Page 1 of 1
					
				STUMBLED ACROSS AUSUBARU AGAIN!!
				Posted: Mon May 13, 2019 4:38 pm
				by FROG
				Hi guys
found the forum active again!
hit me up for parts at discounted rates
Subaru genuine parts, Subaxtreme products 
Mazda Jeep Chrysler and Doge also
I will edit the current posts when I get time
regards FROG
			 
			
					
				Re: STUMBLED ACROSS AUSUBARU AGAIN!!
				Posted: Tue May 14, 2019 7:24 pm
				by El_Freddo
				It’s been a while Frog! Awesome to see you on the forum again!
My activities have stalled but I reckon I’ll be back at it soon enough! 
Cheers 
Bennie
			 
			
					
				Re: STUMBLED ACROSS AUSUBARU AGAIN!!
				Posted: Wed May 15, 2019 12:17 pm
				by Subyroo
				FROG wrote: ↑Mon May 13, 2019 4:38 pm
Hi guys
found the forum active again!
hit me up for parts at discounted rates
Subaru genuine parts, Subaxtreme products 
Mazda Jeep Chrysler and Doge also
I will edit the current posts when I get time
regards FROG
 
G'day and Welcome back Frog
I was curious as to what had happened to you when the Forum changed, now I know, you got left behind in the dust.  
 
   
   
  
 
			
					
				Re: STUMBLED ACROSS AUSUBARU AGAIN!!
				Posted: Thu May 16, 2019 2:02 pm
				by TOONGA
				Welcome back Mr Frog good to see you found us again
TOONGA
			 
			
					
				Re: STUMBLED ACROSS AUSUBARU AGAIN!!
				Posted: Fri Jun 21, 2019 7:23 am
				by Bumpty
				Do you like what we’ve done with the place, Froggy? And when I say we, I mean Andrew!
			 
			
					
				Re: STUMBLED ACROSS AUSUBARU AGAIN!!
				Posted: Sat Oct 17, 2020 8:57 am
				by Ramul
				Hi Frog,
I'm new to the group, just bought a 1990 Brumby. I'm chasing gear linkage kit and engine mounts all around, Can you help me out?
Thanks
Russell.
			 
			
					
				Re: STUMBLED ACROSS AUSUBARU AGAIN!!
				Posted: Sat Oct 17, 2020 9:12 am
				by El_Freddo
				Welcome to the forum Russell. 
Read up on the gear linkage mod as this will probably be the issue if you have the original 4 speed. 
Halfway down this thread is how I did mine.
If you have a 5spd conversion, you’ll need the bushes for the knuckle joint in the selector arm/rod to fix the slop. My L series has a temporary fix using a piece of cut down garden hose from 2016... it’s still working well so I haven’t got around to replacing with the proper bushes. 
Send Frog a PM, that might hopefully speed up his reply if he’s not out quad biking atm. 
Cheers 
Bennie