Silver Anniversary Liberty

YouTube · Post by **El_Freddo** » Tue Mar 19, 2013 5:32 pm

RSR 555 wrote:Oh great.. here we go.. thanks a lot Bennie.. this is all we need

Well, you can say "work it out yourself" or simply "no" - as they say, if you don't want to and are feeling pressured always say no

I'm thinking Guyph has a money pit he's not telling us about!!

Cheers

Bennie

guyph_01 · Post by **guyph_01** » Tue Mar 19, 2013 9:10 pm

So far the Outback shocks,the rear lower arms and the front 2pot brakes are on the car. While the brakes where out i had them machined and had a fresh set of pads fitted too:)

The leather interior from the outback was cleaned, and is gone in the Liberty with leather care products etc to try and revive them. Turned out quite well. Also added the leather arm rest and basically all the better bits from the outback. The carpet was cleaned as best as possible and i've gone over all the trim.

Still have to remove the old tint, struggling with that as the previous idiot riped the tint out without heating the glue so now the glass has glue all over it!!!

Also, i laid some wires to be able to, 1 disconnect ABS while 4wdiving and 2 turn 2wd and 4wd by the flick of a switch, well switches:p

I still don't have an engine, Its proving hard to find a good EJ22 for cheap..., but i'm still looking:)

RSR 555 · Post by **RSR 555** » Wed Mar 20, 2013 11:02 am

El_Freddo wrote:Well, you can say "work it out yourself" or simply "no" - as they say, if you don't want to and are feeling pressured always say no

Thanks for the tip.. did you read this Guyph?

El_Freddo wrote:I'm thinking Guyph has a money pit he's not telling us about!!

KPM Industries is a booming business.. must be careful not to get caught

guyph_01 · Post by **guyph_01** » Thu Mar 21, 2013 2:45 pm

Ok the car is a rolling shell again:)

Now i need to find an engine and finish the lift kit:)

RSR 555 · Post by **RSR 555** » Thu Mar 21, 2013 3:27 pm

EJ25 quadcam? or staying EJ22 this time

Are you going to make a front bar for this? so you can make one for me too

guyph_01 · Post by **guyph_01** » Thu Mar 21, 2013 5:21 pm

RSR 555 wrote:EJ25 quadcam? or staying EJ22 this time

Staying EJ22, Much easier and i won't have to ask you for help since its not a conversion as it looks like you don't want to help me anymore!!:evil:

RSR 555 wrote:Are you going to make a front bar for this? so you can make one for me too

That all depends if you start behaving and be nice in your comments here:p

RSR 555 · Post by **RSR 555** » Fri Mar 22, 2013 3:53 am

guyph_01 wrote:Staying EJ22, Much easier and i won't have to ask you for help since its not a conversion as it looks like you don't want to help me anymore!!:evil:

Really.. is this true? Does this mean I can get some of my own projects done??

guyph_01 wrote:That all depends if you start behaving and be nice in your comments here:p

Guess I'll be making my own then

Subydoug · Post by **Subydoug** » Fri Mar 22, 2013 9:03 am

Looks good Guy, though the rims are pretty filthy. Hope you find a suitable engine soon AAaaaaahhhhhchhhooooooSTIooooo

Regards

Doug

guyph_01 · Post by **guyph_01** » Fri Mar 22, 2013 2:52 pm

Subydoug wrote:Looks good Guy, though the rims are pretty filthy. Hope you find a suitable engine soon AAaaaaahhhhhchhhooooooSTIooooo

Regards

Doug

Yeah those are temporary rims, just so i can roll the car around:)

Hey Paul, guess what i'm working on now????

RSR 555 · Post by **RSR 555** » Fri Mar 22, 2013 4:21 pm

guyph_01 wrote:Hey Paul, guess what i'm working on now????

My new bumper replacement bullbar.. can't wait

Will it be ready by the time I get home?

guyph_01 · Post by **guyph_01** » Fri Mar 22, 2013 5:13 pm

RSR 555 wrote:My new bumper replacement bullbar.. can't wait
Will it be ready by the time I get home?

Lol u'll be SOOOOO jealous.... Might take it out if i sell the car, Then You and JPM can have a bidding war for it lol....

RSR 555 · Post by **RSR 555** » Fri Mar 22, 2013 6:58 pm

guyph_01 wrote:Lol u'll be SOOOOO jealous.... Might take it out if i sell the car, Then You and JPM can have a bidding war for it lol....

Why when I can just make one for me and Jayd.. then you can rip some other poor fella off

JPM · Post by **JPM** » Fri Mar 22, 2013 7:09 pm

I think you two need to work together on this project and put the whole KRudd/ JGillard thing to bed. It's a bit too Tony Grieg and Bill Lowry, the whole simmering passive aggression where there used to be nothing but pure man love.

I mean after all, with your combined skills I'm positive the end result will be a front bar of immense quality and strength, one that will suit the front end of my car, I mean our cars beautifully.

Guy- did you get my SMS photos?

Jayd- bringing back the love...

Wagonman · Post by **Wagonman** » Fri Mar 22, 2013 9:52 pm

+1 for a manhug between Guy and Paul. So much tension lol. But Paul if its not Guy taking up all your time it will be me

haha.

Look forward to seeing this silver lib out on the beach though with Guy and friends hangin out of both sunroofs!

guyph_01 · Post by **guyph_01** » Sat Mar 23, 2013 12:03 am

Ok Work on the car might be delayed a few days...

Pics speak more than words....

The culpable....., The grinder..., Ohhhh and wearing thongs!!!!!

Subydoug · Post by **Subydoug** » Sat Mar 23, 2013 12:33 am

Ouch mate, betya that stung a wee bit. Just go do some fishing for the next few days. The salt water will have it looking good. Its my remedy for my munted toe

.

Doug

WeeGee · Post by **WeeGee** » Sat Mar 23, 2013 12:46 am

pssht, just a flesh wound! Claim some sick days to get more time to work on the wagon. But really, I hope you're doing well...

Post by **TOONGA** » Sat Mar 23, 2013 8:45 am

http://www.youtube.com/watch?v=zKhEw7nD9C4

just a flesh wound

TOONGA

JPM · Post by **JPM** » Sat Mar 23, 2013 11:20 am

Guy-

Two things, next time at the hospital DON'T let your brother/ cousin do the surgery on your foot! Seriously the photo with the nurse made me do a double take!

Secondly, pain is fleeting, glory lasts forever- and chicks dig scars!!!

You're not the first person on this forum to angle grind in Chinese safety boots, and I don't reckon you'll be the last.

Get well
Jayd

YouTube · Post by **El_Freddo** » Sat Mar 23, 2013 11:58 am

JPM wrote:I think you two need to work together on this project and put the whole KRudd/ JGillard thing to bed. It's a bit too Tony Grieg and Bill Lowry, the whole simmering passive aggression where there used to be nothing but pure man love.

This is true, but the "new" dynamics of a long distance relationship are taking its toll on both parties.

Other than the Queensland safety boot incident everything's looking pretty good mate!

Cheers

Bennie