brumby top radiator hose

General Subaru Talk - Media / News / Stories ...
Post Reply
User avatar
Creamfeeder
Junior Member
Posts: 31
Joined: Tue Aug 19, 2008 5:29 pm
Location: Inner Sydney NSW

brumby top radiator hose

Post by Creamfeeder » Sat Dec 18, 2010 2:43 pm

howdy, i'm in need of a top radiator hose for my 92brumby. anyone got one nearish sydney? also, im really confused about whether my brumby is a my or an l series?how do you find this out and how much difference is there between the two?

User avatar
TOONGA
Elder Member
Posts: 5339
Joined: Sat May 30, 2009 10:15 am
Location: Mandurah where they divided by zero
Contact:

Post by TOONGA » Sat Dec 18, 2010 3:00 pm

Your brumby is an MY it should have an EA81 motor in it. It will have EA81 written on the block near the distributor, if it doesn't have an EA81 motor then you will need a custom radiator hose.

http://en.wikipedia.org/wiki/Subaru_EA_engine

http://www.economysuperstar.com/milesfo ... ossary.htm

hope this helps

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
Backyard_Brumby
Junior Member
Posts: 259
Joined: Wed Dec 01, 2010 10:47 am
Location: Brisbane
Contact:

Post by Backyard_Brumby » Sat Dec 18, 2010 3:45 pm

as far as the hose, once you confirm its the EA 81 your local super cheap etc should have one for under $25
[SIGPIC][/SIGPIC]James :D

User avatar
Creamfeeder
Junior Member
Posts: 31
Joined: Tue Aug 19, 2008 5:29 pm
Location: Inner Sydney NSW

Post by Creamfeeder » Sat Dec 18, 2010 5:22 pm

yeah I have no doubts about iut being an ea81, thought there might have been other differences between the two aswell though.. thanks for clearing that up, Ill get onto super cheap asap then. Thanks guys

Post Reply

Return to “Subaru Chat”