Trolley Jack
Trolley Jack
I'm trying to find a trolley jack at a reasonable price (~$150). A decent one, not one of those dicky little ones lol. I got mine from Repco but it doesnt lower smoothly. No matter how careful I am it "drops" the car, not good when trying to gently lower onto stands. The other factor is it must have a reasonable lift, at least 400mm.
[SIGPIC][/SIGPIC]
Owner SubieLiftOz, lift kits for Subarus
'97 Forester: EJ22E; 4" Custom Body Lift; JDM STi plated LSD; 20mm WRX RSB; Snorkel; Kings
Owner SubieLiftOz, lift kits for Subarus

'97 Forester: EJ22E; 4" Custom Body Lift; JDM STi plated LSD; 20mm WRX RSB; Snorkel; Kings
I've already swapped it once. Called them yest & they agreed to a refund. Apart from it "dropping", ie not lowering smoothly, its fine.tambox wrote:If its from Repco, you will have a warrantee, ask them first, might end up with a new one for free.
Or you can pull it to bits and polish the release valve and seat.
Had a look at the parts drawing, there's a screw release valve & an o-ring, so I'm not sure if I'm capable of improving that.
If I can find a reasonable jack, I'm happy to just return it.
I also dropped in at Autobarn today, there "Orcon" brand was the same, wouldnt lower smoothly no matter how slowly I turned the handle

[SIGPIC][/SIGPIC]
Owner SubieLiftOz, lift kits for Subarus
'97 Forester: EJ22E; 4" Custom Body Lift; JDM STi plated LSD; 20mm WRX RSB; Snorkel; Kings
Owner SubieLiftOz, lift kits for Subarus

'97 Forester: EJ22E; 4" Custom Body Lift; JDM STi plated LSD; 20mm WRX RSB; Snorkel; Kings
Try Trade Tools i got one from there it has a fast lift till it gets pressure
It dose the job even with lifted cars
Here is one similar https://www.tradetools.com/products/GJ2T
Jan
It dose the job even with lifted cars
Here is one similar https://www.tradetools.com/products/GJ2T
Jan
[SIGPIC][/SIGPIC] !!!Subies will go anywhere
- RSR 555
- Elder Member
- Posts: 6951
- Joined: Sat Nov 10, 2007 10:42 am
- Location: ATM... stuck in Rockingham
Did you buy one? and if so, how did it go??
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
Finally...the container made it in. Picked it up today. Wasnt till I got home & looked up their website found they had a deal, 2T trolley jack plus quick release stands for the same price! Might have to give them a call...
https://www.tradetools.com/products/GJ2TKIT
Unlike the crap Repco one, this has a very smooth action & lowers the car gently & slowly
https://www.tradetools.com/products/GJ2TKIT
Unlike the crap Repco one, this has a very smooth action & lowers the car gently & slowly

[SIGPIC][/SIGPIC]
Owner SubieLiftOz, lift kits for Subarus
'97 Forester: EJ22E; 4" Custom Body Lift; JDM STi plated LSD; 20mm WRX RSB; Snorkel; Kings
Owner SubieLiftOz, lift kits for Subarus

'97 Forester: EJ22E; 4" Custom Body Lift; JDM STi plated LSD; 20mm WRX RSB; Snorkel; Kings
- RSR 555
- Elder Member
- Posts: 6951
- Joined: Sat Nov 10, 2007 10:42 am
- Location: ATM... stuck in Rockingham
Looks good Matt. I hope you get your stands 

You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
- vincentvega
- Senior Member
- Posts: 2446
- Joined: Tue Oct 04, 2005 10:00 am
- Location: Brisvegas
- Contact: