Boat Project

User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

Post by guyph_01 » Sun Jan 15, 2012 12:48 am

El_Freddo wrote:That sleazy guy should bring the cost down a few grand :p

So what ideas did you get Guy?

Cheers

Bennie
Nothing much that that i already was planning to do but from the selection of other pics i was able to see the way the cables were laid and a few ideas for the console:)

Hoping to get it ready for the the end of summer:)
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com

User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

Post by guyph_01 » Sun Jan 15, 2012 10:00 am

Got some more work done and pretty much cut all the plates, sanded the area where they are going to be welded and bolted as much as i can to the boat.
Now i just need to get the boat to the welded and he will weld it all up for me.
Still got some rough edges and gaps that need to be looked at before welding but this is what it should look like...,

Image

Image

Image

Also Picked up a box trailer frame trailer for $30. I'll just weld on a few rollers, side guides and a winch and that should be it.
Already had new bearings but it needs new tires and a set of lights:)

Image
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com

User avatar
El_Freddo
Master Member
Posts: 12487
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Sun Jan 15, 2012 10:37 pm

Hehehe at the Trailer! Should do the job once you're done with it!

And that ally plate looks good. Should do the job well. Now the question is, what's the most powerful outboard you can put on it without it breaking?? :twisted:

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

Post by guyph_01 » Thu Jan 19, 2012 9:54 pm

Hey guys,

Little update. Big thx to Mcgyver for giving me back most of the trailer parts that was on the original trailer that he didn't use when he converted the trailer to suit two jetski's.

This saved me having to buy the winch, jockey wheel, rollers and the slides.
I needed to extend the front of the trailer so i went to a metal shop and got them to make me a break back trailer pivot that i welded to the front. It should help when loading and unloading the boat. That said it quite a light boat!

Also, As i still don't have a gas bottle and not sure of the condition of the mig welder i stuck with what i knew, the stick. I talked to a friendly exhaust shop owner that offered to test the mig welder for me. All i have to do is bring it to him. I need to wait for my bro to get back so i can put it in the Red brumby to transport it. I'm not allowed to use/borrow the brumby (or the RS) as the last time i did, i can back with a Yellow defected sticker... Ouuupps, LOL.

Anyway this is what ive done so far:

Image
Image
Image
Image
Image

Also don't worry, there was no grinding happening near the RS, I need to be crazy to do something like that. My bro would kill me!!!!!

I still have to add one last roller, bolt on the jockey wheel, bolt/weld on mud guards, Wire up the lights, get some new tyres and bolt on the tow hitch on the trailer arm. Then its to the boat builder to weld up the rear Alu plates:)
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com

User avatar
El_Freddo
Master Member
Posts: 12487
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Thu Jan 19, 2012 10:12 pm

Awesome stuff Guyph! Gotta be happy with that!!

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

Post by guyph_01 » Thu Jan 19, 2012 10:16 pm

Hehe, yep its getting there. After that the next step will be to do the elc and engine side:)

I've got a question, On this boat i'm building i have put the control on the left side as i think its easier to steer with the right hand. Why do all, well most boats have it on the right? Ok for boats with the steering on the right side of the hull its easier to put it on the side of the hull thus the right hand side, but why do even the center console boat have it on the right like that other explorer boat above? Does anyone know if there is a good reason???
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com

User avatar
El_Freddo
Master Member
Posts: 12487
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Fri Jan 20, 2012 1:28 pm

guyph_01 wrote:Hehe, yep its getting there. After that the next step will be to do the elc and engine side:)

I've got a question, On this boat i'm building i have put the control on the left side as i think its easier to steer with the right hand. Why do all, well most boats have it on the right? Ok for boats with the steering on the right side of the hull its easier to put it on the side of the hull thus the right hand side, but why do even the center console boat have it on the right like that other explorer boat above? Does anyone know if there is a good reason???
Probably something to do with most boats being left hand drive, put the throttle control closest to other passengers incase something goes wrong, or to have the right hand have something to rest on. Dunno really, probably due to the company being American or their main target group are Left Hand Drivers so the right hand get the throttle.

I don't see it being a problem swapping it over, so long as there's no sharp edges for you or your passengers to cut themselves on if they hit it for some reason you should be fine.

Another reason I've just thought about is that the accelerator pedal is the right pedal...

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

Post by guyph_01 » Mon Jan 23, 2012 11:53 pm

Finished off the trailer 2day. Now i need to add the rear lights and reflectors:)

Image

Hopefully this weekend i can go to get the rear transom welded up..
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com

User avatar
El_Freddo
Master Member
Posts: 12487
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Sat Jan 28, 2012 10:33 am

guyph_01 wrote:Finished off the trailer 2day. Now i need to add the rear lights and reflectors:)

Image
That's pretty schmick mate! Top effort!

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

Post by guyph_01 » Sat Jan 28, 2012 11:24 am

Thx, Going to the boat builder to get the rear transom welded 2day:)
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com

User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

Post by guyph_01 » Wed Feb 08, 2012 9:42 am

Got some more work done:) Got the seats re-trimmed, Got the transom powder coated and bolted, bolted the engine, Ran all the wires etc. Only thing i'm not sure on how to connect the elec wires:(

A few pics:)

Me adding the nuts inside the hull:p
Image

She not 100% finished but you should get an idea, Oh and i've added a ski pole:p
Image

Image
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com

User avatar
Richie-Rich
Junior Member
Posts: 69
Joined: Mon Apr 27, 2009 10:15 pm
Location: Perth

Post by Richie-Rich » Wed Feb 08, 2012 10:56 am

Impressive.

You got some skills bro.

User avatar
RSR 555
Elder Member
Posts: 6951
Joined: Sat Nov 10, 2007 10:42 am
Location: ATM... stuck in Rockingham

Post by RSR 555 » Wed Feb 08, 2012 12:29 pm

guyph_01 wrote:Me adding the nuts inside the hull:p
Image
Yeah.. we see the nuts you have :???: not the most flattering picture.. lol

Can't wait to try this thing out :mrgreen:
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.

RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]

Disclaimer: Not my website but hyperlink here to Subaru workshop manuals

User avatar
El_Freddo
Master Member
Posts: 12487
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Wed Feb 08, 2012 12:45 pm

I love the fact that you see potential in things others miss all the time - and that you barter on your sales - mum's good at that too and has always encouraged us to do the same. Some times it works, some times it doesn't.

Keep up the good work!

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

Post by guyph_01 » Wed Feb 08, 2012 1:27 pm

Thx for the comment Bennie, I've picked that up from my dad, and for me its just for having fun mostly, I love working with my hands, ohhh and the occasional $$ when i get board of it or get my hands on the next project:)

Yes Paul, we all know your jealous..., and not of the boat....
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com

User avatar
RSR 555
Elder Member
Posts: 6951
Joined: Sat Nov 10, 2007 10:42 am
Location: ATM... stuck in Rockingham

Post by RSR 555 » Wed Feb 08, 2012 1:57 pm

guyph_01 wrote:Yes Paul, we all know your jealous..., and not of the boat....
Keep dreaming.. we know about you frogs :mrgreen:
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.

RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]

Disclaimer: Not my website but hyperlink here to Subaru workshop manuals

User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

Post by guyph_01 » Sun Feb 12, 2012 6:33 pm

Just a bit more done 2day, Not much has happened, mostly cosmetic, but the things i'm trying to figure out at the moment is a water seal for the holes i've made to pass the engine cables etc. It doesn't have to be water tight but just splash proof or water tight would be a bonus. Don't really want to block it up with silicone or similar as when the engine turns or tilts cables move with it and the silicone will not last long.

Image

Image

Any ideas?

Also painted the top and side vents to match the blue seats. hopefully it will last. Not sure if i want to paint the fuel cap yet as that gonna get a lot of hand action and end up make it look worst if i paint it. Maybe get a black cap somewhere???

Image

The spot i choose for the speakers..

Image

Also this is what the dash/ control looks like. just need to buy some label switch stickers for the Nav light, Air pump, Bilge pump, Acc etc.

Image

And this is inside the hull. Planning to add a alu frame over the bilge pump so i can add a second spare tank:)

Image

Ohhh and dont worry i'll clean up the wires once everything is hooked up and working properly.
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com

User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

Post by guyph_01 » Fri Mar 02, 2012 9:49 pm

TADAAAAAA,

A big thx to all the guys who helped me create and complete this project with all the advice, And to those who doubted me, well, I YOUR FACE!!!!:p haha

I really happy and proud of myself for building it and how it turned out. Well its not been water tested yet but it should be ok if the honda engine one is. Only issue is my main switch isolator ****ed up so i had to connect everything directly. I'll need to find a better one than the $15 ebay one.

Image

Image

Image

Image

Yes this thing was really miss treated and had quite a few leaks. And i need a steering adjustment:) I wish i can find a cheapish better tube some day, I'll keep and eye out, Or if you guys come across one plz let me know.
That shot looking circle and wires is were the old nav light use to be, will try and cover it up somehow.
Ohh and at the top of the ski pole i plan to add a stern Light to cover the hole but also its a good place for it:)
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com

User avatar
d_generate
General Member
Posts: 1529
Joined: Sat Feb 16, 2008 1:51 am
Location: Back in Perth and SORing it atm.

Post by d_generate » Sat Mar 03, 2012 1:50 am

Absolutely brilliant, well done mate and it should go like a little rocket.
98 Libbo with V3 STI running gear. 13.0 @ 105mph with CAI & 3" Zorst:mrgreen:
http://www.youtube.com/watch?v=TKrsF-2JS3M :twisted:
Image

User avatar
RSR 555
Elder Member
Posts: 6951
Joined: Sat Nov 10, 2007 10:42 am
Location: ATM... stuck in Rockingham

Post by RSR 555 » Sat Mar 03, 2012 4:05 am

guyph_01 wrote:And to those who doubted me, well, I YOUR FACE!!!!:p haha
I YOUR FACE !! that is soo scary.. I don't want you to be my face :(
guyph_01 wrote:I really happy and proud of myself for building it and how it turned out. Well its not been water tested yet but it should be ok if the honda engine one is. Only issue is my main switch isolator ****ed up so i had to connect everything directly. I'll need to find a better one than the $15 ebay one.
Well done Guyph.. Love to see it go in the water :cool:
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.

RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]

Disclaimer: Not my website but hyperlink here to Subaru workshop manuals

Post Reply

Return to “Guyph”