raised springs

twilightprotege · Post by **twilightprotege** » Tue Mar 10, 2009 2:05 pm

on my RX, what's the most you can increase the height of the springs without getting in to shock or cv trouble? inch? 2? 3?

i'm trying to get the body of the car higher without going more than my current 2" lift kit

Xtreme_RX · Post by **Xtreme_RX** » Tue Mar 10, 2009 6:12 pm

The rear you can get away with 30mm.
The front is only about 25mm.

The only problem with suspension lift in Subaru's is it limits down travel.

Post by **Alex** » Tue Mar 10, 2009 7:48 pm

yeah dont go more than one inch in the front. That what im running atm, and it is pushing it abit.

alex

twilightprotege · Post by **twilightprotege** » Tue Mar 10, 2009 8:51 pm

so even with the aurora (industrial springs) ones that are inch and a half raised (and some 300lb/ft spring rate), they are too tall?

Xtreme_RX · Post by **Xtreme_RX** » Tue Mar 10, 2009 8:59 pm

For the front - Yes.
Rear - you could getaway with it...