subaextreme bash plate
- FROG
- General Member
- Posts: 1409
- Joined: Fri Feb 23, 2007 12:41 pm
- Location: UNDER THE SOUTHERN CROSS GRIFFITH NSW
- Contact:
subaextreme bash plate
Ordered a bash plate for an Outback diesel
looks the goods in 4mm alloy plate
reasonable bucks too I thought
Will be fitting it next week , instuctions seem nice and easy to follow
will report back when its done with some more pics
looks the goods in 4mm alloy plate
reasonable bucks too I thought
Will be fitting it next week , instuctions seem nice and easy to follow
will report back when its done with some more pics
- Attachments
-
- suba 001.jpg (60.6 KiB) Viewed 4600 times
GRAB THE VIN FROM DONOR VEHICLES
AUSubaru member specials
Brumby EA81 Oil Pump kit (4 x 'o'rings + gasket) posted Australia wide $22!
Brumby sloppy shifter bush kit $44 posted
email me
http://www.domsmotors.com.au
NOW DISTRIBUTING FOR SUBAXTREME BASH PLATES, NUDGE AND BULLBARS
- FROG
- General Member
- Posts: 1409
- Joined: Fri Feb 23, 2007 12:41 pm
- Location: UNDER THE SOUTHERN CROSS GRIFFITH NSW
- Contact:
Forester Bash plate
will be going on a customers car next week
looks the goods
will be going on a customers car next week
looks the goods
GRAB THE VIN FROM DONOR VEHICLES
AUSubaru member specials
Brumby EA81 Oil Pump kit (4 x 'o'rings + gasket) posted Australia wide $22!
Brumby sloppy shifter bush kit $44 posted
email me
http://www.domsmotors.com.au
NOW DISTRIBUTING FOR SUBAXTREME BASH PLATES, NUDGE AND BULLBARS
- canberra_fozza
- Junior Member
- Posts: 1
- Joined: Wed Mar 30, 2011 8:09 pm
- Location: Canberra
- FROG
- General Member
- Posts: 1409
- Joined: Fri Feb 23, 2007 12:41 pm
- Location: UNDER THE SOUTHERN CROSS GRIFFITH NSW
- Contact:
http://www.subaxtreme.com.au/subaru/bul ... icing.htmlcanberra_fozza wrote:what are these roughly going for?
linky for pricing ^ I may work out something for Ausubaru members if all goes well
yeah Im quite impressed with the constructionsven '2' wrote:Quality construction - looks the goods too
was wary of the words "cast" , "aluminium" and "sump guard" in the same sentance but now seeing it first hand I think the design is quite bloody good
GRAB THE VIN FROM DONOR VEHICLES
AUSubaru member specials
Brumby EA81 Oil Pump kit (4 x 'o'rings + gasket) posted Australia wide $22!
Brumby sloppy shifter bush kit $44 posted
email me
http://www.domsmotors.com.au
NOW DISTRIBUTING FOR SUBAXTREME BASH PLATES, NUDGE AND BULLBARS
- FROG
- General Member
- Posts: 1409
- Joined: Fri Feb 23, 2007 12:41 pm
- Location: UNDER THE SOUTHERN CROSS GRIFFITH NSW
- Contact:
Postage
:D:D no worries at all tazataza wrote:Want to send me an SF Forester bashplate? I'll pay the postage :P lol
postage is $500.00 out to you
GRAB THE VIN FROM DONOR VEHICLES
AUSubaru member specials
Brumby EA81 Oil Pump kit (4 x 'o'rings + gasket) posted Australia wide $22!
Brumby sloppy shifter bush kit $44 posted
email me
http://www.domsmotors.com.au
NOW DISTRIBUTING FOR SUBAXTREME BASH PLATES, NUDGE AND BULLBARS
- FROG
- General Member
- Posts: 1409
- Joined: Fri Feb 23, 2007 12:41 pm
- Location: UNDER THE SOUTHERN CROSS GRIFFITH NSW
- Contact:
Just realised I hadnt updated thisFROG wrote:Ordered a bash plate for an Outback diesel
looks the goods in 4mm alloy plate
reasonable bucks too I thought
Will be fitting it next week , instuctions seem nice and easy to follow
will report back when its done with some more pics
fitting went well 20 minutes and is still attached to the car I will grab a fitted pic, he lives across the road from me
GRAB THE VIN FROM DONOR VEHICLES
AUSubaru member specials
Brumby EA81 Oil Pump kit (4 x 'o'rings + gasket) posted Australia wide $22!
Brumby sloppy shifter bush kit $44 posted
email me
http://www.domsmotors.com.au
NOW DISTRIBUTING FOR SUBAXTREME BASH PLATES, NUDGE AND BULLBARS
- FROG
- General Member
- Posts: 1409
- Joined: Fri Feb 23, 2007 12:41 pm
- Location: UNDER THE SOUTHERN CROSS GRIFFITH NSW
- Contact:
http://www.subaxtreme.com.au/subaru/bul ... berty.htmlVenom wrote:Are they still doing front bars for Gen2 Liberty/outback? I've tried contacting them with no luck.
look here and drop me a pm
cheers
Andy
GRAB THE VIN FROM DONOR VEHICLES
AUSubaru member specials
Brumby EA81 Oil Pump kit (4 x 'o'rings + gasket) posted Australia wide $22!
Brumby sloppy shifter bush kit $44 posted
email me
http://www.domsmotors.com.au
NOW DISTRIBUTING FOR SUBAXTREME BASH PLATES, NUDGE AND BULLBARS
any chance of getting him to put together a bash plate together for a gen 1 liberty and or the mighty l-series..? probably not worth constructing a cast for the limited number of patrons looking for them but worth a try.
"the wisest of men followed the stars"
<a href="http://www.ausubaru.com/forum/showthrea ... 200">CHLOE THE LIBERTY</a>
to do list:
-3" strut, 2" body lift uni mid-year break
<a href="http://www.ausubaru.com/forum/showthrea ... 200">CHLOE THE LIBERTY</a>
to do list:
-3" strut, 2" body lift uni mid-year break
- FROG
- General Member
- Posts: 1409
- Joined: Fri Feb 23, 2007 12:41 pm
- Location: UNDER THE SOUTHERN CROSS GRIFFITH NSW
- Contact:
Arrrrgghh bloody hell Jules now Im researching annealing aluminium , bloody school teachers
now Im thinking how strong should it be??
if its too tough the car breaks yes???
its stated on website that the type of alloy is "easily weldable" so Im thinking something has to give and be repairable as a sacrifice for the good of the integrity of the vehicle
thoughts please ?
now Im thinking how strong should it be??
if its too tough the car breaks yes???
its stated on website that the type of alloy is "easily weldable" so Im thinking something has to give and be repairable as a sacrifice for the good of the integrity of the vehicle
thoughts please ?
GRAB THE VIN FROM DONOR VEHICLES
AUSubaru member specials
Brumby EA81 Oil Pump kit (4 x 'o'rings + gasket) posted Australia wide $22!
Brumby sloppy shifter bush kit $44 posted
email me
http://www.domsmotors.com.au
NOW DISTRIBUTING FOR SUBAXTREME BASH PLATES, NUDGE AND BULLBARS
- TOONGA
- Elder Member
- Posts: 5336
- Joined: Sat May 30, 2009 10:15 am
- Location: Australind closer to where they divided by zero
- Contact:
2 ways I know of to anneal aluminium
1. nitrogen rich atmosphere in an electric furnace with a set temperature for a set time the aluminium is then allowed to stand and cool.
2. an aqueous solution of sodium hydroxide, glycerol and other fillers aka soap painted on the surface of the aluminium to an even coat. the aluminium is then heated until the soap turns carbon black then left to cool and cleaned when cold.
TOONGA
1. nitrogen rich atmosphere in an electric furnace with a set temperature for a set time the aluminium is then allowed to stand and cool.
2. an aqueous solution of sodium hydroxide, glycerol and other fillers aka soap painted on the surface of the aluminium to an even coat. the aluminium is then heated until the soap turns carbon black then left to cool and cleaned when cold.
TOONGA
- FROG
- General Member
- Posts: 1409
- Joined: Fri Feb 23, 2007 12:41 pm
- Location: UNDER THE SOUTHERN CROSS GRIFFITH NSW
- Contact:
Fitted
Looks great , customer is happy 15 minutes to fit and $352.00
GRAB THE VIN FROM DONOR VEHICLES
AUSubaru member specials
Brumby EA81 Oil Pump kit (4 x 'o'rings + gasket) posted Australia wide $22!
Brumby sloppy shifter bush kit $44 posted
email me
http://www.domsmotors.com.au
NOW DISTRIBUTING FOR SUBAXTREME BASH PLATES, NUDGE AND BULLBARS
- FROG
- General Member
- Posts: 1409
- Joined: Fri Feb 23, 2007 12:41 pm
- Location: UNDER THE SOUTHERN CROSS GRIFFITH NSW
- Contact:
Not mine
I've asked customer to report back
He gets it serviced here so I will see it every 12,500 klm
Be interesting anyway
I've asked customer to report back
He gets it serviced here so I will see it every 12,500 klm
Be interesting anyway
GRAB THE VIN FROM DONOR VEHICLES
AUSubaru member specials
Brumby EA81 Oil Pump kit (4 x 'o'rings + gasket) posted Australia wide $22!
Brumby sloppy shifter bush kit $44 posted
email me
http://www.domsmotors.com.au
NOW DISTRIBUTING FOR SUBAXTREME BASH PLATES, NUDGE AND BULLBARS
- 2nd Hand Yank
- Junior Member
- Posts: 674
- Joined: Tue Jun 28, 2011 11:26 pm
- Location: SE Brisbane, QLD