Page 1 of 1
brumby
Posted: Sun Dec 12, 2010 7:29 pm
by subarubrumby
what will be the best shcoks for my brumby to set it up for drifting ??:twisted:
lol drifting a brumby...
Posted: Sat Dec 18, 2010 4:36 pm
by ORX-18
so you want to drift a brumby. Best shocks you say? Convert the arse end to wrx and get rid of the torsion bar setup, run 5 stud everything and brakes and get a set of liberty HKS Hyper D coilovers, 700lb springrates.
After you have robbed the bank to do this, we will talk about the front......
Posted: Sun Dec 19, 2010 4:18 pm
by brumbyrunner
Shocks?
How have you stopped the rear diff from flogging around and trying to tear itself out?
Posted: Sun Dec 19, 2010 7:31 pm
by Green_eyed_liberty
step one: take shocks out
step two: replace with steel bars
step three: how the hell do you even have enough power to hold a slide?
Posted: Sun Dec 19, 2010 8:03 pm
by littlewhiteute
subarubrumby wrote:what will be the best shcoks for my brumby to set it up for drifting ??:twisted:
Drifting a Brumby, you're kidding.
You need a car with a low centre of gravity for drifting.
Posted: Sun Dec 19, 2010 8:12 pm
by TOONGA
littlewhiteute wrote:Drifting a Brumby, you're kidding.
You need a car with a low centre of gravity for drifting.
yeah like this
TOONGA
Posted: Mon Dec 20, 2010 9:53 am
by spike
well it seems everyone here doesnt think its possible.....
But anythings possible =)
crank the torsion rear end down as soft as it will go.
Put teins all round
Get a turbo
And maybe you can do it.
Honeslty its possible but bloody hard, way to much money and little gain, you really still want to? Get a WRX and do the swap
Posted: Mon Dec 20, 2010 10:20 am
by 78sti
LOL!!
Koni adjustables and make them real hard and respline the torsion bar lower
maby an oil tap over the rear tyres to lower traction
Probaly will end up breaking something dumping the clutch from high rpm to get a little squeek from the rear tyres!
Also mod the front torsion bar and put in the rear or custom.
Posted: Mon Dec 20, 2010 10:21 am
by 78sti
Also mod the front torsion bar and put in the rear or custom.
LOL i should have said sway bar!
Posted: Mon Dec 20, 2010 10:29 am
by subarubrumby
haha its quite funny because i can drift this, all through the industrial streets, ive got a video of drifting around the rounda bout 3 times, dont want to put it on youtube just incase i get done by the cop dogs,
Posted: Mon Dec 20, 2010 10:50 am
by Alex
was it raining?
i drifted my unicycle once
Posted: Mon Dec 20, 2010 10:55 am
by 78sti
LOL
I am sure that any rwd car can go sideways around a cnr if you push it hard enough and to the Scandinavian flick to get it going.
But there is a big difference form a bit of sideways action and real drifting!
Drifting requires enough power to break rear traction at high speed and hold it there.
I am sure that their would be very few competitive drift cars with less than 200kw. I think a ea81 is about 60kw and at best 80 with mods.
Cheers to you for having a bit of fun but it is not drifting!
Anyway post the video and prove us all wrong!