Page 2 of 5
Posted: Tue Mar 19, 2013 5:32 pm
by El_Freddo
RSR 555 wrote:Oh great.. here we go.. thanks a lot Bennie.. this is all we need
Well, you can say "work it out yourself" or simply "no" - as they say, if you don't want to and are feeling pressured always say no
I'm thinking Guyph has a money pit he's not telling us about!!
Cheers
Bennie
Posted: Tue Mar 19, 2013 9:10 pm
by guyph_01
So far the Outback shocks,the rear lower arms and the front 2pot brakes are on the car. While the brakes where out i had them machined and had a fresh set of pads fitted too:)
The leather interior from the outback was cleaned, and is gone in the Liberty with leather care products etc to try and revive them. Turned out quite well. Also added the leather arm rest and basically all the better bits from the outback. The carpet was cleaned as best as possible and i've gone over all the trim.
Still have to remove the old tint, struggling with that as the previous idiot riped the tint out without heating the glue so now the glass has glue all over it!!!
Also, i laid some wires to be able to, 1 disconnect ABS while 4wdiving and 2 turn 2wd and 4wd by the flick of a switch, well switches:p
I still don't have an engine, Its proving hard to find a good EJ22 for cheap..., but i'm still looking:)
Posted: Wed Mar 20, 2013 11:02 am
by RSR 555
El_Freddo wrote:Well, you can say "work it out yourself" or simply "no" - as they say, if you don't want to and are feeling pressured always say no
Thanks for the tip.. did you read this Guyph?
El_Freddo wrote:I'm thinking Guyph has a money pit he's not telling us about!!
KPM Industries is a booming business.. must be careful not to get caught
Posted: Thu Mar 21, 2013 2:45 pm
by guyph_01
Ok the car is a rolling shell again:)
Now i need to find an engine and finish the lift kit:)
Posted: Thu Mar 21, 2013 3:27 pm
by RSR 555
EJ25 quadcam? or staying EJ22 this time
Are you going to make a front bar for this? so you can make one for me too
Posted: Thu Mar 21, 2013 5:21 pm
by guyph_01
RSR 555 wrote:EJ25 quadcam? or staying EJ22 this time
Staying EJ22, Much easier and i won't have to ask you for help since its not a conversion as it looks like you don't want to help me anymore!!:evil:
RSR 555 wrote:Are you going to make a front bar for this? so you can make one for me too
That all depends if you start behaving and be nice in your comments here:p
Posted: Fri Mar 22, 2013 3:53 am
by RSR 555
guyph_01 wrote:Staying EJ22, Much easier and i won't have to ask you for help since its not a conversion as it looks like you don't want to help me anymore!!:evil:
Really.. is this true? Does this mean I can get some of my own projects done??
guyph_01 wrote:That all depends if you start behaving and be nice in your comments here:p
Guess I'll be making my own then
Posted: Fri Mar 22, 2013 9:03 am
by Subydoug
Looks good Guy, though the rims are pretty filthy. Hope you find a suitable engine soon AAaaaaahhhhhchhhooooooSTIooooo
Regards
Doug
Posted: Fri Mar 22, 2013 2:52 pm
by guyph_01
Subydoug wrote:Looks good Guy, though the rims are pretty filthy. Hope you find a suitable engine soon AAaaaaahhhhhchhhooooooSTIooooo
Regards
Doug
Yeah those are temporary rims, just so i can roll the car around:)
Hey Paul, guess what i'm working on now????
Posted: Fri Mar 22, 2013 4:21 pm
by RSR 555
guyph_01 wrote:Hey Paul, guess what i'm working on now????
My new bumper replacement bullbar.. can't wait
Will it be ready by the time I get home?
Posted: Fri Mar 22, 2013 5:13 pm
by guyph_01
RSR 555 wrote:My new bumper replacement bullbar.. can't wait
Will it be ready by the time I get home?
Lol u'll be SOOOOO jealous.... Might take it out if i sell the car, Then You and JPM can have a bidding war for it lol....
Posted: Fri Mar 22, 2013 6:58 pm
by RSR 555
guyph_01 wrote:Lol u'll be SOOOOO jealous.... Might take it out if i sell the car, Then You and JPM can have a bidding war for it lol....
Why when I can just make one for me and Jayd.. then you can rip some other poor fella off
Posted: Fri Mar 22, 2013 7:09 pm
by JPM
I think you two need to work together on this project and put the whole KRudd/ JGillard thing to bed. It's a bit too Tony Grieg and Bill Lowry, the whole simmering passive aggression where there used to be nothing but pure man love.
I mean after all, with your combined skills I'm positive the end result will be a front bar of immense quality and strength, one that will suit the front end of my car, I mean our cars beautifully.
Guy- did you get my SMS photos?
Jayd- bringing back the love...
Posted: Fri Mar 22, 2013 9:52 pm
by Wagonman
+1 for a manhug between Guy and Paul. So much tension lol. But Paul if its not Guy taking up all your time it will be me
haha.
Look forward to seeing this silver lib out on the beach though with Guy and friends hangin out of both sunroofs!
Posted: Sat Mar 23, 2013 12:03 am
by guyph_01
Posted: Sat Mar 23, 2013 12:33 am
by Subydoug
Ouch mate, betya that stung a wee bit. Just go do some fishing for the next few days. The salt water will have it looking good. Its my remedy for my munted toe
.
Doug
Posted: Sat Mar 23, 2013 12:46 am
by WeeGee
pssht, just a flesh wound! Claim some sick days to get more time to work on the wagon. But really, I hope you're doing well...
Posted: Sat Mar 23, 2013 8:45 am
by TOONGA
Posted: Sat Mar 23, 2013 11:20 am
by JPM
Guy-
Two things, next time at the hospital DON'T let your brother/ cousin do the surgery on your foot! Seriously the photo with the nurse made me do a double take!
Secondly, pain is fleeting, glory lasts forever- and chicks dig scars!!!
You're not the first person on this forum to angle grind in Chinese safety boots, and I don't reckon you'll be the last.
Get well
Jayd
Posted: Sat Mar 23, 2013 11:58 am
by El_Freddo
JPM wrote:I think you two need to work together on this project and put the whole KRudd/ JGillard thing to bed. It's a bit too Tony Grieg and Bill Lowry, the whole simmering passive aggression where there used to be nothing but pure man love.
This is true, but the "new" dynamics of a long distance relationship are taking its toll on both parties.
Other than the Queensland safety boot incident everything's looking pretty good mate!
Cheers
Bennie
