Page 1 of 1
Front shocks rubbing on MY
Posted: Mon Oct 22, 2007 2:57 pm
by Cam
Just put a 3 inch lift in the brumby and when back on the ground noticed that the spring retainer (not sure what it called just the plate which holds the top of the spring...) at the top was jammed against the back of the tower where there's a bulge for the brake booster on both sides so that the wheels couldn't turn, not sure what i've done wrong here as the strut lift blocks are in the right way and everything else seems to be ok...
Posted: Mon Oct 22, 2007 6:22 pm
by 90brumby
i believe theres a lump like u say that needs to be beatin inwards to allow 4 the strut to fit
well there was on my brumby anyway
Posted: Mon Oct 22, 2007 6:28 pm
by bluesteel
yep... get a big hammer out and "massage" a spot for the strut to fit comfortably
Posted: Mon Oct 22, 2007 7:29 pm
by Matatak
how come u havent been out on any trips yet. ur a WA boy and now ur brumbys lifted. means time to play.
Posted: Tue Oct 23, 2007 1:26 pm
by Cam
yeah i need a bigger hammer, ill give it a shot tomorrow, as for not going on any trips, the cars not going, trying to finish ej conversion, just done g'box crossmember need tailshaftand cv's nad a few bits and pieces...
Posted: Tue Oct 23, 2007 7:57 pm
by SuBaRiNo
Yeah u need to bash it... where ya located Cam?
Dave
Posted: Tue Oct 23, 2007 8:13 pm
by Matatak
ellenbrook way he is.
organize a date and we can help ya crank this EJ out.
Posted: Tue Oct 23, 2007 9:02 pm
by Subafury
sounds like a good idea if he's keen
Posted: Wed Oct 24, 2007 11:58 am
by Cam
Yeah Henley Brook next to ellenbrook, as for the car i'm a bit behind in uni assignments so that's slowing down @ the moment. Thanks for the offer tho, might need to take you up on that one day in the near future.