iv just about finished the wiring for my ea82t convertion when i released that the harness only has 3 wires for the dizzy. but the plug coming off the dizzy has 4 wires. what i think has happend is that iv got the non turbo mpi harness. Can the engine run properly with out the correct harness??
cheers jarrod
ea82t dizzy plug
-
Gannon
- Senior Member
- Posts: 4580
- Joined: Sat Nov 05, 2005 10:00 am
- Location: Bowraville, Mid Nth Coast, NSW
Is it a 4 plug or 3 plug ECU?
If its a 4 plug ecu/hotwire maf, the distributor is the same (has 4 wires) between turbo and non turbo mpfi.
As for 3 plug ecu/flapper maf, im insure how many wires go to the dizzy
If its a 4 plug ecu/hotwire maf, the distributor is the same (has 4 wires) between turbo and non turbo mpfi.
As for 3 plug ecu/flapper maf, im insure how many wires go to the dizzy
Current rides: 2016 Mitsubishi Triton GLS & 2004 Forester X
Ongoing Project/Toy: 1987 RX Turbo EA82T, Speeduino ECU, Coil-pack ignition, 440cc Injectors, KONI adjustale front struts, Hybrid L Series/ Liberty AWD 5sp
Past rides: 92 L series turbo converted wagon, 83 Leone GL Sedan, 2004 Liberty GT Sedan & 2001 Outback
------------------------------------------
Ongoing Project/Toy: 1987 RX Turbo EA82T, Speeduino ECU, Coil-pack ignition, 440cc Injectors, KONI adjustale front struts, Hybrid L Series/ Liberty AWD 5sp
Past rides: 92 L series turbo converted wagon, 83 Leone GL Sedan, 2004 Liberty GT Sedan & 2001 Outback
------------------------------------------