Merry christmas and all that. Ive been doing some work over the holidays and I've reached the point of replacing my front front lower control arm bushes and don't really like how theyre sitting in the retainer. I'm down south at the moment and most places here have proven to be useless.
They just don't seem to go in properly, theres a couple mm gap between them when sandwiched and they sit tight on the bracket on the subframe as they seem to poke out further than the inner sleeve. They are part # 45474 and appear to be sort of the right one... I'm just concerned about them chopping out on the brackets. Here's some pics, I'd like to know pretty soon if they are going to be alright as I'll probably have to take a trip to perth to get replacements by the looks of it.
Help Needed! LCA Nolathane Replacements!
Help Needed! LCA Nolathane Replacements!
- Attachments
-
- IMG_20121227_095825.jpg (48.12 KiB) Viewed 740 times
-
- IMG_20121227_095807.jpg (47.96 KiB) Viewed 741 times
-
- IMG_20121227_095748.jpg (35.7 KiB) Viewed 742 times
-
- IMG_20121227_095735.jpg (29.47 KiB) Viewed 744 times