Page 1 of 1
MY / Brumby Radiator Question
Posted: Sun Jun 21, 2015 10:42 am
by preno
Will a brumby radiator in good condition be suitable for a N/A ej25 for cooling?
Radiator looks to be in good condition.
Cheers,
Matt
Posted: Sun Jun 21, 2015 10:48 pm
by Proton mouse
Yep wont be a drama. I know of 2 EJ turbo powered Brumbys that had the standard radiator in them, with no cooling difficulty.
The Brumby I am building now is N/A EJ powered and I have put in the standard Radiator.
I just had the inlet and outlets changed to 36mm and had them pointed in the direction of the engine inlet/outlets.
Cheers,
John
Posted: Sun Jun 21, 2015 11:21 pm
by TOONGA
Yes I have a standard brumby radiator with EJ size and oriented outlets in my EJ22 brumby. In winter I unplug the constant thermo fan as the radiator is very efficient. I have a switched thermo for backup in case I actually sit in traffic.
TOONGA
Posted: Mon Jun 22, 2015 8:33 am
by preno
Thanks guys. Standard radiator it is.
Cheers,
Matt
Posted: Thu Jul 09, 2015 7:09 pm
by henpecked
one of these would not go astray, they are relatively easy to modify for the EJ hoses if you want to do that.
http://www.ebay.com.au/itm/TOP-BRAND-36 ... 33a5954d43
they are all made in the same chinese factory , but the 3 I have used from various ebay sellers have all been good quality
Posted: Fri Jul 10, 2015 8:48 am
by steptoe
i was looking at a 98 rav4 last night and wondered if its rad would fit our old EA subies.
Looked about right. anyone ever considered one for a measure up ?