The AUSubaru.com.au Forums

Posted: **Sat Jun 20, 2009 5:31 pm**

Hi
I was just wondering how you adjust the front suspension on a 92 brumby. There is two bolts with two nuts on each either side of the strut just under the spring, is this it? there is a few centimetres of adjustment.
thanks

Posted: **Sat Jun 20, 2009 7:16 pm**

turn them and count the turns to the height u want .so that are all the same .

Posted: **Sat Jun 20, 2009 7:41 pm**

Yes they are the adjusters, as said above turn each one the same amount until you get the required height. You need to jack the car to do it.

Posted: **Sun Jun 21, 2009 4:58 pm**

ok thanks for the help

Posted: **Sun Jun 21, 2009 7:02 pm**

22 mil spanner I think???

Posted: **Tue Jun 30, 2009 2:33 pm**

How far can the front be adjusted in this way? Are we talking 2cm or 10cm?

The AUSubaru.com.au Forums

adjusting brumby front suspension

adjusting brumby front suspension