Page 1 of 1
Does anyone have 6 x 9 instructions?
Posted: Fri Sep 18, 2009 5:42 pm
by kona480
Hi
i got some MTX 6x9's today but they don't have any instructions in the box. I was wondering if anyone on here knew of a website that i could find them on. I tried the MTX website
thanks
Posted: Fri Sep 18, 2009 8:58 pm
by tex
When I got my rockford stuff the specs were on the box but what did you need to know?
Posted: Sat Sep 19, 2009 11:02 am
by kona480
just the basics i suppose. I've never installed anything like that as it is my first car
Posted: Wed Sep 23, 2009 5:50 pm
by SUBIIE
speakers are easy as. have you got boxes for tem or are you going to mount them in the doors?
The best tip ever is to get the expenzive thick speaker wire, as it doesnt matter how much you paid for your seakers, with crappy factory wire it will always sound s*#t.
Posted: Thu Sep 24, 2009 12:02 pm
by kona480
SUBIIE wrote:speakers are easy as. have you got boxes for tem or are you going to mount them in the doors?
The best tip ever is to get the expenzive thick speaker wire, as it doesnt matter how much you paid for your seakers, with crappy factory wire it will always sound s*#t.
They are in boxes. Coming out of the stereo in the plug there is four sets of wires coming out for each speaker ( front/rear/left/right ) so because it only had two speakers in the front, I wired the new speakers into the rear slots.
Posted: Sun Jun 13, 2010 10:43 am
by openflame06
Thats the best way. 6x9" speakers are generally in the rear to compliment/replace having a sub because they have good low frequency repsonse.