Hypothetical - Stolen Engines Info

Go wild here with what ever takes your fancy ...
Post Reply
User avatar
BlackMale
General Member
Posts: 1750
Joined: Thu Oct 06, 2005 10:00 am
Location: Out Bush

Hypothetical - Stolen Engines Info

Post by BlackMale » Tue Mar 28, 2006 7:03 pm

If pop quiz’s were not enough I would not mind asking a hypothetical…

I know that there is not a lot of detail/content around this however something that maybe we should be aware of and/or take into consideration… Therefore the hypothetical question is as follows

“What is the worst that could happen if you have done an engine conversion on your car (which is registered, and does not require roadworthy cert every year like in NSW) and then you discover that the engine (engine number) is reported stolen”?

Note that if you have read this far this is a hypothetical question and I am in no way asking suggesting/supporting/blar blar blar that people should engage in such behaviours or anything, I am just proposing this to a motoring forum that does a lot of our own engine conversion work?

I would be interested if anyone has any experiences, information about this and/or where it could be located.

Thanks Crew - L8a...

User avatar
Oversteer
Junior Member
Posts: 122
Joined: Sun Oct 09, 2005 10:00 am

Post by Oversteer » Tue Mar 28, 2006 7:19 pm

1st off if your car has a suspect engine/number.....and you haven`t done a number change with the cops and your insurance company(which would pick it when you tried to change) all your rego and insurance is null and void.....3rd party personal injury void too, bad thing if the shiz hits the fan...but sometimes they don`t even pick that !

If you go to register a car with a stolen number, it will be impounded(if copper can be f`d of course !).....and if you can prove it wasn`t yopur wrong doing you may get the car back....or it will be returned to owner or auctioned eventually, worst case is its impounded and your charged with receiving stolen goods.

Bottom line, if you think somthing is sus, ring up revs and or the cops and inquire about said number.

OS
MY05 GT-STI DCCD 6spd 13.88at98.7
88 FJ62 Cruiser-5.0ChevTPI TT,6psi,Hi6,044,Wolf3dV4,FMIC

User avatar
mattims
Junior Member
Posts: 444
Joined: Tue Oct 04, 2005 10:00 am
Location: Perth, WA
Contact:

Post by mattims » Tue Mar 28, 2006 10:28 pm

come on jaff .. theres no way that wreck was stolen ...

and my L still has bigger problems anyway. Like clutch ... and the new one .. the front end has moved on from a minor float .. to what really feels like walking.
Image

User avatar
AndrewT
Senior Member
Posts: 4777
Joined: Tue Oct 04, 2005 10:00 am
Location: WA
Contact:

Post by AndrewT » Wed Mar 29, 2006 1:16 am

hehe........where DID you get that EA82turbo from Jaffa! :D

User avatar
BlackMale
General Member
Posts: 1750
Joined: Thu Oct 06, 2005 10:00 am
Location: Out Bush

Post by BlackMale » Thu Mar 30, 2006 1:23 pm

Looks like all fingers are pointed at me… tis ok Matt your in the clear as far as I know, and Andrew mine was from a Jap Import place.

Not wanting to change the rego just saying what if, we can use mine as the eg. I get the engine put it in the car and do nothing with it other then drive around. Not attempting to change rego or anything. Now what IF that engine was stolen how would anyone know? Unless you get pulled over by the police they asks you to inspect.

User avatar
tim_81coupe
General Member
Posts: 1693
Joined: Tue Oct 04, 2005 10:00 am
Location: Perth

Post by tim_81coupe » Thu Mar 30, 2006 6:34 pm

Hmmm... speaking of stolen engines I know where about six 2UZ 'Yota Mota's are sitting. They're not stolen yet.....
Anyone wanna do a late model hi-po V8 build?
:P :roll:
82 MY Wagon, EJ20G

87 RX, EJ20G

89 Brumby, EA81

12 BRZ, FA20

User avatar
subanator
Junior Member
Posts: 664
Joined: Fri Oct 07, 2005 10:00 am
Location: Perth WA

Post by subanator » Fri Mar 31, 2006 12:21 am

Jaffa wrote:Now what IF that engine was stolen how would anyone know? Unless you get pulled over by the police they asks you to inspect.
Jaffa, a bloke I work with has a '96 Commodore V8 ute. The engine number didnt match the rego info when he was pulled over. They informed him much to his surprise it didnt really matter as it didnt come up stolen!
'03 Forester X, stock standard for now.

'89 EA82T Touring Wagon, 5-speed D/R, 14" alloy wheels, bullbar. (Past ride)

'81 MY wagon, 3" lift, 5-speed D/R, Weber, 14x27" tyres. (Past ride)

User avatar
tim_81coupe
General Member
Posts: 1693
Joined: Tue Oct 04, 2005 10:00 am
Location: Perth

Post by tim_81coupe » Fri Mar 31, 2006 8:58 am

subanator wrote: Jaffa, a bloke I work with has a '96 Commodore V8 ute. The engine number didnt match the rego info when he was pulled over. They informed him much to his surprise it didnt really matter as it didnt come up stolen!
I like that. V8 Commodore ute, WHEN he was pulled over.
:lol:
82 MY Wagon, EJ20G

87 RX, EJ20G

89 Brumby, EA81

12 BRZ, FA20

User avatar
subgiraffe
Junior Member
Posts: 85
Joined: Tue Oct 04, 2005 10:00 am
Location: wa

Post by subgiraffe » Fri Mar 31, 2006 4:44 pm

Beware Jaffa -- we're onto you! :roll: :roll:

I wouldn't go grinding off engine numbers and replacing them either -- the original stamping can still be read after you've ground the number off (it only takes a bit of x-ray diffraction to pick up the old number) :?

Post Reply

Return to “Open Slather”