Page 6 of 7
Posted: Fri Mar 11, 2011 9:54 am
by rtcb65
TheInterceptor wrote:Gday.
Would you guys be making any more M.Y consoles? Im v keen for one! (the rough one since it'll be covered up)
Cheers.
Gday mate.
What are you after, wagon, brumby one. If after a wagon one, i have one here already covered . Which now depends if you wont it set up the same as we have or set up differently. If it same as we have . The console in the pics on page 2 is available , minus the bolt ins of course .
Rick
Posted: Fri Mar 11, 2011 6:58 pm
by TheInterceptor
Is it just me or isnt there any pics on page 2? And yup its for an MY wagon.
Ok so, which one is it?
rtcb65 wrote:
This one?
Or this one?
What is it covered in and what colour?
Cheers mate
Posted: Fri Mar 11, 2011 7:26 pm
by rtcb65
TheInterceptor wrote:Is it just me or isnt there any pics on page 2? And yup its for an MY wagon.
Ok so, which one is it?
What is it covered in and what colour?
Cheers mate
Sorry Mate. Page 3. Covered in vinyl .
Posted: Fri Mar 11, 2011 8:52 pm
by TheInterceptor
No worries, so the one with the sunglasses holder. How much posted to 2217?
Posted: Sat Mar 12, 2011 8:18 am
by rtcb65
TheInterceptor wrote:No worries, so the one with the sunglasses holder. How much posted to 2217?
All rough consoles are $100 posted . We sell them blank, that way the buyer can set them up the way they wont. To sell the sunglass holder console fully fitted out would cost $800.
Posted: Sat Mar 12, 2011 4:11 pm
by TheInterceptor
Whoa $800....ill be right
I'll take the $100 one mate.
Posted: Sat Mar 12, 2011 6:28 pm
by rtcb65
TheInterceptor wrote:Whoa $800....ill be right
I'll take the $100 one mate.
Yer, If ya think about it . It is around $400 to $500 for the uhf that we use.A round $100 for the new sun glass holder posted, Then the price of the console and then the coverings . Also the wiring , plugs and solder . Last but not least, a few bucks for us. At the moment with the consoles, we make $5.00 each on them.
Now , which one would you like , the one on the 3rd page , which is already covered, or a blank on.
Posted: Sat Mar 12, 2011 6:46 pm
by skrewd
what about the price for an L series thats been covered in vinyl.??
Posted: Sat Mar 12, 2011 6:59 pm
by TOONGA
skrewd wrote:what about the price for an L series thats been covered in vinyl.??
I would say you would be looking at the same price regardless of what it was finished in.
TOONGA
Posted: Sat Mar 12, 2011 7:12 pm
by skrewd
was meaning just padding and vinyl, no lights or uhf
Posted: Sat Mar 12, 2011 7:21 pm
by TheInterceptor
rtcb65 wrote:Yer, If ya think about it . It is around $400 to $500 for the uhf that we use.A round $100 for the new sun glass holder posted, Then the price of the console and then the coverings . Also the wiring , plugs and solder . Last but not least, a few bucks for us. At the moment with the consoles, we make $5.00 each on them.
Now , which one would you like , the one on the 3rd page , which is already covered, or a blank on.
Yeah makes sense.
Sorry but one without the sunglasses provision would be alot better, if its not to much trouble id like one like the black vinyl one on page 1.
Cheers
Posted: Sun Mar 13, 2011 3:22 am
by Wagonman
Im interested in a Blank L series Wagon one.. Are they ready to go now?
Posted: Sun Mar 13, 2011 8:35 am
by rtcb65
Check the classified section . I just listed the one that is covered. Listing removed.
Posted: Sun Mar 13, 2011 9:30 am
by TheInterceptor
PM sent
Posted: Wed Jul 04, 2012 9:13 pm
by Jimmy_94
Im interested in one but how much would an l series one covered in blue vinyl without the sunglasses provision be?
Posted: Thu Aug 09, 2012 4:25 pm
by Bantum
Hi - I've also been considering what to do with the 'unatractive' area around the mirror, so when I saw this I thought "I'm interested in one too", but now wondering if they would fit a Brumby with a 'targa' roof ? - It looks a bit too wide & I'm not sure if it would fit between the openings. ( but I'm sure you could mod one it suit.) Any pointers ?
Posted: Fri Aug 10, 2012 11:56 am
by rtcb65
Bantum wrote:Hi - I've also been considering what to do with the 'unatractive' area around the mirror, so when I saw this I thought "I'm interested in one too", but now wondering if they would fit a Brumby with a 'targa' roof ? - It looks a bit too wide & I'm not sure if it would fit between the openings. ( but I'm sure you could mod one it suit.) Any pointers ?
Sorry Mate. These consoles wont fit a targa top brumby.
Posted: Wed Oct 31, 2012 9:54 pm
by Brumby Kid
Hey Rick,
I'm after one for my Brumby.
Just a few questions first.
Price and postage to 5052?
Can you cover them in vynal?
Do I have to cut the holes out for my accessories or are they there?
And if so how hard is this?
Cheers Cam
Posted: Thu Nov 01, 2012 1:17 pm
by rtcb65
Brumby Kid wrote:Hey Rick,
I'm after one for my Brumby.
Just a few questions first.
Price and postage to 5052?
Can you cover them in vynal?
Do I have to cut the holes out for my accessories or are they there?
And if so how hard is this?
Cheers Cam
Hey Cam,
Price $100 posted.
Sell them blank as i dont know what color or type of covering you wont and as for cutting out, i cant as i dont know what you are putting in it or where you are putting things,
Rick
Posted: Thu Oct 08, 2015 8:02 pm
by Silverbullet
Digging up an old thread
Just thought I'd better show that a Subie boys original creation was still waiting to be used. I've had this one sitting on the shelf bare and empty for over 3 years, got it second hand and un-used from another SA member on here.
I may be a few years late for showing off the console but oh well
