Brumby lift kit (WHERE CAN I GET 1???)

Tips & Tricks to get the most out of your ride ...
Post Reply
User avatar
Feralbrat87
Junior Member
Posts: 5
Joined: Tue Jun 08, 2010 9:38 am
Location: Baulkham Hills N.S.W

Brumby lift kit (WHERE CAN I GET 1???)

Post by Feralbrat87 » Wed Jun 09, 2010 9:51 am

every site i email or call the number no one answers or replies????
someone has 2 know where i can purchase a lift kit
PLEASE HELP!!!!

User avatar
AndrewT
Senior Member
Posts: 4777
Joined: Tue Oct 04, 2005 10:00 am
Location: WA
Contact:

Post by AndrewT » Wed Jun 09, 2010 11:33 am

Where have you tried?

User avatar
Feralbrat87
Junior Member
Posts: 5
Joined: Tue Jun 08, 2010 9:38 am
Location: Baulkham Hills N.S.W

Post by Feralbrat87 » Wed Jun 09, 2010 11:49 am

hi-rise subaru
the email address shown in a thread on this forum
scorpion subaru

i get no reply from emails what so ever or get delivery notifications sayin it cant be sent

User avatar
TOONGA
Elder Member
Posts: 5339
Joined: Sat May 30, 2009 10:15 am
Location: Mandurah where they divided by zero
Contact:

Post by TOONGA » Wed Jun 09, 2010 12:01 pm

Hi rise no longer exists and as I understand it scorpion don't either

http://www.ausubaru.com/index.php?pageid=liftkits

there are kits available through the board at the link above

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
AndrewT
Senior Member
Posts: 4777
Joined: Tue Oct 04, 2005 10:00 am
Location: WA
Contact:

Post by AndrewT » Wed Jun 09, 2010 12:47 pm

also try contacting the guy who makes them directly. (per the sticky thread at the top of this section).
showthread.php?t=11668

User avatar
Venom
General Member
Posts: 1044
Joined: Sun Feb 03, 2008 10:04 am
Location: Ballarat

Post by Venom » Wed Jun 09, 2010 1:04 pm

Crossbred Performance are making kits and i would recommend using them. I just installed a crossbred lift in my Liberty and i was very happy with the quality and service, well worth paying the extra for a Crossbred kit.

email them at: [email protected]
[SIGPIC][/SIGPIC]

User avatar
Feralbrat87
Junior Member
Posts: 5
Joined: Tue Jun 08, 2010 9:38 am
Location: Baulkham Hills N.S.W

Post by Feralbrat87 » Wed Jun 09, 2010 1:32 pm

TOONGA wrote:Hi rise no longer exists and as I understand it scorpion don't either

http://www.ausubaru.com/index.php?pageid=liftkits

there are kits available through the board at the link above

TOONGA
I emailed on monday... NO reply

User avatar
Feralbrat87
Junior Member
Posts: 5
Joined: Tue Jun 08, 2010 9:38 am
Location: Baulkham Hills N.S.W

Post by Feralbrat87 » Wed Jun 09, 2010 1:35 pm

starting to think that people just dont want my money at this point in time:mad::mad::mad:

User avatar
Feralbrat87
Junior Member
Posts: 5
Joined: Tue Jun 08, 2010 9:38 am
Location: Baulkham Hills N.S.W

Post by Feralbrat87 » Wed Jun 09, 2010 1:35 pm

thank you venow, i emailed crossbred just not, hope to get a reply :)

User avatar
AndrewT
Senior Member
Posts: 4777
Joined: Tue Oct 04, 2005 10:00 am
Location: WA
Contact:

Post by AndrewT » Wed Jun 09, 2010 2:44 pm

try PM'ing SWK as per the link I pasted too. Worth a shot.

User avatar
AndrewT
Senior Member
Posts: 4777
Joined: Tue Oct 04, 2005 10:00 am
Location: WA
Contact:

Post by AndrewT » Wed Jun 09, 2010 2:46 pm

also, it's worth baring in mind it's pretty decent that you can still get any kind of aftermarket accessory for cars as old as ours. We are lucky there are still some enthusiasts putting in the time to make these kits. Afaik there isn't much money in it.

User avatar
78sti
Junior Member
Posts: 201
Joined: Tue Oct 14, 2008 10:20 pm
Location: Cashmere - Brisbane

Post by 78sti » Wed Jun 09, 2010 3:26 pm

You could try boxer service in brendale (brisbane), They use to make a very good one.

Not sure if they still do though?

User avatar
AlpineRaven
Senior Member
Posts: 3682
Joined: Wed Oct 19, 2005 10:00 am
Location: Melbourne, Victoria, Australia.

Post by AlpineRaven » Wed Jun 09, 2010 3:40 pm

So Hi Rise Subaru is finished now? Ive been waiting for some replies from them - its all dead at the moment....
Cheers
AP
Subarus that I have/had:
1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic
Image

User avatar
AndrewT
Senior Member
Posts: 4777
Joined: Tue Oct 04, 2005 10:00 am
Location: WA
Contact:

Post by AndrewT » Wed Jun 09, 2010 4:27 pm

do a quick seach for HiRise on this forum, you will find a post from me every few months informing people that they are out of buisness. It's been years and years now lol :) They won't take their stupid website down!

User avatar
spike
General Member
Posts: 1153
Joined: Wed Jan 21, 2009 12:28 pm
Location: gawler south AUS

Post by spike » Wed Jun 09, 2010 5:07 pm

mmm
you culd try subarwreck in adelaide
i think they have acesess to them

User avatar
AlpineRaven
Senior Member
Posts: 3682
Joined: Wed Oct 19, 2005 10:00 am
Location: Melbourne, Victoria, Australia.

Post by AlpineRaven » Thu Jun 10, 2010 8:35 am

AndrewT wrote:do a quick seach for HiRise on this forum, you will find a post from me every few months informing people that they are out of buisness. It's been years and years now lol :) They won't take their stupid website down!
Website is misleading!!!!! Shouldve been removed by now if your not dealing with it..
Cheers
AP
Subarus that I have/had:
1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic
Image

User avatar
spike
General Member
Posts: 1153
Joined: Wed Jan 21, 2009 12:28 pm
Location: gawler south AUS

Post by spike » Thu Jun 10, 2010 9:03 am

thats just so weird....
theyre paying for space, i suppose i dont know the internet too well but theyre not getting anything wow
just stupid really

User avatar
brumbybear
Junior Member
Posts: 96
Joined: Fri Jan 29, 2010 2:21 pm
Location: Burnie / Tasmania

Post by brumbybear » Sat Jun 12, 2010 9:56 am

i wish they were still open i wanted the monster lift 6" kit ... lol
Im looking for a cheap second hand 2-4" lift kit for my brumby... if u have one pm me plz

Post Reply

Return to “Suspension - Shocks, Springs and Upgrades”