UHF Mounting, Mysterious wires and plug??

93_Subi · Post by **93_Subi** » Mon Nov 20, 2006 10:56 pm

Gday folks..

So i had a few ideas of where i could mount a nice little UHF GMEtx3200 or the like... But my mate's giving me a older din sized UHF for free.. so i aint gona spend 300 odd on a newie.. My question is where does everyone mount their CB's in the L Series Wagons?? Got a couple of ideas.. Just wondering what everyone else has done.. Pics would be great please

Also in my glove box hanging down from inside the dash is 2 wires which go into a plug which is just hanging there.. in this format - l looks like those spade conectors or another plug would go into it.. is this possibly an aftermarket power source for a CB? But i cant find any holes where a CB or Antenna wouldve been mounted.. Or is it a subaru factory bit for something??

Cheers,

Matt

fredsub · Post by **fredsub** » Tue Nov 21, 2006 7:38 am

you can always mount it on a bracket, on the passenger side of the drive tunnel.
Them wires might be to the light bulb that sits at the bottom of the dash somewhere.....throws some light from the cig plug..etc.

93_Subi · Post by **93_Subi** » Tue Nov 21, 2006 12:14 pm

Yeah on the passenger side of the tunnel was my 1st thought.. Then i thought well could it fit in under the CD player if i made a custom suround/spacer to replace the one thats there at the moment... hmm..

Fang · Post by **Fang** » Tue Nov 21, 2006 1:10 pm

Mines a full face Uniden - mounted thusly (under the stereo) -:

The wires you mentioned aren't from a glovebox light are they?

93_Subi · Post by **93_Subi** » Tue Nov 21, 2006 1:50 pm

Hey Fang. that looks very clean and tidy.. just what im after.. Glovebox light hey.. well there isnt one coming on when its open so maybe.. good point.. cheers..

Matt

Post by **Alex** » Tue Nov 21, 2006 11:20 pm

i know yours is a full DIN size, but this is how mine went in...fitted exactly in the cigarette tray bit!

alex

93_Subi · Post by **93_Subi** » Wed Nov 22, 2006 12:09 am

Cheers Alex.. yep thats where i was thinkin of puttin a slim one like yours.. spose i could still do that and reposition the cigi lighter... hmm.. Looks like ive got the same CD Player spacer as you.. but mines upside down 2 yours.. hole at the top.. removable pannel at the bottom.. switches loook good in there..

Thanx..

Matt

AndrewT · Post by **AndrewT** » Wed Nov 22, 2006 1:23 am

I installed a CB which is the type where the control panel is separate to the main box. This allowed me to mount it in the little sunglasses holder on the right side of the dash. The main unit is mounted behind the dash board and totally invisible.
The Mic ended up in a very convinient location, the main advantage being that the Mic cord doesn't get in the way (it doesn't have to stretch in front of the steering wheel from the left side of the car).

http://members.iinet.com.au/~carine3/CB.JPG

** sorry, didn't have time to slosh 20 litres of Armour-all over it like Alex

Post by **Alex** » Wed Nov 22, 2006 9:47 pm

my facia is upside down, i had to do this because of the massive RCA leads im running...

also Andrew....there is ZERO armor-all on there...its actually very dirty after doing circle work in sand with all the windows down

alex

mattims · Post by **mattims** » Wed Nov 22, 2006 11:22 pm

i hope you werent abusing that LSD ...

SuBaRiNo · Post by **SuBaRiNo** » Wed Nov 22, 2006 11:22 pm

AndrewT is running the GME TX3400 just for the record.

Dave

93_Subi · Post by **93_Subi** » Fri Nov 24, 2006 12:24 am

Cheers Dave, Saw that.. Yeah i was doin my detective work 2..
Hey what else's Tafe for??? haha..\

Matt

D3V1L · Post by **D3V1L** » Fri Nov 24, 2006 12:37 am

btw mattims....yes..that lsd got 1 hell of a work out that night

dave

Post by **Alex** » Fri Nov 24, 2006 7:05 pm

hrmmm...it sure did

alex