Page 1 of 1
raised springs
Posted: Tue Mar 10, 2009 2:05 pm
by twilightprotege
on my RX, what's the most you can increase the height of the springs without getting in to shock or cv trouble? inch? 2? 3?
i'm trying to get the body of the car higher without going more than my current 2" lift kit
Posted: Tue Mar 10, 2009 6:12 pm
by Xtreme_RX
The rear you can get away with 30mm.
The front is only about 25mm.
The only problem with suspension lift in Subaru's is it limits down travel.
Posted: Tue Mar 10, 2009 7:48 pm
by Alex
yeah dont go more than one inch in the front. That what im running atm, and it is pushing it abit.
alex
Posted: Tue Mar 10, 2009 8:51 pm
by twilightprotege
so even with the aurora (industrial springs) ones that are inch and a half raised (and some 300lb/ft spring rate), they are too tall?
Posted: Tue Mar 10, 2009 8:59 pm
by Xtreme_RX
For the front - Yes.
Rear - you could getaway with it...