The AUSubaru.com.au Forums

Im getting a little tired of the body roll in my lifted L, and want to put a rear sway bar in to stop it a bit. I need some advice. Methods? Prices? Types? anything at all. All i know is that small ones came stock on RX L's, and not on touring wagons, so id have to get a bit welded on somewhere. Plz reply with some advice.

Josh

all you need is to do is swap rear control arms off of a L series turbo onto your car and that'll give you the mounts for the swaybar. I can sell you everything you need including the swaybar, but I dunno what condition the wheel bearings are in, and i think at least 1 of the swaybar mount rubbers would need replacing. Send me a private message if you're interested.

I reckon it makes my car sit alot flatter, can carry alot more mid corner speed, but i'm not the right person to ask in regards to a lifted car.

timmo

wt about some strut braces..may be possible for the front but the rears dont have struts do they

Josh i have some rear control arms and a swaybar if you are interested.