I've looked into this on my L series. I'm going to make a plate that mounts from the swing arm closer to the diff so that the air bag is located in line with the chassis rail above. I might have to re-route some lines associated with the fuel tank but I'm ok with that.Rumbl1n wrote:so my next mod is to put airbags under the back my dad has a pair that came off his one tonner so im hoping we can mount them where the rear diff stops are located (because of the 4" lift there is quiet alot of room under there)
let me know what you think
The air bags I've got to play with have been donated from Tweety and are like these:
I've got to make up a top and bottom bracket to fit it in then run the air lines to a suitable point to air up and down as needed. I think it should be a sweet setup once completed!
Cheers
Bennie