Page 1 of 1
Tips for removing lift kit.
Posted: Mon Jun 27, 2011 6:27 pm
by jiggabite
Hi there, joined as I am after some advice on removing my lift kit that's installed in my forester!
Currently has one of the scorpion subaru kits installed with 35mm king springs on the stock subaru KYB struts.
Some pictures of the lift
Cheers
Taelor
Posted: Mon Jun 27, 2011 6:36 pm
by Green_eyed_liberty
was waiting how long it would take you to join up to a subaru 4x4 club
Tony
GT_Tony.. 84DGT
Posted: Mon Jun 27, 2011 6:54 pm
by jiggabite
haha, that's funny, didn't even know it was you.
I was looking at your brumby lift thread earlier and was considering asking you for help!
Posted: Mon Jun 27, 2011 9:57 pm
by phil nelis
try sending a message to yarney on this site. he,s doing up a gt forry so he might be interested.
Posted: Tue Jun 28, 2011 12:23 pm
by jiggabite
..
Posted: Wed Jun 29, 2011 12:21 am
by El_Freddo
Go to a wreckers and pull all the nuts and bolts out for an impreza of the same year on all of the suspension mounts. You'll also need the steering extension if its a full body lift - if it's only strut lift you don't need new bolts, just use the ones that are on the top of the strut when you remove the strut spacers
The impreza and foz were made on the same floor pan so all suspension mounting points and bolts should be the same. I doubt it will cost $100.
Also start a thread over on
offroadsubarus, there might be a member over there that's keen for a lift.
Cheers
Bennie
Posted: Wed Jun 29, 2011 10:11 pm
by jiggabite
...
Posted: Wed Jun 29, 2011 10:58 pm
by El_Freddo
jiggabite wrote:What is this steering extension I need? Is it a pretty standard part for the forester?
Its the little knuckle piece between the steering rack steering shaft and the steering column. It should look something like this:
Pic stolen from many places on this site. Bottom one is from an outback, dunno where the top one is from. You'll want one that's forester specific
Cheers
Bennie
Posted: Thu Jun 30, 2011 9:37 am
by jiggabite
..
It's been removed now. If anyone is interested in the kit please PM me.
Cheers
Posted: Sun Jul 03, 2011 7:36 pm
by jiggabite
The kit has been removed and is now for sale.
2" lift kit with raised king springs on KYB forester struts and stock GX exhaust which has been bent up to meet the body.
The lift was performed by Scorpion Subaru in Capalaba by the previous owners quite a few years ago when they first got the car.
Price: $400 ono PM for more pictures and details
Posted: Thu Jul 07, 2011 8:07 pm
by jiggabite
Bump, cheap postage anywhere in Australia, if you are just interested in the lift kit without the struts, springs and exhaust we can work something out.
Posted: Tue Jul 12, 2011 3:40 pm
by jiggabite
Sold now.