Posted: Wed Apr 27, 2016 7:17 am
********* L series arm, ej balljoint and hub, my tie rod ends and steering rack on the front. Factory my castor rods (cause I spaced back the crossmember 100mm)
Xt6 rear hubs from the U.S. Custom modified (extra holes and washers welded around new holes) ej rear backing plates for hand brake.
I originally used a Mitsubishi express van castor rods and xf falcon bushes before I moved back the crossmember but leading edge guard clearance and inner guard clearance was non existant. But that was with 215/45 17" wheels.
Xt6 rear hubs from the U.S. Custom modified (extra holes and washers welded around new holes) ej rear backing plates for hand brake.
I originally used a Mitsubishi express van castor rods and xf falcon bushes before I moved back the crossmember but leading edge guard clearance and inner guard clearance was non existant. But that was with 215/45 17" wheels.