I've got two dogs I need to keep in the rear of the wagon, I know there were L series bariers , anyone have any pictures of a MY barrier , or a home-made solution,
I know I can get the One-size-for-all dog gates, but would like a proper barrier as well if possible. With the rea seats leaning back into the cargo space, its not a simple flat design.
thanks
MY Tourn wagon: cargo barrier or just a design ?
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
Sketchy ...
I don't know of any - It would have to be a home made jobbie, either by repurposing an existing or fab up a new one + I'd use the seat belt bolt locations to secure it.
I can do a sketch for you if that's not clear ..
Cheers, bantum ...
I can do a sketch for you if that's not clear ..
Cheers, bantum ...
Have you tried any of the big names like Milford - even if they no longer manufacture them due to demand, they might be willing to provide their engineering drawing.
MY touring wagon would be a tough one, but even the standard MY wagon drawing could be used as a starting point...
MY touring wagon would be a tough one, but even the standard MY wagon drawing could be used as a starting point...
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.
Contact me for reproduction XT6 hubs...and EA82 rear discs.
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
More ...
Um - You could use this as a guide :
More info found here : downloads.php?do=file&id=142
Cheers, Bantum ...
More info found here : downloads.php?do=file&id=142
Cheers, Bantum ...