22-bsb
- maxxair
- Junior Member
- Posts: 393
- Joined: Wed Mar 26, 2008 9:32 am
- Location: HELL!!!, or Rockhampton, eithers fine
- Contact:
22-bsb
This is my Brumby, its undergoing a much needed Full Rebuild. Theres much to do so ill let the pictures to most of the talking. Enjoy.
The last time in one peice (i have been working on it for a coupla years already though)
Start at the front,
gotta CUT the Xmember out!
Hook the crane up
Pull the motor out (thats my dog leash btw)
and thats what u get. ewww.
The last time in one peice (i have been working on it for a coupla years already though)
Start at the front,
gotta CUT the Xmember out!
Hook the crane up
Pull the motor out (thats my dog leash btw)
and thats what u get. ewww.
- TOONGA
- Elder Member
- Posts: 5335
- Joined: Sat May 30, 2009 10:15 am
- Location: Australind closer to where they divided by zero
- Contact:
I just noticed you are in Rockvegas I lived there for nearly 2 years and Im still trying to get over it do the still have the bulls with no testicles at either end of the town?
thats a big load of work by the way well done
I take it you are going to flood the engine bay with paint once its all cleaned up
be a shame not too
TOONGA
thats a big load of work by the way well done
I take it you are going to flood the engine bay with paint once its all cleaned up
be a shame not too
TOONGA
- maxxair
- Junior Member
- Posts: 393
- Joined: Wed Mar 26, 2008 9:32 am
- Location: HELL!!!, or Rockhampton, eithers fine
- Contact:
with the firewall done, i started to get to know my chassis.
another peice NOT going back on.
both sides, Naturally.
I decided if im gunna do all this, i mite as well make it fit a wrx motor. incase i NEED one later
I use Bonnet Rio for the shape, and has a nice looking hole in it. Makes for a Factory look
I also weld a big washer inside the hole, for extra strength.
- maxxair
- Junior Member
- Posts: 393
- Joined: Wed Mar 26, 2008 9:32 am
- Location: HELL!!!, or Rockhampton, eithers fine
- Contact:
T'su, you'll have to wait to find out, as I do. havent driven it more than one kilometer. and that was, well, scary. should have heard it (shudders....) Rust?? you aint seen nuthin yet!!!
Toonga, Rocky hasn't improved, i assure you. i only moved here (from yeppoon) to buy my house (coz yeppoons too dear) and yes mate, it will be painted. the whole car will be painted. Blue Silver and Black
Toonga, Rocky hasn't improved, i assure you. i only moved here (from yeppoon) to buy my house (coz yeppoons too dear) and yes mate, it will be painted. the whole car will be painted. Blue Silver and Black
- brumbyrunner
- General Member
- Posts: 1743
- Joined: Mon Apr 10, 2006 10:00 am
- Location: SEQ
You've been quiet lately Rohan, I wondered what had happened to you and Jeff's old ute. I didn't realise it was that bad, you've certainly got your work cut out getting it back up to scratch but it's looking good so far.
I reckon you should shout yourself a late model turbo front cut and Crossbred 5 stud conversion while your at it.
I reckon you should shout yourself a late model turbo front cut and Crossbred 5 stud conversion while your at it.
Settlement Creek Racing
- Outback bloke
- Senior Member
- Posts: 2103
- Joined: Fri Sep 30, 2005 10:00 am
- Location: Morayfield - Queensland
- Contact: