Subie Boys Lealaroo's liberty.

rtcb65 · Post by **rtcb65** » Wed Mar 31, 2010 6:38 pm

The white one is still slowly moving forward.

Lea now has her liberty on the road. As stated a couple of posts ago, we got another liberty and the white has dropped down a generation. Here is a pick of Lea's lib.

riksta · Post by **riksta** » Wed Mar 31, 2010 8:36 pm

now thats a pretty red one, nice one guy's. I hope Lea likes her Lib.
Its a good thing when the woman in your life are happy, life is a hole lot nicer.

And when you know thay are out on the road it's nice to now that thay are safe out there in a Liberty.

Rik.

rtcb65 · Post by **rtcb65** » Thu Jul 15, 2010 11:03 am

A few of the bolt on's were not up to scratch. A friend had a couple of doors that we got off him ( thanks jeff ) , and the guards off the white liberty and the bumpers off the white one. So we are prepping them ready to go on the red one . This way, there is small down time with the car.

rtcb65 · Post by **rtcb65** » Thu Jul 15, 2010 7:07 pm

Guards ready for paint. Doors to be sanded and bumpers are almost there as well .

rtcb65 · Post by **rtcb65** » Wed Jul 21, 2010 7:12 pm

A little more done . Doors, guards and bumpers are done . Just have the final sand back to do. Just have to paint the mirrors and clear coat them.

LEALAROO · Post by **LEALAROO** » Wed Jul 21, 2010 8:45 pm

hii everyone, yes riksta i am very happy with my liberty...i love her. the doors guards & bumpers look really great, can't wait for the rest of the car to get a bit of a clean up & respray, then she'll be even sweeter.

rtcb65 · Post by **rtcb65** » Fri Jul 23, 2010 10:13 pm

Pulled half of the parts off today that are going to be replaced. Got most of the removed items replaced. We are going to wait for the clear to set for at least a week before giving the final 1200 sanding.

rtcb65 · Post by **rtcb65** » Thu Jul 29, 2010 6:59 pm

The liberty has been back together now for a week . Give or take. So thought it was time to start making the suspension a little better . It now has King springs all round. Also an alarm and key less entry.

rtcb65 · Post by **rtcb65** » Wed Oct 20, 2010 11:13 am

The auto in the liberty spat the dummy the other day, so out it comes. Cross fingers , we have a gen 2 auto that we are putting .

rtcb65 · Post by **rtcb65** » Thu Oct 21, 2010 7:05 pm

Auto is out, tomorrow we will replace rear main seal and hope to get it all back together. Steve done some mods on the auto computer. Made a gen 2 auto computer mount up to where the gen 1 mounts. That way there is no zip ties or just have the computer bounce around , or anything like that.

vincentvega · Post by **vincentvega** » Fri Oct 22, 2010 10:34 am

The gen2 auto computer wont work in your gen1 mate. just use the gen1 computer with the gen2 box

roscoruby · Post by **roscoruby** » Fri Oct 22, 2010 5:26 pm

vincentvega wrote:The gen2 auto computer wont work in your gen1 mate. just use the gen1 computer with the gen2 box

Gearbox is in and have to agree with V.V. , the gen 2 computer didn't work the gearbox in the gen1. But the gen1 computer is working the gen2 box so far.

vincentvega · Post by **vincentvega** » Fri Oct 22, 2010 8:59 pm

it will be fine mate. you wont have any issues with the computer

rtcb65 · Post by **rtcb65** » Tue Mar 08, 2011 11:32 am

A bit more experience is being learnt. It is now time to pull an Ej down and learn about them. One day the engine got alittle hot and found bubbles in the radiator. Out it came and apart she went.

Heads refaced, new head gaskets, new head bolts, tappet cover gaskets. Then new cam seals, new rear main seal, new water pump, new oil pump. Then to finish it off, new timing belt and pulleys and tensioner. We are half way to having it done.

rtcb65 · Post by **rtcb65** » Tue Mar 22, 2011 3:27 pm

It looks likes our first play with doing up an E.J.22 was successful . So far anyway. Got it all together and it started to rattle ( in older cars, the lifter tick ) . Turns out to be the lash adjusters were gummed up. So off the cams came and they were cleaned up and put back in. Sound went away. With the price of new ones. We cleaned the old ones.

FROG · Post by **FROG** » Tue Mar 22, 2011 4:55 pm

rtcb65 wrote: With the price of new ones. We cleaned the old ones.

I would have done the same Rick

:???:
Would buy one if necessary but not 16 at that price

rtcb65 · Post by **rtcb65** » Tue Mar 22, 2011 9:06 pm

FROG wrote:I would have done the same Rick :???:
Would buy one if necessary but not 16 at that price

Not wrong Frog. And by the way, major thanks for chasing up the parts we got from you. And another major thanks goes to jeff for the parts he chased up for us as well. Thanks Guys.