Page 2 of 5
Posted: Mon Jan 09, 2012 1:47 pm
by TOONGA
dang will try the other one, if I can find it again
found it only 13 hours to go
TOONGA
Posted: Mon Jan 09, 2012 2:37 pm
by D3V1L
guyph_01 wrote:Its not really for fishing, Mainly for some water sports on the river. Fishing in WA is useless!!! fish are ridiculously small.
then you need to go fishing in the right spots........
wa has some of the best fishing in australia
i know ive caught plenty of fish i wouldnt call.,.....small
Posted: Mon Jan 09, 2012 3:53 pm
by Alex
yes, caught in the metro area, so tiny......
Posted: Mon Jan 09, 2012 4:14 pm
by TOONGA
Nice fish Mullaway or mackerel?
Guy this is the only other manual I could find, this one is 170 meg or so and according to the index has the 402 motor in it.
https://www.rapidshare.com/files/217679 ... -40_HP.pdf
hope it is the one because there are no others available (that I can find)
TOONGA
Posted: Mon Jan 09, 2012 5:00 pm
by Alex
aussie salmon
Posted: Mon Jan 09, 2012 5:11 pm
by RSR 555
Alex wrote:
TOONGA wrote:Nice fish Mullaway or mackerel?
The only thing that looks like a mackie is Alex's head
see.. the teeth
:D:D
Posted: Mon Jan 09, 2012 5:11 pm
by TOONGA
mmmmmm salmon very nice eating especially for a "small" fish
TOONGA
Posted: Mon Jan 09, 2012 5:48 pm
by guyph_01
Sry guys, i meant around Perth area.
How many times did you catch something this big Alex in the metro area?
I know up north has great fishing:)
Posted: Mon Jan 09, 2012 9:59 pm
by D3V1L
just off the coast has endless supply mate.
cockburn sound has some serious sized pinkies last time i went out
davo
Posted: Mon Jan 09, 2012 11:00 pm
by Alex
guyph_01 wrote:Sry guys, i meant around Perth area.
How many times did you catch something this big Alex in the metro area?
I know up north has great fishing:)
Effort = reward. It's not that hard. Check out fishwrecked forums before making amateurish comments! Hahaha
Sent from my HTC Desire using Tapatalk
Posted: Tue Jan 10, 2012 5:15 pm
by RSR 555
What?? no bite Alex.. must change my bait
Posted: Tue Jan 10, 2012 6:10 pm
by El_Freddo
RSR 555 wrote:What?? no bite Alex.. must change my bait
He's mellowed now that he's a father... maybe.
Cheers
Bennie
Posted: Thu Jan 12, 2012 12:53 am
by guyph_01
Not much happened, Had to replace a water pump on a mates car. Did cut part of the fiberglass transom in preparation for the new Alu transom. The boat builder guy i got the engine from thats gonna help me weld it up said that the water line should be at the yellow line.
Here is what i did last minute before sunset 2day, F*&K got fiberglass powder everywhere, Good thing i had a cloth suit thing ski mask and breather mask:)
The progress so far....
I'll hopefully get a lot more done tomorrow, need to buy some grinding disks, stainless bolts,nuts washers etc. I also need to cut and bolt as much as i can to the boat, Then one weekend i'll bring it all to his place so everything can be welded up:)
Apart from the transom i need/want to organise some stuff
-Try and get the seadoo fuel, rev and speed gauges to work
-Add a second spare tank in the hull and secure it
-Find a spot and add a battery
-Install a bilge pump
-Also thinking of adding a little 12v air comp that can be useful to pump up the tube if needed.
-Figure out how to re-wire the safety kill switch (Very very important)
-Maybe add a radio and speakers:)
Posted: Thu Jan 12, 2012 1:14 pm
by El_Freddo
guyph_01 wrote:
-Also thinking of adding a little 12v air comp that can be useful to pump up the tube if needed.
I'd also be looking into getting a patch kit to keep on board
Cheers
Bennie
Posted: Thu Jan 12, 2012 6:17 pm
by guyph_01
El_Freddo wrote:I'd also be looking into getting a patch kit to keep on board
Cheers
Bennie
It takes 24-36hrs to dry so won't be much help. I'll hold on a roll of duck tape just in case:p
Posted: Fri Jan 13, 2012 7:38 am
by JPM
Is 'duck tape' that new stuff that only comes in a fluffy yellow finish? Apparently it is really nice BBQ'd with rice...
Sorry guy, couldn't resist.
Jayd
Posted: Fri Jan 13, 2012 2:10 pm
by guyph_01
No worries, lol, Duct tape it is then...., Excuse my French:)
Posted: Sat Jan 14, 2012 3:50 pm
by guyph_01
Posted: Sat Jan 14, 2012 11:13 pm
by RSR 555
guyph_01 wrote:No worries, lol, Duct tape it is then...., Excuse my French:)
We do all the time
So when are we taking it out?
Posted: Sat Jan 14, 2012 11:33 pm
by El_Freddo
guyph_01 wrote:Was surfing on google and found this, Gave me some ideas:) Its for sale over east for $12000
That sleazy guy should bring the cost down a few grand
So what ideas did you get Guy?
Cheers
Bennie
