Just wondering if springs/shocks from Gen1 Liberty Auto Wagon will fit into Gen2 Manual wagon. Assuming there is no difference auto/manual.
Just asking cos I want to renew the suspension and can get a second hand pedders shocks/springs set for $250.
ALSO:
Wanting to stiffen up the rear swaybar. Have learnt that the bar for the outback is 19mm and liberty 16mm I'm wondering if I can get a used part and save on an aftermarket one.
Any thoughts?
James
Will it fit? - GenI Lib shocks/springs into GenII and Outback rollbar into Lib
-
AlpineRaven
- Senior Member
- Posts: 3682
- Joined: Wed Oct 19, 2005 10:00 am
- Location: Melbourne, Victoria, Australia.
Struts will fit but not the hats.
Automatic/manual struts are both the same.
You can use outback sway bar in your liberty - no problems and worth it as i noticed the difference in my liberty as well.
Cheers
AP
Automatic/manual struts are both the same.
You can use outback sway bar in your liberty - no problems and worth it as i noticed the difference in my liberty as well.
Cheers
AP
Subarus that I have/had:
1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic
1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic