pm

pzs wrote:I got a roll bar and step up steel rear bumper.....trouble is I'm in Alice Springs, where are you?

Can u send me a pic of the metal step I may be interested depending on how much u want for it and Frieght to either home N.S.W or Granville N.S.W work
Thanks Greg

suba2 · Post by **suba2** » Fri Aug 23, 2013 1:11 pm

Home Glenfield N.S.W 2167

chinski · Post by **chinski** » Mon Aug 26, 2013 6:36 pm

suba2 wrote:G'day Mate I defiantly want it how about $150.00 posted
Also where do the big long spacers come out from?

long ones are under the torsion bars, easy to fit man

replied to your PM too mate