WTB [WA] Front drive shafts to suit Gen 1 Liberty

niterida · Post by **niterida** » Wed Mar 26, 2014 8:12 pm

Chasing a couple of front drive shafts to suit my RS Liberty - don't need to be in perfect condition as long as they are still usable.

Will be in Perth early next week to pick up if any one has any.

Cheers
Ken

PM or 0439 949 633

Post by **TOONGA** » Wed Mar 26, 2014 11:20 pm

PM sent

TOONGA

RSR 555 · Post by **RSR 555** » Thu Apr 24, 2014 10:23 am

Did you get this sorted Ken?

niterida · Post by **niterida** » Thu Apr 24, 2014 2:27 pm

Sort of - Jules has a pair of outers but I haven't managed to get them from him yet.

RSR 555 · Post by **RSR 555** » Thu Apr 24, 2014 6:28 pm

Are they RS or just Liberty? 2 different splines

Post by **TOONGA** » Thu Apr 24, 2014 7:54 pm

When are you down this way next Ken?

I have been doing a fair amount of overtime and the post office like most other things here in Bunbury is closed on Saturdays.

TOONGA

niterida · Post by **niterida** » Thu Apr 24, 2014 8:43 pm

RSR 555 wrote:Are they RS or just Liberty? 2 different splines

Dunno - need them for the RS so hopefully they be the right ones - Jules ??

Post by **TOONGA** » Thu Apr 24, 2014 8:47 pm

No idea Ken all I know is that they are liberty outers

TOONGA

RSR 555 · Post by **RSR 555** » Thu Apr 24, 2014 9:00 pm

Need to count the splines on the shaft to know for sure. These are missing the boots, does this mean they were replaced because they made noise? I see the inners are off them, so I'm thinking the inners got used on a Brumby?

Post by **TOONGA** » Thu Apr 24, 2014 9:07 pm

Shafts are new as far as I know, they are stiff with very little play and the innards are not dented. I got them from Werty when I picked up the lift kit he sold me when he sold his L wagon.

The inner cups were not on the shafts when I got them.

TOONGA