The AUSubaru.com.au Forums

While I was doing the XV Ute, I found a Brumby ...



I have now mashed it up into Sketchup form & can be found here :

http://sketchup.google.com/3dwarehouse/ ... evstart=12

It's still a bit rough & needs reworking ... Will post some pictures of it later ...

Also have done this :



http://sketchup.google.com/3dwarehouse/ ... evstart=12

Working towards making it a completed Series II model ...

Cheers, Bantum ...

There aren't a lot of drawings / blueprints / sketches etc. of the Brumby out there, but I did fid this though :



Note : This image was taken from Tamiya Base ...

I might see if I can transfer this into a CAD format ...

P.S. - If you do know of, or have seen other Brumby / BRAT drawings - let us know ...

Cheers, Bantum ...

Add : Doh - Tamiya Inc. has instructed TamiyaBase.com to no longer distribute their manuals to enthusiast. http://tamiyabase.com/index.php?option= ... 776#manual

So have to reposted it :



Ciao, Bantum ...

While I was doing the XV Ute, I found a Brumby ...
I have now mashed it up into Sketchup form & can be found here :

Excellent work, I wish I had your talent!

Thumbs up Thanks Tamiya ...

That would be one cool R/C model to have, I want one!!

Ok - I've now done a basic transfer of all the above into a 2D CAD file :



The pdf file of this can also be found on here : '85 Brumby 'Sport'


Next thing to do is convert the above drawing into a 3D model ...

Sorry - it might take a while though ..

Cheers, Bantum ...

Its only taken a few months to get this far :











Still got more to do on the inside ...

Cheers, Bantum ...

Renders ...









Will also upload the file to '3D whare house' when finished ...

Ciao, Bantum ...

Another sketch I did for FB :



Full size image in PDF format can be down loaded here : downloads.php?do=file&id=144

Cheers, Bantum ...

Bloody hell mate that brumby model is awesome.

So when's the tooling being made up to reproduce these runners?

Cheers

Bennie

Thanks Bennie ....

The 3D model will be made available on 3D warehouse when finished. ( might take a while though ) Then you can decide what scale to print it out at ...

I'm also working on making a mould for vacuum forming it in 1/10 scale. Still gota finish all the other bits before I get round to though ...

One thing at a time as they say ...

Cheers, Bantum ...

bloody awesome mate ! I like the antennae delete - makes for easier polishing

Where on earth do you find the time for this!? I barely have time to work on my EJ swap!

Had also done these badges : (as part of the 3D Model )







A download of each is available via clicking on image links ...

Add : + this one for Steptoe :



Cheers, Bantum ...

I need a 3D printer for that last badge!

That'd be awesome on the tailgate - not that I really need it with the plates I've got...

Cheers

Bennie

Phizinza wrote:... Where on earth do you find the time for this !? ...

Ha - I have plenty of it apparently ... ( still on waiting list to have my back op ) Not enough of the other stuff though ...

Nubaru wrote:... Bloody awesome mate ! I like the antennae delete - makes for easier polishing ...

Thanks, it wasn't specifically a delete ... ( more like an omission ) I'm intending to put something back on the roof / roll bar - more to come on that later ...

El_Freddo wrote: ... I need a 3D printer for that last badge ... !

I'm still working on the one I'm building ...( nearly finished though ) They are getting cheaper too !

Cheers, Bantum ...

okay Bantum !! That is what I am looking at for front guard recesses, now probably should have requested you print them in just one material so they look a little different, sort of low sheen, metallic colour, satin chrome look - titanium like that fellas new jaw piece !!

Another bright idea of mine for 3D printing - orthotics !

Have finished working on the 3D printer, but still have more to do on the scanner ( yet to get it working correctly ) + hope to have it finished soon.

Will try & post some pictures later, if I can get photo bucket to work that is ... :/

Edit : Draft Paper model :





Welcome to trial it & report back any flaws - An edited & corrected version can then be done ...

P.S. - Found a new image host ...

Ciao, Bantum ...

Awesome, I want a brumby badly!

Sent from my HTC_0PJA10 using Tapatalk

Yep - so wanted a scale model that looked like real one, but could not find any so had to go about making my own - It's taking a while to get there though ...

Add: Update :






P.S. - I found a new 'google' web photo host, as I've reached the limits set within 'Photo bucket' & can't do what I'd like with the account anymore ( I'm not paying for shit ) So will have to go back though all my threads & reload stuff ...

Ciao, Bantum ...

can't one just start a new gmail account like [email protected] and feed that into photobucket as a new client that no pay for sh!t and start again? PB has got so slow, keeps dumping a stupid bear offering cheap holidays in a hidden pop up and then my protection software sometimes alerts me to sh!t going on soon after. Coincidence of course!

Yep already tried that trick, only so many times you can do that before going over account limit of 2 GB ...

I also got sick of slow service & adds so looked around to see what else there was - Google offers free hosting, with unlimited amounts - so will give them a try & see how it goes ... ��

Add : Have since found out that you must 'share' the album so that others can see your pictures - Doh ...

Ciao, Bantum ...