Shed arrangements/organisation. Show us your best and worst

Go wild here with what ever takes your fancy ...
User avatar
T.Farm.Brumby
Junior Member
Posts: 379
Joined: Wed Jan 04, 2012 8:37 pm
Location: North Brisbane

Shed arrangements/organisation. Show us your best and worst

Post by T.Farm.Brumby » Sat Mar 23, 2013 10:29 pm

Great idea from 60766244 the other day. Just to get a look at everyone's set-ups and organisation for their sheds, might pick up an idea here or there :)

So here's the organisation in my outfit.

These are the shelves we made. Not the prettiest or really the sturdiest things in the world but they get the job done. The job being, getting stuff off the ground and keeping it there
Image
Image

These are also a ridiculously handy thing. Couple of different ways of having them too (you can see another rack of shelves in the back of this one too, same address)
Image
Image

Random bits and bobs with no other home. Plus the most damn well organised grouping of sockets you've ever seen
Image
Image

Fishing/camping "storage"
Image

Any and every kind of idea welcome, just trying to get a bit more organised and I reckon a lot of you would have some good arrangements.

Cheers,
Tom.
All The Rigs:

'86 RX Turbo "Thor"
'89 Brumby "Emma"
'89 Brumby "Brumbylicious"
'03 Outback "Uma"
'05 Forester
'14 Forester Luxury (My goodness is it schmick!)

User avatar
Silverbullet
Senior Member
Posts: 2858
Joined: Mon Aug 23, 2010 6:20 pm
Location: Adelaide

Post by Silverbullet » Sat Mar 23, 2013 10:39 pm

Good idea! I'll take some pics of our tiny shed tomorrow. We're getting it up to quite a nice "small workshop" status now, but keeping the bench free and a decent space to walk around in is a never ending battle. More than half the floor space is taken up with my car parts :oops:
Will it ever end!?
-EA81 TWIN CARB!!!!
-L series 5 speed
-Custom paint job
-2" lift
-Full custom re-wire
-L series front end
Image

User avatar
T.Farm.Brumby
Junior Member
Posts: 379
Joined: Wed Jan 04, 2012 8:37 pm
Location: North Brisbane

Post by T.Farm.Brumby » Sat Mar 23, 2013 10:51 pm

Silverbullet wrote:Good idea! I'll take some pics of our tiny shed tomorrow. We're getting it up to quite a nice "small workshop" status now, but keeping the bench free and a decent space to walk around in is a never ending battle. More than half the floor space is taken up with my car parts :oops:
Mate, preaching to the choir hahah. I'm working out of one shed, dad has another (but hates working on vehicles, the fool) so that one's full of camping and farm gear.

Half the floor space in my shed is now taken up with spare Brumby gear and bits and pieces I have yet to install. Never a free bench, always have less than half a metre of space around the vehicle inside the shed :(

Exhibit A: Roxy driven into 1 bay of my shed, other bay is entirely full of gear, and so I have to starve myself for 2 days before doing any work or I don't fit in there with the bitch :p
Image
All The Rigs:

'86 RX Turbo "Thor"
'89 Brumby "Emma"
'89 Brumby "Brumbylicious"
'03 Outback "Uma"
'05 Forester
'14 Forester Luxury (My goodness is it schmick!)

User avatar
niterida
General Member
Posts: 1158
Joined: Sun Apr 13, 2008 5:45 pm
Location: Geraldton WA

Post by niterida » Sat Mar 23, 2013 10:54 pm

Old Shed :
Image

New Shed :
Image

Image
[SIGPIC][/SIGPIC]

User avatar
T.Farm.Brumby
Junior Member
Posts: 379
Joined: Wed Jan 04, 2012 8:37 pm
Location: North Brisbane

Post by T.Farm.Brumby » Sat Mar 23, 2013 11:06 pm

niterida wrote:Old Shed :
Image
How do you do this???

I'll get a picture of my whole shed with no car in it tomorrow, it's to the point of embarrassing compared to this :-(

Even the bloody concrete is clean!
All The Rigs:

'86 RX Turbo "Thor"
'89 Brumby "Emma"
'89 Brumby "Brumbylicious"
'03 Outback "Uma"
'05 Forester
'14 Forester Luxury (My goodness is it schmick!)

User avatar
60766244
Junior Member
Posts: 586
Joined: Fri Nov 09, 2012 3:32 pm
Location: Kalamunda, Western Australia

Post by 60766244 » Sun Mar 24, 2013 12:39 am

Digging this thread. :cool:

I'll post photos of mine once these new benches are done and all the tools have homes! Right now anarchy reigns. :rolleyes:

Niterida - That's superb looking!

Tom - Looks like you cram a lot in there. Reminds me of MTB92's shed before he scrubbed it out to build Nigel. Still looks fairly organized.
Otter the 2004 Outback with all the fruit.
Image
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?

|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||


User avatar
Silverbullet
Senior Member
Posts: 2858
Joined: Mon Aug 23, 2010 6:20 pm
Location: Adelaide

Post by Silverbullet » Sun Mar 24, 2013 1:17 pm

This is our tiny shed as it is now, it's always changing though :)
View from the door
Image
Just inside, the grinder is by the door so the dust can go outside, also better light. Also where 1 set of spanners and sockets live, i've got another set in it's box.
Image
Shelves below where the power tools live, and my welder which needs to go on a trolley under the bench soon.
Image
One end of the bench with trays for all the nuts, bolts, drill bits and misc
Image
And the other end of the shed with my engine, gearbox, diff, bike, bee hive boxes and the shelving on the right has my twin inlet manifold, carbs and other misc car parts :p
Image
Will it ever end!?
-EA81 TWIN CARB!!!!
-L series 5 speed
-Custom paint job
-2" lift
-Full custom re-wire
-L series front end
Image

User avatar
GOD
Junior Member
Posts: 754
Joined: Sun May 04, 2008 10:04 pm
Location: Tom Price WA

Post by GOD » Sun Mar 24, 2013 4:10 pm

Silverbullet wrote:This is our tiny shed as it is now, it's always changing though :)
I'll see your tiny shed and raise you one miniscule shed:
Image

1.4 x 2.4 m storeroom, with another couple of workbenches out in the carport.

A somewhat more impressive shed:
Image
http://www.garagejournal.com/forum/show ... 22&page=14

Dane.
[SIGPIC][/SIGPIC]
1993 EA82/EJ18/EJ22/EJ22/EJ20/EJ22 L Series perpetual project

User avatar
Silverbullet
Senior Member
Posts: 2858
Joined: Mon Aug 23, 2010 6:20 pm
Location: Adelaide

Post by Silverbullet » Sun Mar 24, 2013 5:42 pm

Reading through that thread I think it's safe to say that guy isn't short of a few bob :roll: He must run a business out of that shop, there's no way known you'd need TWO surface grinders for personal use :o

*edit* AND a plunge EDM machine! :shock:
Will it ever end!?
-EA81 TWIN CARB!!!!
-L series 5 speed
-Custom paint job
-2" lift
-Full custom re-wire
-L series front end
Image

User avatar
GOD
Junior Member
Posts: 754
Joined: Sun May 04, 2008 10:04 pm
Location: Tom Price WA

Post by GOD » Sun Mar 24, 2013 7:28 pm

Bit jealous, mate? That shed (actually a few sheds, IIRC) belongs to a retired machinist - it's quite a few decades worth of accumulation. If you've got time to read the whole thread, he tells the stories of some of his machines.
[SIGPIC][/SIGPIC]
1993 EA82/EJ18/EJ22/EJ22/EJ20/EJ22 L Series perpetual project

User avatar
Silverbullet
Senior Member
Posts: 2858
Joined: Mon Aug 23, 2010 6:20 pm
Location: Adelaide

Post by Silverbullet » Sun Mar 24, 2013 8:16 pm

Little bit jealous, yes :oops: I did skim through the first 5 pages or so. Being an apprentice machinist/tool maker myself that sort of workshop in a home is like porn :o
Will it ever end!?
-EA81 TWIN CARB!!!!
-L series 5 speed
-Custom paint job
-2" lift
-Full custom re-wire
-L series front end
Image

User avatar
60766244
Junior Member
Posts: 586
Joined: Fri Nov 09, 2012 3:32 pm
Location: Kalamunda, Western Australia

Post by 60766244 » Sun Mar 24, 2013 10:55 pm

Just read that entire thread on Garage Journal. :o

I feel so inadequate. My whole life feels not enough. :P

So.

Much.

Tooling!

Here's me getting all excited about having grinders and a drill press. :rolleyes:
Otter the 2004 Outback with all the fruit.
Image
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?

|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||


User avatar
T.Farm.Brumby
Junior Member
Posts: 379
Joined: Wed Jan 04, 2012 8:37 pm
Location: North Brisbane

Post by T.Farm.Brumby » Sun Mar 24, 2013 11:01 pm

All these professional and organised sheds :(

I've found this is a great use for welding rods which are either too rooted to use, or cracked and broken
Image

And this is a car-port we made about 6 or 7 years ago. Very handy considering there's no space for the vehicles inside the actual shed. Plus the height is brilliant, can stand on the roof of any car and pack all our gear+boat and everything without hitting our heads (considering at 6 foot 1 I'm the runt of the men in our family hahaha) and still be out of the rain :cool:
Image
All The Rigs:

'86 RX Turbo "Thor"
'89 Brumby "Emma"
'89 Brumby "Brumbylicious"
'03 Outback "Uma"
'05 Forester
'14 Forester Luxury (My goodness is it schmick!)

User avatar
Rodeo4jake
Junior Member
Posts: 297
Joined: Fri Oct 19, 2012 5:42 am
Location: Tylden Victoria

Post by Rodeo4jake » Mon Mar 25, 2013 12:08 pm

That carport is nice, I need to get onto something like that.
Here's my disorganised disaster, I have just about everything you need for most projects, but then put all my Dads toys in there, plus the Cruiser & your out of room. I generally do all my work out the front of the shed now.

[ATTACH]4033[/ATTACH]

[ATTACH]4034[/ATTACH]

[ATTACH]4035[/ATTACH]

[ATTACH]4036[/ATTACH]

Sometime it's neater than this, but I can find most things I want.

Cheers Jake
Attachments
ImageUploadedByTapatalk1364177246.489544.jpg
ImageUploadedByTapatalk1364177246.489544.jpg (25.22 KiB) Viewed 3546 times
ImageUploadedByTapatalk1364177221.222438.jpg
ImageUploadedByTapatalk1364177221.222438.jpg (25.41 KiB) Viewed 3547 times
ImageUploadedByTapatalk1364177180.457967.jpg
ImageUploadedByTapatalk1364177180.457967.jpg (27.38 KiB) Viewed 3544 times
ImageUploadedByTapatalk1364177157.573246.jpg
ImageUploadedByTapatalk1364177157.573246.jpg (23.23 KiB) Viewed 3545 times

User avatar
T.Farm.Brumby
Junior Member
Posts: 379
Joined: Wed Jan 04, 2012 8:37 pm
Location: North Brisbane

Post by T.Farm.Brumby » Mon Mar 25, 2013 2:20 pm

Rodeo4jake wrote: Sometime it's neater than this, but I can find most things I want.
Always the way haha, mine's about the same about 80% of the time.

This is about the strength of my organisation, the only complete kits I have organised right now. About 4 times this strewn around the sheds waiting to be sorted.
(in order)
Metric spanners - screwdrivers - mini socket set - red and blue are imperial socket sets - on top metrinch socket and spanner set - metric socket set - imperial spanner set

Image
All The Rigs:

'86 RX Turbo "Thor"
'89 Brumby "Emma"
'89 Brumby "Brumbylicious"
'03 Outback "Uma"
'05 Forester
'14 Forester Luxury (My goodness is it schmick!)

User avatar
Cliff R
General Member
Posts: 1061
Joined: Sat Feb 07, 2009 11:07 am
Location: Muswellbrook/NSW

Post by Cliff R » Tue Mar 26, 2013 6:02 am

Well, I can only look on with envy.
I have a 6 x 6m shed that is about 6 years old, professionally built and I can only just get into the door.
I mean, I can only get in about 3 metres and thats it.
If I want to go any further I have to climb over stuff.
The poor MY sits outside under a car cover (a good quality one though)
I think a smaller space is easier to keep clean.

User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Tue Mar 26, 2013 7:00 am

mmm. minimalist was my theory too :( . I am sure if I had more shed space I'd have more crap (all very useful of course)
In trying to keep some sort of order of small stuff I use Aussie made Starmaid 1 litre lunch boxes @ about 3 for $2.50 - got a heap at a 50% off sale. Have about three empties and 70 full of stuff. Then the bigger 15 or so litre clear plastic boxes made somewhere in Victoria. Keeps their filth inside or outside filth out, keeps things together, easy to see trough the clear plastic!.

Shees, don't even think of moving !

User avatar
60766244
Junior Member
Posts: 586
Joined: Fri Nov 09, 2012 3:32 pm
Location: Kalamunda, Western Australia

Post by 60766244 » Sun Apr 14, 2013 10:41 pm

I think this is the right thread to put it, as well, this thread inspired the line of thought, as well as the GJ site linked here too.

I have a question:

If you could have the "Ultimate" shed - how would you have it?

On a practical level. Think of it for your block, or where you eventually want to live or how you eventually want to work in it. Push the idea of $$ imposed impossibilities and let that imagination flow... :D

Maybe we can all divine some inspiration and ideas.

I know some of you here have mad skills drawing/drafting and some can do 3D modelling (Google Sketchup) so I'd like to see your ideas.

I'll post my idea up tomorrow once I've done the finishing touches. :)


Edit: P.S. I hope you don't consider this a thread hijacking T.Farm.Brumby. ;)
Otter the 2004 Outback with all the fruit.
Image
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?

|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||


User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Mon Apr 15, 2013 7:43 am

a pit and a hoist for starters. Haven't used a pit since my L Sedan was waiting to be sold new but gees always wanted access to one since - no creaking hoists for starters :D , hoist legs to bang head on but they were a little dusty sweeping up the kitty litter :(

User avatar
Silverbullet
Senior Member
Posts: 2858
Joined: Mon Aug 23, 2010 6:20 pm
Location: Adelaide

Post by Silverbullet » Mon Apr 15, 2013 5:37 pm

Oh man, dream sheds? Where do you even start with that? :rolleyes: I guess imposing cost and viability limits on it makes it a bit easier hehe.

I would have at least a double garage with roller doors, ideally with a large space in front of the cars for the rest of my shed/workshop. In the workshop I would have a section with benches and storage dedicated to automotive work and repair with things like spanners, sockets, compressor, air tools etc. Part of this would be a large storage rack with big organized tubs for spare parts and bits.
The bench would follow a wall around the back of my "shed" to the other side which would be my mini engineering workshop. So stuff like my welder (with a special metal top flat welding bench for fab work) Drawers and toolboxes full of measuring and metal cutting tools, misc engineering tools. Then at the end of this bench I would have a decent sized lathe with shelving for associated metal stock and turning tools. Also a large pin board or whiteboard for sketching up ideas and notes.

Somewhere in there would be 2 big speakers and a stereo system, fridge and sink :) And of course ample power sockets and lighting. Maybe I'll have to re-install and re-learn sketchup and draw this out...
Will it ever end!?
-EA81 TWIN CARB!!!!
-L series 5 speed
-Custom paint job
-2" lift
-Full custom re-wire
-L series front end
Image

Post Reply

Return to “Open Slather”