kevins build up

Detailed reference pages on Members special projects ...
User avatar
84superoo
Junior Member
Posts: 69
Joined: Mon Sep 17, 2012 2:04 pm
Location: bendigo victoria

Post by 84superoo » Thu Aug 15, 2013 9:25 am

El_Freddo wrote:Where's the like button?!

Looking great mate! I hope it's been turning heads!

Cheers

Bennie
when your limping along the road at half the speed you should be going and the front of your car hanging off and your bonnet tied down with rope, you do get heads turning!

User avatar
Silverbullet
Senior Member
Posts: 2870
Joined: Mon Aug 23, 2010 6:20 pm
Location: Adelaide

Post by Silverbullet » Thu Aug 15, 2013 6:02 pm

Aw, I hate seeing old Subies smashed up like that :( What a shame. Is there much major damage underneath? easily repairable with a new fender and a light?
Will it ever end!?
-EA81 TWIN CARB!!!!
-L series 5 speed
-Custom paint job
-2" lift
-Full custom re-wire
-L series front end
Image

User avatar
Smokey
Junior Member
Posts: 438
Joined: Thu Dec 15, 2005 10:00 am
Location: Sydney, NSW

Post by Smokey » Thu Aug 15, 2013 6:32 pm

Man u've done so much and the pain of the blue slips... Doesn't look good from what little I know of the MY.

Don't give up on Kevin. Just another bump on the road so to speak.

User avatar
Tigger
Junior Member
Posts: 414
Joined: Wed Dec 28, 2005 10:00 am
Location: West Brisbane

Post by Tigger » Thu Aug 15, 2013 7:09 pm

:( so sorry to see this but hopefully you are able to repair it so you can get back to cruising around again!
ImageImageImage
2012 Subaru Forester - 2.0D Premium ~ 2002 Subaru Forester - Limited (Lifted)

User avatar
84superoo
Junior Member
Posts: 69
Joined: Mon Sep 17, 2012 2:04 pm
Location: bendigo victoria

Post by 84superoo » Thu Aug 15, 2013 7:29 pm

The front sub frame where the bumper bolts on is crumpled, the guard is a write off ill also need all the lights for that side and the headlight bracket, the bonnet is repairable, but still unsure of the extent of the damage.

User avatar
pezimm
Junior Member
Posts: 463
Joined: Sun Jun 07, 2009 4:21 pm
Location: VIC

Post by pezimm » Thu Aug 15, 2013 7:39 pm

Not good! I feel for you, mate. I had someone run into the back of my Forester. Even though in my case the smash was not so bad and parts are generally easier to find, it hurts to see your pride and joy damaged...

I hope you're able to restore it to its glory!

Pedro.
Image

GONE :( - Forester XT Auto - MY07 with all the goodies
Now occasionally driving a Ford barge...

User avatar
84superoo
Junior Member
Posts: 69
Joined: Mon Sep 17, 2012 2:04 pm
Location: bendigo victoria

Post by 84superoo » Fri Aug 16, 2013 8:48 am

I gave Kevin a wash to get all the mud and bits of tree off.
Image
You can tell by the guard how much its been pushed in and down:( I've already fixed the bonnet a bit just by bending it so it should come up alright with a bit of work :rolleyes:
Image

User avatar
Subydoug
Junior Member
Posts: 988
Joined: Wed Feb 08, 2012 10:19 pm
Location: Carlisle WA

Post by Subydoug » Fri Aug 16, 2013 9:16 am

Ouch. That's nasty. Looks like you got away with no damage to the radiator?

I believe toonga has a nice triplet of headlights that would go nicely on the nose of your beast ;)

Regards

Doug

User avatar
84superoo
Junior Member
Posts: 69
Joined: Mon Sep 17, 2012 2:04 pm
Location: bendigo victoria

Post by 84superoo » Fri Aug 16, 2013 4:26 pm

Subydoug wrote:Ouch. That's nasty. Looks like you got away with no damage to the radiator?

I believe toonga has a nice triplet of headlights that would go nicely on the nose of your beast ;)

Regards

Doug
yeah luckily no damage to the rad, the thermo fans are about 7mm from the pulleys on the front of the engine so I only just got away with it. I'm only spending the minimum amount I have to so no new headlights for me!

User avatar
1983wagon
Junior Member
Posts: 147
Joined: Thu Jul 18, 2013 10:05 pm
Location: South Australia

Post by 1983wagon » Fri Aug 16, 2013 6:41 pm

ouch, never like seeing that. sorry if ive missed something but was there a reason you took the bull bar and rear bar off?? was there an issue with the roadworthy.... good luck with getting kevin back on the road.
[SIGPIC][/SIGPIC]

User avatar
84superoo
Junior Member
Posts: 69
Joined: Mon Sep 17, 2012 2:04 pm
Location: bendigo victoria

Post by 84superoo » Sat Aug 17, 2013 9:00 pm

1983wagon wrote:ouch, never like seeing that. sorry if ive missed something but was there a reason you took the bull bar and rear bar off?? was there an issue with the roadworthy.... good luck with getting kevin back on the road.
I took them off just because I wanted it looking a bit cleaner but I'm regretting it now :mad: they passed roadworthy no probs.

User avatar
1983wagon
Junior Member
Posts: 147
Joined: Thu Jul 18, 2013 10:05 pm
Location: South Australia

Post by 1983wagon » Sat Aug 17, 2013 11:46 pm

I actually loved the rear bar... I wouldn't be game enough doing it to mine but looked quite good with the tyre rack also :)
[SIGPIC][/SIGPIC]

User avatar
chinski
Junior Member
Posts: 61
Joined: Sun Aug 04, 2013 6:05 pm
Location: Gold Coast

Post by chinski » Sun Aug 18, 2013 6:18 pm

just read thread from start to finish, it was so full of up & downs ! after the cut & polish was amazing! brand new looking paint there with some loving ! car is looking awesome inside & out.

shame about that tree jumping out infront of Kevin, hope you get him fixed up OK.

Old subies dont die, they get named Kevin & brought back to new !!
1986 Brumby with MY00 WRX engine :mrgreen:

User avatar
84superoo
Junior Member
Posts: 69
Joined: Mon Sep 17, 2012 2:04 pm
Location: bendigo victoria

Post by 84superoo » Sun Aug 18, 2013 9:01 pm

chinski wrote:just read thread from start to finish, it was so full of up & downs ! after the cut & polish was amazing! brand new looking paint there with some loving ! car is looking awesome inside & out.

shame about that tree jumping out infront of Kevin, hope you get him fixed up OK.

Old subies dont die, they get named Kevin & brought back to new !!
Thanks for the kind words, yes there has been a lot of ups and downs and hopefully there will be more ups to come and far less downs.

User avatar
84superoo
Junior Member
Posts: 69
Joined: Mon Sep 17, 2012 2:04 pm
Location: bendigo victoria

Post by 84superoo » Tue Sep 03, 2013 7:56 am

well as it seems I change my mind a lot, seeing that the body isn't perfect anymore I've decided to go back to the 4wd option. so the bulbar is on and I cut the guards and used a BFH to make my 14x7" rims with 27" BFG AT fit. I still have to flare out the front guards because the tyres hit when it flexes.
Image
Image
Image
Image
Image

User avatar
El_Freddo
Master Member
Posts: 12506
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Fri Sep 13, 2013 8:18 pm

Looks awesome mate! Time for a lift I reckon :twisted:

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
84superoo
Junior Member
Posts: 69
Joined: Mon Sep 17, 2012 2:04 pm
Location: bendigo victoria

Post by 84superoo » Sat Sep 21, 2013 7:04 pm

El_Freddo wrote:Looks awesome mate! Time for a lift I reckon :twisted:

Cheers

Bennie
that's what I thought, so I went and got my self a 3" lift haha :D

User avatar
84superoo
Junior Member
Posts: 69
Joined: Mon Sep 17, 2012 2:04 pm
Location: bendigo victoria

Post by 84superoo » Sat Sep 21, 2013 7:08 pm

Alltighty then every one, would anyone like to buy Kevin? If interested just PM me an offer and ill get back to you as soon as possible. Will come with all parts that I have.
PS. The rear bar is now back on.

User avatar
NachaLuva
General Member
Posts: 1930
Joined: Wed Aug 31, 2011 5:05 pm
Location: SE Melbourne

Post by NachaLuva » Sat Sep 21, 2013 9:53 pm

What a shame you're selling him after all the hard work :(
[SIGPIC][/SIGPIC]
Owner SubieLiftOz, lift kits for Subarus :twisted:

'97 Forester: EJ22E; 4" Custom Body Lift; JDM STi plated LSD; 20mm WRX RSB; Snorkel; Kings

User avatar
84superoo
Junior Member
Posts: 69
Joined: Mon Sep 17, 2012 2:04 pm
Location: bendigo victoria

Post by 84superoo » Mon Sep 23, 2013 9:26 pm

NachaLuva wrote:What a shame you're selling him after all the hard work :(
yeah it'll be sad to see him go :(

Post Reply

Return to “Restorations and Project Build Ups.”