been a member for a while but havent really contributed much, learning a lot on the fly, love subarus and am tackling an ej conversion myself at the moment but i've come to a bit of a halt with the front CVs. i bought the crossbred brake kit from jeff earlier in the year, installed it no worries apart from the front CVs. the running gear in the MY is from a 92 liberty and im running both the engine and gearbox. in relation to my CV problem, i was under the impression that given that the front steering knuckles were from the liberty and that i'm running the liberty box the liberty CVs would fit ok, but as it turns out they're too long. i spoke to bloke who does CV joints locally and he suggested keeping the liberty inner and outer CVs and changing over the shaft to the one from the MY. but after pulling the MY CVs apart he said he discovered that the MY had 22 splines and the EJ one had 23. my understanding is that the 22 and 23 refers to the outer parts of the CVs and not the splines on the actual shaft. Is that correct? he should just be able to take the inner and outer CVs of the the liberty assembly and put them on the MY shaft, what has everyone else thats kept the ej box and installed jeffs kit done?
i'd really appreciate any assistance
![:confused:](http://cdn.jsdelivr.net/emojione/assets/3.1/png/64/1f615.png)