XV Ute ...
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
Progress ...
Tried using Sketchup for a bit & came up with this :
Wheel Nut
Slow progress I know, but learning as I go ...
P.S. - Does any body know how to get the 'Rotating Image' thingy uploaded along with it onto the 3D Warehouse Site ?
Cheers, Bantum ...
Edit : Updated link ...
Wheel Nut
Slow progress I know, but learning as I go ...
P.S. - Does any body know how to get the 'Rotating Image' thingy uploaded along with it onto the 3D Warehouse Site ?
Cheers, Bantum ...
Edit : Updated link ...
- 60766244
- Junior Member
- Posts: 586
- Joined: Fri Nov 09, 2012 3:32 pm
- Location: Kalamunda, Western Australia
Congrats. Learning curve is steep and downhill with Google Sketch so you'll work it out fairly fast I am sure. Seems good.
I'm building my "Ideal" shed on Google Sketch atm before I convert it to blueprints and it's a workout.
As for the 3D image rotator I find it works better in Google Chrome browser but dies out on other browers (Firefox, Safari, Chromium, etc) It may have to do with the flash/java scheme of things...
I'm building my "Ideal" shed on Google Sketch atm before I convert it to blueprints and it's a workout.
As for the 3D image rotator I find it works better in Google Chrome browser but dies out on other browers (Firefox, Safari, Chromium, etc) It may have to do with the flash/java scheme of things...
Otter the 2004 Outback with all the fruit.
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?
|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?
|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
Delayed ...
Ha - just went back to see if it had worked :
Just takes a while for it to load ...
Just takes a while for it to load ...
- 60766244
- Junior Member
- Posts: 586
- Joined: Fri Nov 09, 2012 3:32 pm
- Location: Kalamunda, Western Australia
Playing with the animate functions or a hellova lot of screenshots of the 360 degree thing?Bantum wrote:Ha - just went back to see if it had worked :
Just takes a while for it to load ...
It won't load more than a thumbnail to me.
Otter the 2004 Outback with all the fruit.
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?
|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?
|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
Update ...
Ok - I've done a bit more :
Look here for the 3D Model : Subaru XV Wheel
Will start working on the base of XV -Ute next ...
Look here for the 3D Model : Subaru XV Wheel
Will start working on the base of XV -Ute next ...
- 60766244
- Junior Member
- Posts: 586
- Joined: Fri Nov 09, 2012 3:32 pm
- Location: Kalamunda, Western Australia
Great skills mate. Good patience too. Your XV Ute will be a sight to behold.
Otter the 2004 Outback with all the fruit.
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?
|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?
|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
Wanted ...
Thanks ...60766244 wrote: ... Your XV Ute will be a sight to behold ...
P.S. - Has anyone got some under body shots of the XV engine bay, suspension, brakes ?
I'm Looking to model them in Sketch up ...
Cheers, Bantum ...
- 60766244
- Junior Member
- Posts: 586
- Joined: Fri Nov 09, 2012 3:32 pm
- Location: Kalamunda, Western Australia
Agreed! It's downloadable for free onto any computer, just google, "Sketchup Download" and in 5 minutes you can get playing.El_Freddo wrote:Full on mate! Tidy work on that sketch up - is it an easy program to use and do you need to download it or is it net based? I'm thinking of using this in one of my classes
Keep up the good work as always!
Cheers
Bennie
Otter the 2004 Outback with all the fruit.
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?
|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?
|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
More ...
Sketchup is relativley easy if you compared it to AutoCAD, although it does have less functions & can be a bitch trying to get compound curves to work ...El_Freddo wrote: ... Is it an easy program to use ? ...
Yep - free down load ...El_Freddo wrote: ... and do you need to download it, or is it net based ? ...
No worries, will do ...El_Freddo wrote: ... Keep up the good work as always ! ...
P.S. - Will post an update shortly ...
Cheers, Bantum ...
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
Update ...
Ok - I managed to get some 'virtual' work done on the ute over the weekend, here are the results :
Note : Added brake to the wheel ...
Then mocked up a drive line :
Note : Haven't quite got all the details right yet ...
Add : Any body got some photos of the under side of a XV ?
And finally a first draft of the side panels :
Note : Not finished yet, still need to go over it again to 'iron out' the kinks, gaps & missing bits ...
Still loads more to do though ...
Cheers, Bantum ...
Edit : Updated links ...
Note : Added brake to the wheel ...
Then mocked up a drive line :
Note : Haven't quite got all the details right yet ...
Add : Any body got some photos of the under side of a XV ?
And finally a first draft of the side panels :
Note : Not finished yet, still need to go over it again to 'iron out' the kinks, gaps & missing bits ...
Still loads more to do though ...
Cheers, Bantum ...
Edit : Updated links ...
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
Update ...
Done a bit more to the front end :
Note : Tidied up the side panels & added a front bumper bar, still needs a bit more work though ...
Next task will be looking at the rear end ...
Cheers, Bantum ...
Edit : Fixed Link ...
Note : Tidied up the side panels & added a front bumper bar, still needs a bit more work though ...
Next task will be looking at the rear end ...
Cheers, Bantum ...
Edit : Fixed Link ...
- 60766244
- Junior Member
- Posts: 586
- Joined: Fri Nov 09, 2012 3:32 pm
- Location: Kalamunda, Western Australia
Stirling work as always!
Otter the 2004 Outback with all the fruit.
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?
|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?
|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
Add ...
Done a little bit more ...
Note : Now have added the rear end, although I haven't quite finished the tail lights ...
Add : Also I might have to revisit how the tailgate folds down, as it interferes with the bumper ...
Next ... I'm thinking will be looking at the Cabin ? ...
Cheers, Bantum ...
Edit : fixed link ...
Note : Now have added the rear end, although I haven't quite finished the tail lights ...
Add : Also I might have to revisit how the tailgate folds down, as it interferes with the bumper ...
Next ... I'm thinking will be looking at the Cabin ? ...
Cheers, Bantum ...
Edit : fixed link ...
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
Small update ...
Yep, and then some creative licence ...El_Freddo wrote: ... are you just using photos ? ...
I would'nt go measuring it though, but it should be a close approximation. I'll add some screen shots later of the example used to 'follow', which were loaded in the background ...
Meanwhile, here is a small update of some details added to the rear end, see if you can pick the improvements ...
Cheers, Bantum ...
Edit : fixed link ...
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
Progress ...
Done some work on the Tail / Headlights :
I'm looking to intergrate them into 3D model ...
+ Some background images used for modeling :
Edit : Sorry some of the image links are lost - will see if can find replacements ...
I'm looking to intergrate them into 3D model ...
+ Some background images used for modeling :
Edit : Sorry some of the image links are lost - will see if can find replacements ...
- 60766244
- Junior Member
- Posts: 586
- Joined: Fri Nov 09, 2012 3:32 pm
- Location: Kalamunda, Western Australia
Amazing dedication to the cause. Looking very, very nice!
Otter the 2004 Outback with all the fruit.
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?
|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?
|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||