Roof Console, Subie Boys , M.Y. wagon & Brumby
the boys say that once the new version of the console mould is finished[smooth finish] the price will be for the M.Y./brumby will be $110 plus postage. The L series will be $120 plus postage. that is for a blank console, no padding etc. We still have the original mould we started with so if anyone isn't too particular & doesn't mind a rougher console we can make them for $90 plus postage, these however are only for M.Y.'s & brumbies.
Lea
Subie Boys's
Roscoruby's
Better Half
[SIGPIC][/SIGPIC]
Subie Boys's
Roscoruby's
Better Half
[SIGPIC][/SIGPIC]
Hey Hazey,Hazey wrote:These Subie Boys consoles look fantastic! Have you got any shots of your latest Brumby version? I'd be very interested in one.
The only ones we make at the moment is still the same old ones. We have had to much on our plate to move forward.
rtcb65
------------------
Redneck Rick.
1997 Gen 3 outback. GT forester wheels . Hopefully more changes to come. Proud Supporter And User of -----------C R O S S B R E D --- P E R F O R M A N C E ---- Products
[SIGPIC][/SIGPIC]
------------------
Redneck Rick.
1997 Gen 3 outback. GT forester wheels . Hopefully more changes to come. Proud Supporter And User of -----------C R O S S B R E D --- P E R F O R M A N C E ---- Products
[SIGPIC][/SIGPIC]
- TheInterceptor
- Junior Member
- Posts: 137
- Joined: Sat Sep 25, 2010 9:57 pm
- Location: Dunsborough WA
Gday mate.TheInterceptor wrote:Gday.
Would you guys be making any more M.Y consoles? Im v keen for one! (the rough one since it'll be covered up)
Cheers.
What are you after, wagon, brumby one. If after a wagon one, i have one here already covered . Which now depends if you wont it set up the same as we have or set up differently. If it same as we have . The console in the pics on page 2 is available , minus the bolt ins of course .
Rick
rtcb65
------------------
Redneck Rick.
1997 Gen 3 outback. GT forester wheels . Hopefully more changes to come. Proud Supporter And User of -----------C R O S S B R E D --- P E R F O R M A N C E ---- Products
[SIGPIC][/SIGPIC]
------------------
Redneck Rick.
1997 Gen 3 outback. GT forester wheels . Hopefully more changes to come. Proud Supporter And User of -----------C R O S S B R E D --- P E R F O R M A N C E ---- Products
[SIGPIC][/SIGPIC]
- TheInterceptor
- Junior Member
- Posts: 137
- Joined: Sat Sep 25, 2010 9:57 pm
- Location: Dunsborough WA
Sorry Mate. Page 3. Covered in vinyl .TheInterceptor wrote:Is it just me or isnt there any pics on page 2? And yup its for an MY wagon.
Ok so, which one is it?
What is it covered in and what colour?
Cheers mate
rtcb65
------------------
Redneck Rick.
1997 Gen 3 outback. GT forester wheels . Hopefully more changes to come. Proud Supporter And User of -----------C R O S S B R E D --- P E R F O R M A N C E ---- Products
[SIGPIC][/SIGPIC]
------------------
Redneck Rick.
1997 Gen 3 outback. GT forester wheels . Hopefully more changes to come. Proud Supporter And User of -----------C R O S S B R E D --- P E R F O R M A N C E ---- Products
[SIGPIC][/SIGPIC]
- TheInterceptor
- Junior Member
- Posts: 137
- Joined: Sat Sep 25, 2010 9:57 pm
- Location: Dunsborough WA
All rough consoles are $100 posted . We sell them blank, that way the buyer can set them up the way they wont. To sell the sunglass holder console fully fitted out would cost $800.TheInterceptor wrote:No worries, so the one with the sunglasses holder. How much posted to 2217?
rtcb65
------------------
Redneck Rick.
1997 Gen 3 outback. GT forester wheels . Hopefully more changes to come. Proud Supporter And User of -----------C R O S S B R E D --- P E R F O R M A N C E ---- Products
[SIGPIC][/SIGPIC]
------------------
Redneck Rick.
1997 Gen 3 outback. GT forester wheels . Hopefully more changes to come. Proud Supporter And User of -----------C R O S S B R E D --- P E R F O R M A N C E ---- Products
[SIGPIC][/SIGPIC]
- TheInterceptor
- Junior Member
- Posts: 137
- Joined: Sat Sep 25, 2010 9:57 pm
- Location: Dunsborough WA
Yer, If ya think about it . It is around $400 to $500 for the uhf that we use.A round $100 for the new sun glass holder posted, Then the price of the console and then the coverings . Also the wiring , plugs and solder . Last but not least, a few bucks for us. At the moment with the consoles, we make $5.00 each on them.TheInterceptor wrote:Whoa $800....ill be right
I'll take the $100 one mate.
Now , which one would you like , the one on the 3rd page , which is already covered, or a blank on.
rtcb65
------------------
Redneck Rick.
1997 Gen 3 outback. GT forester wheels . Hopefully more changes to come. Proud Supporter And User of -----------C R O S S B R E D --- P E R F O R M A N C E ---- Products
[SIGPIC][/SIGPIC]
------------------
Redneck Rick.
1997 Gen 3 outback. GT forester wheels . Hopefully more changes to come. Proud Supporter And User of -----------C R O S S B R E D --- P E R F O R M A N C E ---- Products
[SIGPIC][/SIGPIC]
- TheInterceptor
- Junior Member
- Posts: 137
- Joined: Sat Sep 25, 2010 9:57 pm
- Location: Dunsborough WA
Yeah makes sense.rtcb65 wrote:Yer, If ya think about it . It is around $400 to $500 for the uhf that we use.A round $100 for the new sun glass holder posted, Then the price of the console and then the coverings . Also the wiring , plugs and solder . Last but not least, a few bucks for us. At the moment with the consoles, we make $5.00 each on them.
Now , which one would you like , the one on the 3rd page , which is already covered, or a blank on.
Sorry but one without the sunglasses provision would be alot better, if its not to much trouble id like one like the black vinyl one on page 1.
Cheers
83 Touring wagon
92 GL
02 OB
92 GL
02 OB
Check the classified section . I just listed the one that is covered. Listing removed.
rtcb65
------------------
Redneck Rick.
1997 Gen 3 outback. GT forester wheels . Hopefully more changes to come. Proud Supporter And User of -----------C R O S S B R E D --- P E R F O R M A N C E ---- Products
[SIGPIC][/SIGPIC]
------------------
Redneck Rick.
1997 Gen 3 outback. GT forester wheels . Hopefully more changes to come. Proud Supporter And User of -----------C R O S S B R E D --- P E R F O R M A N C E ---- Products
[SIGPIC][/SIGPIC]
- TheInterceptor
- Junior Member
- Posts: 137
- Joined: Sat Sep 25, 2010 9:57 pm
- Location: Dunsborough WA