Forester 05-08 rear springs (aftermarket) soon to be avialable

sven '2' · Post by **sven '2'** » Fri Jan 16, 2009 9:46 am

good news for forester owners

As most will know, rear OME springs are soft / sag quickly and are useless for towing. Industrial Springs http://www.industrialsprings.com.au are producing a std height HD and a raised height version.

First run due in Feb - will keep you posted

sven

Xtreme_RX · Post by **Xtreme_RX** » Fri Jan 16, 2009 6:05 pm

King Springs have theirs on the shelf....

sven '2' · Post by **sven '2'** » Fri Jan 16, 2009 11:19 pm

...if you like King Springs. Never have been impressed with them (or their service), but that's only my opinion/expeirence.

Sven

Xtreme_RX · Post by **Xtreme_RX** » Sat Jan 17, 2009 7:36 am

King are difficult to deal with unless you have an account with them...
A lot like most big wholesale company's....

tasscube · Post by **tasscube** » Sat Jan 17, 2009 8:23 pm

I have been running pedders coils on my 00 forrie for over 4years now with no probs standard height, which still will raise them approx 1cm or more. Back end was seriously sagged out after only 40k ! I have heard that self levelling suspension will not respond once a stiffer coil is put on, maybe but then I never did think they worked anyway. !