Page 1 of 1
How to change front speakers in a gen 1 lib
Posted: Fri May 02, 2008 6:49 pm
by ol kid
hey all, last night i tryed to change the front speakers in my bros lib and I came a cross trouble. do you need to pull the whole door panel off, or does it unclip?
Cheers Ethan
Posted: Fri May 02, 2008 6:50 pm
by vincentvega
whole door trim needs to come off. remove all the screws you can find, the surround around the door handle, and then the rest unclips.
Posted: Fri May 02, 2008 6:54 pm
by ol kid
yeh thanks mate. i didn't want to break anything being a new car and all. Cheers Ethan
Posted: Sun May 04, 2008 10:59 am
by Suba
A new 17 year old anyway:) .
Mike.
Posted: Sun May 04, 2008 5:47 pm
by Bumpty
just curious, how have you sat your new speakers in?
Posted: Sun May 04, 2008 8:13 pm
by Kappage
I am curious too im pretty new and i need to get some speakers for my 1993 Liberty im not sure if yours is a 1990 or 1991? If you do do it can u please post some pictures? Thanks
Posted: Mon May 05, 2008 8:21 am
by Suby Roo
Its a '92 lib. Havent got the new speakers in yet, Ethan (ol Kid) My brother pulled it apart and decided to put the speakers in the back as they were 6 and a half inch splits, Wouldnt fit in the front.
when i do get the front ones in ill take some pics and put them up.
Cheers
Posted: Mon May 05, 2008 2:55 pm
by ol kid
Yeh i did sit the speakers in and the magnet hit on the inside of the window. If you put the window up it would fit in but in turn your window wouldnt go right down. Cheers Ethan
Posted: Mon May 05, 2008 3:01 pm
by Alex
ol kid wrote:Yeh i did sit the speakers in and the magnet hit on the inside of the window. If you put the window up it would fit in but in turn your window wouldnt go right down. Cheers Ethan
get spacers. Nearly every car needs them.
I did my sister's gen1 a while ago and they needed about 2cm worth of spacing. But it depends on what speakers your running.
most importantly make sure you get an airtight fit inbetween the door and the speaker. You will loose alot of bass otherwise.
alex
Posted: Mon May 05, 2008 5:05 pm
by ol kid
Thanks mate. Do they need to be angled of just flat? Im not that worried bout losing bass cause it hits about 125 db from the sub. Cheers Ethan
Posted: Mon May 05, 2008 7:56 pm
by Alex
flat ones will get you out of trouble. You still want abit of midrange though. Its all about SQ, not pure ear-bleeding ground shaking bass!!(although im abit partial to this myself:))
cheers
alex
Posted: Tue May 06, 2008 2:31 pm
by ol kid
Yeh man thanks for your help. I will let you know how it works out.
Cheers Ethan