Page 1 of 1
Posted: Sat Mar 29, 2014 9:51 pm
by TOONGA
Yes they do impressive work
there is this way as well
showpost.php?p=200727&postcount=3
You just need an wrecked L series
TOONGA
Posted: Sun Mar 30, 2014 8:39 pm
by chinski
That look easier ! still i only have a stick welder so would have to pay someone else to do it, could maybe bolt in something similar.
would need to get it all pretty straight first go though !!
Posted: Fri May 09, 2014 2:34 pm
by tony90
Have you checked the front and rear diff are the same ratios?
I got a flat tyre on my Brumby with a WRX 4.44 diff and 14 sunraysias and fitted a std 13 wheel on the rear and the vibration was that bad from the viscous centre. Tailshaft was rattling that bad I thought it was going to fall off. I was running it RWD only.
The centre diff in a manual gearbox is also a viscous type which I assume will do the same thing