Will this kit fit my 85L?

Tips & Tricks to get the most out of your ride ...
Post Reply
User avatar
the boy from tas
Junior Member
Posts: 3
Joined: Thu Feb 11, 2010 7:13 pm
Location: Launceston, TAS

Will this kit fit my 85L?

Post by the boy from tas » Tue Jun 01, 2010 1:04 pm

please see attached picture and tell me if its the right kit..
thanks guys
Attachments
lift.jpg
lift.jpg (116.75 KiB) Viewed 1865 times

User avatar
brumbybear
Junior Member
Posts: 96
Joined: Fri Jan 29, 2010 2:21 pm
Location: Burnie / Tasmania

Post by brumbybear » Tue Jun 01, 2010 1:38 pm

where are your strut tops???
Im looking for a cheap second hand 2-4" lift kit for my brumby... if u have one pm me plz

User avatar
the boy from tas
Junior Member
Posts: 3
Joined: Thu Feb 11, 2010 7:13 pm
Location: Launceston, TAS

Post by the boy from tas » Tue Jun 01, 2010 3:20 pm

brumbybear wrote:where are your strut tops???
ive got them. just not in the photo.

User avatar
Venom
General Member
Posts: 1044
Joined: Sun Feb 03, 2008 10:04 am
Location: Ballarat

Post by Venom » Tue Jun 01, 2010 3:56 pm

Looks like the 3" BYB kit i sold on ebay. If it is then it should fit. The lift kit was made for an L series with power steering rack. If you have a manual steering rack then the steering extension won't be the right size, but everything else should be ok.
[SIGPIC][/SIGPIC]

User avatar
the boy from tas
Junior Member
Posts: 3
Joined: Thu Feb 11, 2010 7:13 pm
Location: Launceston, TAS

Post by the boy from tas » Fri Jun 04, 2010 12:22 am

Venom wrote:Looks like the 3" BYB kit i sold on ebay. If it is then it should fit. The lift kit was made for an L series with power steering rack. If you have a manual steering rack then the steering extension won't be the right size, but everything else should be ok.
yeah thats where i got it so guess its yours! small world ;)
well i was looking around and and can see where most things are going to fit in, apart from the solid metal plate bit. and the two small black bushes..
any help would be appreciated.

User avatar
daza
Junior Member
Posts: 529
Joined: Tue Oct 04, 2005 10:00 am
Location: Hervey Bay QLD

Post by daza » Fri Jun 04, 2010 7:44 am

the boy from tas wrote: well i was looking around and and can see where most things are going to fit in, apart from the solid metal plate bit. and the two small black bushes..
any help would be appreciated.
The Metal Plate goes between the diff and the diff carrier to space the diff down.
The two 1" black blocks go under the tailshaft center bearing mounts.
Daza
:D
[SIGPIC][/SIGPIC]

User avatar
strechy1
Junior Member
Posts: 11
Joined: Mon Sep 07, 2009 6:14 pm
Location: Perth WA Greenmount

Post by strechy1 » Sun Sep 19, 2010 9:33 am

Hi do you have or do you know of an install or fitting instructions to put a 2" lift on a L series wagon .I could go in and gues but it would be easier to follow a diagram.
Thanks Jon

User avatar
Gannon
Senior Member
Posts: 4580
Joined: Sat Nov 05, 2005 10:00 am
Location: Bowraville, Mid Nth Coast, NSW

Post by Gannon » Sun Sep 19, 2010 10:40 am

Can you keep all the old bolts you remove from your car and give them to me?
Current rides: 2016 Mitsubishi Triton GLS & 2004 Forester X
Ongoing Project/Toy: 1987 RX Turbo EA82T, Speeduino ECU, Coil-pack ignition, 440cc Injectors, KONI adjustale front struts, Hybrid L Series/ Liberty AWD 5sp
Past rides: 92 L series turbo converted wagon, 83 Leone GL Sedan, 2004 Liberty GT Sedan & 2001 Outback
------------------------------------------

Post Reply

Return to “Suspension - Shocks, Springs and Upgrades”