Front shocks rubbing on MY

Cam · Post by **Cam** » Mon Oct 22, 2007 2:57 pm

Just put a 3 inch lift in the brumby and when back on the ground noticed that the spring retainer (not sure what it called just the plate which holds the top of the spring...) at the top was jammed against the back of the tower where there's a bulge for the brake booster on both sides so that the wheels couldn't turn, not sure what i've done wrong here as the strut lift blocks are in the right way and everything else seems to be ok...

90brumby · Post by **90brumby** » Mon Oct 22, 2007 6:22 pm

i believe theres a lump like u say that needs to be beatin inwards to allow 4 the strut to fit

well there was on my brumby anyway

bluesteel · Post by **bluesteel** » Mon Oct 22, 2007 6:28 pm

yep... get a big hammer out and "massage" a spot for the strut to fit comfortably

Matatak · Post by **Matatak** » Mon Oct 22, 2007 7:29 pm

how come u havent been out on any trips yet. ur a WA boy and now ur brumbys lifted. means time to play.

Cam · Post by **Cam** » Tue Oct 23, 2007 1:26 pm

yeah i need a bigger hammer, ill give it a shot tomorrow, as for not going on any trips, the cars not going, trying to finish ej conversion, just done g'box crossmember need tailshaftand cv's nad a few bits and pieces...

SuBaRiNo · Post by **SuBaRiNo** » Tue Oct 23, 2007 7:57 pm

Yeah u need to bash it... where ya located Cam?

Dave

Matatak · Post by **Matatak** » Tue Oct 23, 2007 8:13 pm

ellenbrook way he is.

organize a date and we can help ya crank this EJ out.

Subafury · Post by **Subafury** » Tue Oct 23, 2007 9:02 pm

sounds like a good idea if he's keen

Cam · Post by **Cam** » Wed Oct 24, 2007 11:58 am

Yeah Henley Brook next to ellenbrook, as for the car i'm a bit behind in uni assignments so that's slowing down @ the moment. Thanks for the offer tho, might need to take you up on that one day in the near future.