Bantum's Infotainment System

Collection of automotive design / construct projects by Bantum ...
User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

Alpine gear ...

Post by Bantum » Fri Feb 01, 2013 3:37 pm

Had a look at this Alpine Marine unit :

Image

I like some of the features ( it's water proof ) & it sorta of fits in with the peroid features of a Brumby + comes with a nifty remote ... :)

Image

Hmm, wonder where I can fit it ?

+ Time for some power :
Image

I'm thinking of getting two, one PDX-1.600M for Sub + run the Cap of it & another PDX-4.100M for doors ... :)

++ Somthing like this SWR-M100 to run off the Sub :

Image

+++ How about something for listing externally like a SPR-M700C ?

Image

User avatar
Alex
Elder Member
Posts: 5405
Joined: Wed Nov 23, 2005 10:00 am
Location: Perth
Contact:

Post by Alex » Fri Feb 01, 2013 4:42 pm

niterida wrote:
I have just done that and the JL Audio speakers at $1100 sounded worse than cheap JVC's at $149. My personal preference was for Hertz HSK - very good bass response.
I ended up buying Hertz copies from ebay - $130 delivered - and they are very well made and you can not tell them apart form the real thing :)
youre right about getting speakers which you personally prefer.

BUT, i disagree with you 150% about the hertz speakers. Im running GENUINE hsk 165s front stage in my liberty with focal polyglass splits in the back doors.

my mate also has the fake HSK hertz speakers which i installed for him, not even margianally close to the real deal. The bass these things can produce almost takes away the need for a sub.

With capacitors Bantum, theyre really only useful when youre running well over 1000W RMS. You can get a bigger battery(which youll need anyway) and the capacitor is useless.

If youre serious about the sound your getting, id recommend dynamatting your doors. The PDX series of amps youre looking at are fairly high end and its worth going the full hawk if youre using really good gear. I cant recommend alpine amps highly enough, the quality youre getting, even if theyre not overly cheap is great.

This is how i dynamatted up my Hertz speakers...bits everywhere i know, but its all about getting it as sealed as possible.

Image
my07 Outback
my13 Hyundai i45(shhhh)
my02 Gen3 Liberty limited ed.

previously
L-series wagon, LSD, EJ20turbo, 29in tyres, 'wanky wagon'
2000 gen3 outback, lifted, otherwise stock.

User avatar
niterida
General Member
Posts: 1158
Joined: Sun Apr 13, 2008 5:45 pm
Location: Geraldton WA

Post by niterida » Fri Feb 01, 2013 5:00 pm

Alex wrote:BUT, i disagree with you 150% about the hertz speakers. Im running GENUINE hsk 165s front stage in my liberty with focal polyglass splits in the back doors.

my mate also has the fake HSK hertz speakers which i installed for him, not even margianally close to the real deal. The bass these things can produce almost takes away the need for a sub.
Not sure what you mean - are you saying the fakes are crap and are too bassy ?

I haven't fitted mine yet - was just going on other peoples experiences on a car audio forum (one of the posters actually runs the forums and does comparisons for a living and he said he couldn't tell they were fakes).

Sorry fo the thread hijack :)
[SIGPIC][/SIGPIC]

User avatar
Alex
Elder Member
Posts: 5405
Joined: Wed Nov 23, 2005 10:00 am
Location: Perth
Contact:

Post by Alex » Fri Feb 01, 2013 5:21 pm

niterida wrote:Not sure what you mean - are you saying the fakes are crap and are too bassy ?

I haven't fitted mine yet - was just going on other peoples experiences on a car audio forum (one of the posters actually runs the forums and does comparisons for a living and he said he couldn't tell they were fakes).

Sorry fo the thread hijack :)
Sorry for my crappy wording haha (beer)

Build wise the fake HSKs looked the same, the voice coil is smaller though. Sound wise, they aren't for me.

The bass I was referring too is in regard to the genuine speakers, theyre an exceptional piece of equipment for the price (think I paid around $450, they were a new model at the time)

Im not judging what people think sound good though. Everyone has their own preference and I think people should stick to what they like.

Sent from my Motorola RAZR HD
my07 Outback
my13 Hyundai i45(shhhh)
my02 Gen3 Liberty limited ed.

previously
L-series wagon, LSD, EJ20turbo, 29in tyres, 'wanky wagon'
2000 gen3 outback, lifted, otherwise stock.

User avatar
niterida
General Member
Posts: 1158
Joined: Sun Apr 13, 2008 5:45 pm
Location: Geraldton WA

Post by niterida » Fri Feb 01, 2013 5:28 pm

I like BASS :)
[SIGPIC][/SIGPIC]

User avatar
Alex
Elder Member
Posts: 5405
Joined: Wed Nov 23, 2005 10:00 am
Location: Perth
Contact:

Post by Alex » Fri Feb 01, 2013 5:28 pm

Sorry for hijacking Bantum. You're doing a brilliant job!
my07 Outback
my13 Hyundai i45(shhhh)
my02 Gen3 Liberty limited ed.

previously
L-series wagon, LSD, EJ20turbo, 29in tyres, 'wanky wagon'
2000 gen3 outback, lifted, otherwise stock.

User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

Hi Jacked ?

Post by Bantum » Sat Feb 02, 2013 12:59 am

Image

This come's to mind - I should get one ... :)

User avatar
tex
Junior Member
Posts: 553
Joined: Tue Jul 24, 2007 9:42 pm
Location: OUTSIDE Canberra!
Contact:

Post by tex » Sat Feb 02, 2013 11:51 am

Well im a fan of my rockford fosgates same thing I have a sub for my brumby but its almost never in there as the 6.5 splits have plenty of bass and fortunately the tweeters mount anywhere because with the roof off it gets quite noisy at 120. Oh and a local car stereo store refuses to sell rockford because he doesn't like them but has only ever seen or used the budget ones whereas another store the other side of town swears by them and has them in his personal car, So the moral to the story is listen to the set up you are putting in as oposed to the one you think your putting in!
End my Hack (But mum everyone else is doing it)
87 targa brumby (Neglected),
92 targa brumby (weekend runabout),
97 Lifted Outback (Dailey drive),
05 outback safety (Too cheap to pass up),
90 model liberty (was to be scrapped instead sold to workmate)
+ others.

User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

Update ...

Post by Bantum » Fri Jun 21, 2013 10:55 pm

Ok - I've managed to find a pic with the very last bit of work done :

Image

Note : I've marked out a double DIN size to see what it would look like ...

I also found out Samsung have now done a 8'' note book that looks about right size, might have a go at it :

Image

More details here ...

Edit : I measured it out on the face plate and it does fit, but overhangs at bottom ...

Cheers, Bantum ...

User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

Mono ...

Post by Bantum » Wed Apr 02, 2014 11:38 pm

Scored one of these for nix ...

Image

Image

Image

I'm not sure if it works yet but hey, we can't all be picky ... :)

Cheers, Bantum ...

User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

Door Layouts ...

Post by Bantum » Thu May 22, 2014 3:38 am

Some layout pictures of doors :

Image

Image

Notes : I've plugged the old hole for the window winder, ready for relocating the 'new' electric window switch & roughly marked out speaker location ready for new grill ...

+ yep the lights were converted to LED ( see link ) & they are Liberty Gen 1 ? Door pockets ... :)

Link to LED Page : showthread.php?t=22456

Not sure if I'll end up using the full grill as doesn't quite fit ... :???:

Note : The 6" speaker is about 2-3cm bigger than the grill shown, hence the need for customising ...

That's about as far as I got so far ...

Cheers, Bantum ...

User avatar
El_Freddo
Master Member
Posts: 12499
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Sat May 24, 2014 11:59 am

Looks good mate. I like the door card layout you're going with - and I reckon those map pockets look awesome. The lights on the end of them are a nice touch too, I'm guessing you'll be hooking them up to the door switch? Individually or both to come on with the interior light?

And where'd you score an amp for nix??

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
Silverbullet
Senior Member
Posts: 2865
Joined: Mon Aug 23, 2010 6:20 pm
Location: Adelaide

Post by Silverbullet » Sat May 24, 2014 2:27 pm

And I wanna know how your door latch surrounds look so good :o
Will it ever end!?
-EA81 TWIN CARB!!!!
-L series 5 speed
-Custom paint job
-2" lift
-Full custom re-wire
-L series front end
Image

User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

Found ...

Post by Bantum » Sun May 25, 2014 1:04 pm

Its amazing what people throw out - Just 'found' the amp on foot path, haven't tested it yet to see if works ... :)
( Although I suspect it may have been abused, I can't see / smell any burnt circuits ) :neutral:

The door latch covers were painted by PO ( in vinyl paint ? ) - So not so good on closer inspection ... ;(

Pocket lights are intended to run of new circuit that could be switch by either doors or the main cabin light - haven't got round to the wiring in bits as yet.

Cheers, Bantum ...

User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

Fixer ...

Post by Bantum » Mon May 26, 2014 1:15 pm

I was just going back through my old photos & saw this :

Image

Shows the 'Fix' I came up with for securing the lower door panel & tools used ... :)

Note : I don't have a picture of the component parts like the counter sunk bolt that I used but ...

Cheers, Bantum ...

User avatar
zookcruzr
Junior Member
Posts: 55
Joined: Wed Apr 16, 2014 2:58 pm
Location: Port Stephens NSW

Post by zookcruzr » Wed Jun 04, 2014 3:10 pm

Any pics of the final door trims?
Where did ya get your elec window winders? From what model?
Never use big words where diminutive ones would suffice.

User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

Door Skins ...

Post by Bantum » Thu Jun 05, 2014 2:46 am

Hi Zook,

Sorry no - haven't got that far yet ... :(

But do have this which I was working towards :

Image


As for the Electrics - got them from a wreckers & think it was a '83 Touring wagon ... ;)

( scored an electronic dash also, but not sure it works yet - prefer analogue )

Cheers, Bantum ...

User avatar
zookcruzr
Junior Member
Posts: 55
Joined: Wed Apr 16, 2014 2:58 pm
Location: Port Stephens NSW

Post by zookcruzr » Wed Jun 11, 2014 4:29 pm

cheers Bantum
Never use big words where diminutive ones would suffice.

User avatar
henpecked
Junior Member
Posts: 443
Joined: Fri Dec 05, 2008 7:20 pm
Location: South Oz

Post by henpecked » Fri May 15, 2015 6:30 pm

any update Bantum ?

User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

Slow Progress ...

Post by Bantum » Fri May 15, 2015 8:42 pm

Sorry no - Stuff all has happened on this since moving to Brisbane & as with other things in life, I have put this project on hold indefinitely. Hope to get back to it one day ... :p

Ciao, Bantum ...

Post Reply

Return to “Bantum’s Works”