Page 1 of 1
front spring height brumby
Posted: Sat Oct 20, 2007 6:35 am
by camo85
does anyone know the height of the original front springs of a brumby uncompressed
Posted: Sat Oct 20, 2007 11:09 am
by Matatak
if i can find my old crap things ill give em a quick measure.
might not be til tomorrow or a bit later but wont be here this weekend.
if no1 says ill measure em up for ya a bit later on.
Posted: Tue Oct 30, 2007 8:42 pm
by Matatak
sorry mate completely forgot. but just went out then and did some measurements.
Spring height uncompressed i got - 32.5cm
a standard shock with strut pushed allthe way in - around 42cm
a standard shock with strut pulled all the way out - around 55.5cm
complete shock with nuts wound all the way out for some extra hieght - around 56cm
measurements were from very bottom to very top of the stuff i measured.
also had to guess for the struts as the spring base interfers with tryna get a tape measure on properly lol.
also i didnt actually think u culd get 2 inch lifted springs (in reply to ur PM so every1 else isnt to confused lol)
dunno where ud get longer struts from either
hope it helps ya
Posted: Wed Oct 31, 2007 8:11 pm
by camo85
well
the springs r only 35.5cm uncompressed so the only 1inch taller
Posted: Wed Oct 31, 2007 8:18 pm
by Matatak
well compressed they may have 2 inchs more height as they are most probably thicker coils and maybe more of them.