Page 1 of 3

New: AUSubaru Tech. Manual up - ausubaru.wikidot.com

Posted: Fri Nov 16, 2012 11:03 am
by 60766244
I took a while getting it going because I tried 3-5 other 'wiki' sites before I settled on one that was a) Free, b) Easy to use, c) Had minimal advertising and d) security - Hopefully it all works out...

I've recovered some information from the old Tech Manual ( http://www.ausubaru.com/wiki/index.php/Main_Page - dead ) and now placed it into a functioning manual on a new page ( http://www.ausubaru.wikidot.com )

It's still very rough a needs work to make clean and pretty but I will get that done in a couple of days.

I will eventually sort out moderator rights for people and 'memberships' for light editing yourselves, but in the mean time post in this thread for any changes you see as beneficial to the site or any pages I should add.

In about a week or so it should have photos up and be all clean and well formatted.

From there once housekeeping has been conquered then I will start adding information as requested.

Current pages planned to build in it:
  • A 'Subaru Costs' page - where all can enter info about servicing/parts etc.
  • A "Subaru Numbers" page where all part numbers could be listed including paint codes and various spec's
  • ...Too be extended....
Enjoy...
http://www.ausubaru.wikidot.com

Posted: Fri Nov 16, 2012 9:29 pm
by El_Freddo
Looks like it's off to a good start!

Keep up the good work!

Cheers

Bennie

Posted: Sat Nov 17, 2012 9:11 am
by Matt
Awesome work heaps of information in it :)

Posted: Sat Nov 17, 2012 9:46 am
by TOONGA
Well done and thanks for the mention, I really like the fact that you have to be a member of the wiki to edit the pages.

I have information in PDF form on carby upgrades and SPFI as well if you want them or the links for the information. As well as a plethora of links and pdf FSMs (we need a server)

I may even be tempted to do a spam free write up of the EJ carby conversion :)

TOONGA

Like it ...

Posted: Sat Nov 17, 2012 11:48 am
by Bantum
Good job so far ... :D

P.S. - There are several posts & how to's here on this site that could be extracted & added to the new wiki site, we just need to find them ... :-|

Maybe start with a few of these :
Although the last one is still incomplete, it would be handy to add ... ;)

See what else I can find ...

Posted: Sun Nov 18, 2012 12:40 am
by 60766244
All sounds good.

TOONGA - I'd like to see them... Are they worth copy/pasting or simply linking to the site?

BANTUM - Cheers, I will get to linking those up as soon as I can.

If anyone has issues with any posts of theirs being on the wiki, PM me and let me know and I can remove any mention to you (otherwise I will credit people by default) or either take down the information, and re-write as required.

Some work done tonight:
- Tidied up some pages with terrible grammar/formatting or left-over code and over CAPITALISATION
- Removed duplicates
- Emptied the Misc. page into several other pages including:
- More info into "Engine"
- "Subaru Costs"
- "Subaru Numbers"

More to be done tomorrow.

Cheers

Posted: Sun Nov 18, 2012 9:18 am
by TOONGA
subaru write ups ... cars and or mechanical upgrades / down grades? there are some electronics sites as well ... hope you have some time to spare as this is one folder of my subaru bookmarks:) plenty of other subaru related stuff

http://www.ultimatesubaru.org/forum/sho ... 000&page=3
showthread.php?t=14372
showthread.php?t=19809
showthread.php?t=16439
showthread.php?t=20093
showthread.php?t=15851
http://www.surrealmirage.com/subaru/trans.html
http://lovehorsepower.com/joomla/index. ... &Itemid=60
http://wordpress.suberdave.com/?page_id=175
http://jdmfsm.info/Auto/Japan/Subaru/
http://www.cars101.com/oldsubaru.html
http://www.transport.wa.gov.au/licensing/20404.asp
http://z15.invisionfree.com/Mv_Brat_Bru ... c=134&st=0
http://www.oldschool.co.nz/phpbb/viewto ... 17&t=23679
http://www.ultimatesubaru.org/forum/sho ... p?t=130943
http://subarujusty.proboards.com/index. ... hread=3896
http://japanesenostalgiccar.com/forum/v ... php?t=3002
http://forums.nasioc.com/forums/showthr ... ?t=1351744
http://japanesenostalgiccar.com/forum/v ... f=8&t=3002
http://www.sigma-galant.com/viewtopic.p ... 28&start=0
showthread.php?t=19639
http://subaruxt.com/forum/viewtopic.php ... &sk=t&sd=a
http://www.phizinza.com/index.html
http://allwheeldriveauto.com/subaru-che ... explained/
http://www.subaruoutback.org/forums/66- ... ioner.html
http://www.ultimatesubaru.org/forum/sho ... p?t=109923
http://www.mobiloil.com/USA-English/Mot ... .aspx?pg=1
http://www.rs25.com/forums/f145/t102180 ... ebody.html
http://shoptalkforums.com/viewtopic.php?f=19&t=125689
http://www.troublecodes.net/Subaru/
http://shop.adapterkings.com/4-Lug-to-5 ... -5-Lug.htm
http://www.triumphspitfire.com/jets.html
http://ep-ca.mersen.com/fuseology.html
http://www.glenn-ring.com/tech/relay_starter.htm
http://www.surrealmirage.com/subaru/trans.html#transtip
http://www.indysworld.com/80s/general/U ... erFix.html
http://www.leoneturbo.com/docs/EA81_SPI_guide.pdf
http://www.g2.nu/chris/mini/megajolt.php
http://www.diyautotune.com/catalog/micr ... 3793a15cab
http://autosportlabs.com/

the sigma one is there for the suck through turbo, just in case someone asks :)


TOONGA

Posted: Sun Nov 18, 2012 9:25 am
by 60766244
TOONGA!

I knew this was going to be an undertaking but whoa!

Should keep me busy for a while. ;)

Posted: Sun Nov 18, 2012 9:31 am
by TOONGA
60766244 wrote:TOONGA!

I knew this was going to be an undertaking but whoa!

Should keep me busy for a while. ;)
:) PM sent

TOONGA

Posted: Sun Nov 18, 2012 9:46 am
by thunder039
well done, great work will be helpful to others for sure

Posted: Sun Nov 18, 2012 1:49 pm
by 60766244
Bantum, TOONGA - All the links you've put up on this thread and the info contained within has been transferred to the wiki.

Cheers for the help! - It's starting to come together!

I eagerly await more in that PM, TOONGA.

Updates ...

Posted: Sun Nov 18, 2012 4:16 pm
by Bantum
60766244 wrote: ... Bantum - All the links you've put up on this thread and the info contained within has been transferred to the wiki ...
Thanks good work so far ... :D

A few things you might want to add :
- add a link / reference to the original source ...
- allow for Notes: at foot of page for updates, etc ...

Another area of improvement would be to better structure the main index; i.e.
under the navigation add suitable headings for each catergory ( Similar to our web site ) eg:

- General
- Workshop
- Tools
- Manuals
- Brochures
- Links

Then place relavent threads under them.

I hope that helps tidy up the site ... :)

Cheers, Bantum ...

Posted: Sun Nov 18, 2012 5:53 pm
by 60766244
Bantum wrote:Thanks good work so far ... :D

A few things you might want to add :
- add a link / reference to the original source ...
- allow for Notes: at foot of page for updates, etc ...

Another area of improvement would be to better structure the main index; i.e.
under the navigation add suitable headings for each catergory ( Similar to our web site ) eg:
- General
- Workshop
- Tools
- Manuals
Then place relavent threads under them.

I hope that helps tidy up the site ... :)

Cheers, Bantum ...
I've given some headings to the menu to help guide people as you suggested and I have set it up so it credits people at the bottom of each page they contributed too.

I will make links to relevant threads where possible when I get a moment.

I also set up a comments section accessible from the home page and at the top tab menu labeled "Discuss". I tried adding a HTML code comment box at the bottom of each page but whenever any of the code of the site gets edited it seems to wipe all comments. I'll research it, but for now we have at least one comment section that should be stable.

I've already had a couple of strange spam-like edits on the site. Working to ensure its security so it might take longer to work out how to make it user-editable whilst keeping the site safe.

Cheers,

Congrats and EE20 diesel

Posted: Sun Nov 18, 2012 8:49 pm
by pitrack_1
Brilliant work, people! I'm sure it will be much appreciated by many. I can only hope one day to know as much and contribute as usefully as you. :cool:

One minor edit, perhaps on the engines page the EE20 could be labelled a diesel... nothing a the moment to indicate it is different to the petrols. Also, the different sizes... I'm intrigued, having not heard of any? Certainly there are different revisions: nominally the same outputs but substantial configuration and internal changes (like turbos, conrods, pistons, electronics, injectors, EURO4/5/6(?) emission controls, etc).

Thanks,

Posted: Mon Nov 19, 2012 9:53 am
by 60766244
pitrack_1 wrote:Brilliant work, people! I'm sure it will be much appreciated by many. I can only hope one day to know as much and contribute as usefully as you. :cool:

One minor edit, perhaps on the engines page the EE20 could be labelled a diesel... nothing a the moment to indicate it is different to the petrols. Also, the different sizes... I'm intrigued, having not heard of any? Certainly there are different revisions: nominally the same outputs but substantial configuration and internal changes (like turbos, conrods, pistons, electronics, injectors, EURO4/5/6(?) emission controls, etc).

Thanks,
All the info has been provided by Bantum in regards to the motors. For me it's been mainly editing and copy-pasting. I will track down your EE20 and mention its diesel status. For the rest I guess research will need to come into it. Right now it's all just skin and ligaments. Muscle and flesh needs to be found. ;)

Cheers,

Wiki Fixer ...

Posted: Mon Nov 19, 2012 2:04 pm
by Bantum
pitrack_1 wrote: One minor edit, perhaps on the engines page the EE20 could be labelled a diesel... nothing a the moment to indicate it is different to the petrols. Also, the different sizes... I'm intrigued, having not heard of any? Certainly there are different revisions: nominally the same outputs but substantial configuration and internal changes (like turbos, conrods, pistons, electronics, injectors, EURO4/5/6(?) emission controls, etc) ...
Yeah sorry guy's, I haven't got round to checking all the facts, just did a quick cut & paste job ... :)
60766244 wrote: ... All the info has been provided by Bantum in regards to the motors. For me it's been mainly editing and copy-pasting. I will track down your EE20 and mention its diesel status. For the rest I guess research will need to come into it. Right now it's all just skin and ligaments. Muscle and flesh needs to be found ...
I might have to go over the list again, as there are a few error's & omissions + heaps more detials to add. Can you please advise what is the best way to make corrections + add info to the wiki site now that is up & running ?

P.S. - Have you sorted out editing privilages yet ? as there is also stuff on wiki that dosn't need to be there ... :shock:

P.P.S. + If I do make changes to the source - I'll notify you.

Cheers, Bantum.

Sorted... I think.

Posted: Mon Nov 19, 2012 8:59 pm
by 60766244
Bantum wrote:Yeah sorry guy's, I haven't got round to checking all the facts, just did a quick cut & paste job ... :)



I might have to go over the list again, as there are a few error's & omissions + heaps more detials to add. Can you please advise what is the best way to make corrections + add info to the wiki site now that is up & running ?

P.S. - Have you sorted out editing privilages yet ? as there is also stuff on wiki that dosn't need to be there ... :shock:

P.P.S. + If I do make changes to the source - I'll notify you.

Cheers, Bantum.
See below. :)

Sorted editing this arvo... (I think) :rolleyes:

Everyone who wants to contribute to the wiki must do the following

If it's something simple and you're not interested in going full-bore into wiki-making, just PM me or hit me up on the 'talk' or 'discuss' page on the wiki. Alternatively, drop the info into this thread and I will work it from there.

Instructions:
- Read this entire post before editing.
- Read all of it.
- Go onto ausubaru.wikidot.com
- Try 'edit' something.
- You will be prompted to create a wikidot account.
- You must create a wiki-dot account.
- You should be able to edit articles and rename and create pages
- You will not be allowed to delete pages or anything like that - talk to me if you want something removed, pages deleted or something drastic like that.
- You cannot re-name a page once created. If you do, all the information on it will be lost forever. Be aware of this.
- Before editing ANY article, make a copy of the code (text shown in the edit-box) and save it in Notepad, this means if the fecal matter hits the fan, you can simply copypaste your way back to safety.
- Don't wipe out any info (unless grossly inaccurate), remove anyone's credit where due or cause general mayhem.
- No rudeness/swearing/politics/opinions or any of that other banned stuff, this is about classic Subarus and that's it.
- PM me here every time you edit something, just so I can keep tabs on what's what.
- If something goes horribly wrong - let me know, I'll see if I can rescue it.
- If you want to be credited with your edit or info, you may add your name to the bottom of the page you edited. Add your name only, do not add lots of '!!!' or '>>>>>NAME<<<<' to make it obvious you edited it. Keep it clean.
- Add sources where possible below the credits section. Link them neatly. If you can't, again, contact me, I'll do it.

Tips:
- Follow the guidelines on the front page of the ausubaru.wikidot.com
- If you don't like formatting/grammar or making things neat, it's best to PM me with your article/info or edit with all the features mentioned on the wikidot that you can add as stated on the front page - I'll simply do it for you and make sure it goes off without a hitch.
- Look at the code as it is on the pages, try not to mess with it or the formatting, the buttons at the top of the edit-box will give a guide.
- It's best to PREVIEW all articles before saving, make sure everything you've done is neat and makes sense.
- Proof-read - again and again.
- Spell-check is our friend.
- Copy-Paste your code often into note-pad, as a reference and as a guide, or if something goes wrong.
- Try keep articles non-personal, and factual. State where only anecdotal evidence has been found. (this I am working on editing out of the webarchive-rescued articles)
- Add photos where relevant - I'm working on getting some photos into existing content. Please do-so too.
- If someone edits your work, or adds too it, great
- NO TYPING WHOLE LINES, PARAGRAPHS OR TITLES IN CAPSLOCK - I will delete all sections irrespective of nature found to have this. I'm working to remove all existing capitalization from the existing text. Full capitalization is hard to read and painful.
- Have fun.
- No MSN talk or strange language.

I hope all this works out, the above text makes sense and this wiki can continue to grow. :)

Any questions the site cannot answer, hit me up.

Cheers,

More Bookmarks Up

Posted: Tue Nov 20, 2012 10:24 pm
by 60766244
TOONGA - All the links you emailed me are up on the page. I will sort them as time permits into categories on the site to make better use of the links. Thank you.

Cheers.

Wiki pages ...

Posted: Wed Nov 21, 2012 4:59 pm
by Bantum
I had another look at the site & it is coming along, allthough the formatting for the 'Engine' page is all wrong ... :( I will have a go at fixing it when I can.

P.S. - The engine list part should be moved under 'general' with heading of 'subaru engines' while the engine mods & repairs etc. left separate in 'workshop' pages.

Cheers, Bantum.

Posted: Thu Nov 22, 2012 12:46 pm
by El_Freddo
If you're after links, check out the stickies in the tech sub forums. There's some great stuff there but it might be worth checking with the OP if it's ok to add it to the manual.

I'm amazed at how quickly and efficiently you've got this up and running!

Cheers

Bennie