New: AUSubaru Tech. Manual up - ausubaru.wikidot.com
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
Update ...
I've just added a SPFI conversion page in a new section + revised a few pages, still heaps more to do though ...
P.S. - I've also updated the main menu on side with a new heading 'Advanced Workshop' & moved the modification sections under it ...
Cheers, Bantum ...
P.S. - I've also updated the main menu on side with a new heading 'Advanced Workshop' & moved the modification sections under it ...
Cheers, Bantum ...
- Silverbullet
- Senior Member
- Posts: 2870
- Joined: Mon Aug 23, 2010 6:20 pm
- Location: Adelaide
Any chance you could link my Hitachi rebuild thread? I see there's not much in the fuel and emissions section
showthread.php?t=23367&highlight=hitachi+rebuild
showthread.php?t=23367&highlight=hitachi+rebuild
Will it ever end!?
-EA81 TWIN CARB!!!!
-L series 5 speed
-Custom paint job
-2" lift
-Full custom re-wire
-L series front end
-EA81 TWIN CARB!!!!
-L series 5 speed
-Custom paint job
-2" lift
-Full custom re-wire
-L series front end
Was looking for wheel nut tightening torque & came across this:
"Outback / Forester / some Impreza models Wheels - 115mm PCD x 5 stud"
It should be 100mm PCD (at least with the SF Foz - I think 115mm came in later)
So anyway...what is the correct torque for an SF Foz wheel stud?
"Outback / Forester / some Impreza models Wheels - 115mm PCD x 5 stud"
It should be 100mm PCD (at least with the SF Foz - I think 115mm came in later)
So anyway...what is the correct torque for an SF Foz wheel stud?
[SIGPIC][/SIGPIC]
Owner SubieLiftOz, lift kits for Subarus
'97 Forester: EJ22E; 4" Custom Body Lift; JDM STi plated LSD; 20mm WRX RSB; Snorkel; Kings
Owner SubieLiftOz, lift kits for Subarus
'97 Forester: EJ22E; 4" Custom Body Lift; JDM STi plated LSD; 20mm WRX RSB; Snorkel; Kings
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
Added ...
Done ...Silverbullet wrote: ... Any chance you could link my Hitachi rebuild thread ... ?
Yeah , I've been meaning to find more, just haven't got round to it. Seems like I'm the only one doing anything atm ...Silverbullet wrote: ... I see there's not much in the fuel and emissions section ...
Cheers, Bantum ...
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
Correction ...
Noted + Corrected ...NachaLuva wrote: ... It should be 100mm PCD ( at least with the SF Foz - I think 115mm came in later ) ?
I've no idea, but when I do find out, will post it up ...NachaLuva wrote: ... So anyway ... what is the correct torque for an SF Foz wheel stud ... ?
Cheers, Bantum ...
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
Watcher ...
Sorry, must of missed this ...
First: Signup to wikidot.com - Use the same name as you use on this site so we can keep track.
Second: Go to ausubaru.wikidot.com
Third: Become a "Watcher" for the wiki - scroll down & look for a box in the lower right of screen labelled 'Watch: site' - Click on this to add your name.
Fourth: Once your name has been added & shows up on the "watchers" list, Please then PM 60766244 or post in this thread so we know who to "Invite" to the specific wiki.
Fifth: Once you've accepted your invitation to ausubaru.wikidot.com then you should be able to Edit / Add articles and improve the wiki as we go along !
Cheers, Bantum ...
P.S. - I might make this a bit clearer also on the wiki page itself ...
If you wish to contribute / become an editor :Subyroo wrote:I have signed up to Wikidot under Subyroo (of course ), do I also need an invite from you for the site?
First: Signup to wikidot.com - Use the same name as you use on this site so we can keep track.
Second: Go to ausubaru.wikidot.com
Third: Become a "Watcher" for the wiki - scroll down & look for a box in the lower right of screen labelled 'Watch: site' - Click on this to add your name.
Fourth: Once your name has been added & shows up on the "watchers" list, Please then PM 60766244 or post in this thread so we know who to "Invite" to the specific wiki.
Fifth: Once you've accepted your invitation to ausubaru.wikidot.com then you should be able to Edit / Add articles and improve the wiki as we go along !
Cheers, Bantum ...
P.S. - I might make this a bit clearer also on the wiki page itself ...
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
No more pages ...
Hmm ...
We seem to have hit a snag, as the Wiki site is not responding to our requests for a fix to 'add' more pages ...
Can anybody help ?
Ciao, Bantum ...
We seem to have hit a snag, as the Wiki site is not responding to our requests for a fix to 'add' more pages ...
Can anybody help ?
Ciao, Bantum ...
What do you mean?Bantum wrote:Hmm ...
We seem to have hit a snag, as the Wiki site is not responding to our requests for a fix to 'add' more pages ...
Can anybody help ?
Ciao, Bantum ...
I can set you up something on another server if thatsw hat you're after, if you have. Way to get the data out of the other site. Do they have an API? (I haven't looked sorry,ca n next week).
- 60766244
- Junior Member
- Posts: 586
- Joined: Fri Nov 09, 2012 3:32 pm
- Location: Kalamunda, Western Australia
Okay, so, made a page the usual way I made each and every other page.
http://ausubaru.wikidot.com/wiki:added- ... for-bantum
Not sure what the go is there buddy - she seems to be working great!
http://ausubaru.wikidot.com/wiki:added- ... for-bantum
Not sure what the go is there buddy - she seems to be working great!
Otter the 2004 Outback with all the fruit.
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?
|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?
|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||
- 60766244
- Junior Member
- Posts: 586
- Joined: Fri Nov 09, 2012 3:32 pm
- Location: Kalamunda, Western Australia
Go to the "Admin Toolbox" on the side menu there, and click "Edit this menu" on there, once there you'll see the code setup for the menu.
Follow the way it's setup there, being careful not to disturb existing pages. (Copy paste a page template, then change it's name how it should be for your specific topic for the page.
Save the changes, then go back to the home page to view your new menu item. Click on the new menu item - it will display a page asking if you'd like to make one to suit this item, since one doesn't currently "Exist" - click the link and play to your hearts content.
Also, edit the one I made to the page you've been wanting to build.
Hope I helped.
Follow the way it's setup there, being careful not to disturb existing pages. (Copy paste a page template, then change it's name how it should be for your specific topic for the page.
Save the changes, then go back to the home page to view your new menu item. Click on the new menu item - it will display a page asking if you'd like to make one to suit this item, since one doesn't currently "Exist" - click the link and play to your hearts content.
Also, edit the one I made to the page you've been wanting to build.
Hope I helped.
Otter the 2004 Outback with all the fruit.
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?
|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?
|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
Nope ...
Well that's what I had been doing ( just tried it again & still doesn't work for me now ) so might have to find another way to add the pages ... ... keeps coming up with this: http://ausubaru.wikidot.com/wiki:spare-parts60766244 wrote: ... Copy & paste a page template, then change it's name how it should be for your specific topic for the page - Save the changes, then go back to the home page to view your new menu item. Click on the new menu item - it will display a page asking if you'd like to make one to suit this item, since one doesn't currently "Exist" - click the link ...
P.S. - the box 'add new page' don't work either ...
I just had a thought : Is there a limit to number of pages ?
Cheers, Bantum ...
- 60766244
- Junior Member
- Posts: 586
- Joined: Fri Nov 09, 2012 3:32 pm
- Location: Kalamunda, Western Australia
Were you able to edit the page I'd made?Bantum wrote:Well that's what I had been doing ( just tried it again & still doesn't work for me now ) so might have to find another way to add the pages ... ... keeps coming up with this: http://ausubaru.wikidot.com/wiki:spare-parts
P.S. - the box 'add new page' don't work either ...
I just had a thought : Is there a limit to number of pages ?
Cheers, Bantum ...
I just un-made, then re-made you an admin on the page.
Has this fixed the issue?
Otter the 2004 Outback with all the fruit.
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?
|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?
|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
Re : Page Add ...
Yep - I can do all the normal editing, just can't add a page for some reason ...
Not to worry ( to much ) as I'll just ask you to fix it for us ...
On that note - Can you please check that the page 'Spare parts' is working correctly for you Jay Jay ? as well as my latest page 'Subaru Links' - the intent here is to add some 'official' Subaru web sites & interesting tid bits in the library ...
P.S. - I also did a quick check of the site & it says there is a max of 300 MB storage ...
Cheers, Bantum ...
Not to worry ( to much ) as I'll just ask you to fix it for us ...
On that note - Can you please check that the page 'Spare parts' is working correctly for you Jay Jay ? as well as my latest page 'Subaru Links' - the intent here is to add some 'official' Subaru web sites & interesting tid bits in the library ...
P.S. - I also did a quick check of the site & it says there is a max of 300 MB storage ...
Cheers, Bantum ...
- 60766244
- Junior Member
- Posts: 586
- Joined: Fri Nov 09, 2012 3:32 pm
- Location: Kalamunda, Western Australia
Hey Bantum,
How's the site been for you?
I've been off AUSubaru for a while now so I haven't kept up. PM me if you want and I'll pass full admin over to your account.
How's the site been for you?
I've been off AUSubaru for a while now so I haven't kept up. PM me if you want and I'll pass full admin over to your account.
Otter the 2004 Outback with all the fruit.
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?
|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?
|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
More Wiki ...
Sorry I missed this earlier ...
Sure I'd welcome any input from others out there, but not sure if anybody uses it so haven't bothered with it recently.
It might end up being a suppository of what's already on here.
Any thoughts on where to take this ?
Ciao, Bantum ...
Sure I'd welcome any input from others out there, but not sure if anybody uses it so haven't bothered with it recently.
It might end up being a suppository of what's already on here.
Any thoughts on where to take this ?
Ciao, Bantum ...