Page 1 of 1

Liberty Gen1 Ser2 Power Antenna

Posted: Sun Mar 02, 2008 6:22 pm
by maddog
Hi Guys,
Can anyone tell me which wire to hookup to for my power antenna? I have just fitted a new CD/MP3 Player and cannot figure out which wire in the Subaru harness is the feed to the antenna - I know it has one because the original tape player made it work!!!! I found a wiring diag for a Subaru but it shows red/white for power ant - but not in this car!
Thanks for any help! Justin.

Posted: Sun Mar 02, 2008 8:25 pm
by Suba
Pretty sure it is the yellow one or maybe the blue one .

Mike.

Posted: Mon Mar 03, 2008 12:53 pm
by Alex
im pretty sure its the blue one with a green stripe. Did this to my sisters car not long ago. You need to hook i up to the remote wire of the deck. (usually blue)

EDIT: see below pic. Definitely blue with green stripe. Pinout number 6

Image

alex

Posted: Wed Mar 05, 2008 6:09 pm
by maddog
Thanks Alex - diagram is handy! But..... in my Subie workshop manual it shows B as Black and G as Green... Blue is L on the wiring diagram... so I shall look for both ... I'll let you know! Thanks again.

Posted: Fri Mar 07, 2008 4:59 pm
by maddog
... It was Black with Green stripe!
Thanks for the help guys!

Posted: Fri Mar 07, 2008 5:58 pm
by Alex
oh yeh whoops. Cant believe i fell for that one...AGAIN! lol

alex