Will a Brumby bull bar fit an L Series?

Psymon · Post by **Psymon** » Fri May 08, 2009 9:27 am

Hi guys

Just wondering if a brumby bull bar will fit onto an L series. I have a friend with a couple of unused brumbys on his farm and one has a bullbar he said I can take if it fits!

Cheers

sagey · Post by **sagey** » Fri May 08, 2009 10:12 am

yer mate i got a brumby bullbar for my l series...unfortunately it didnt fit...
they do fit on leones though...so i passed it off to my mate!

Psymon · Post by **Psymon** » Fri May 08, 2009 10:50 am

That sucks

Subaman · Post by **Subaman** » Fri May 08, 2009 1:00 pm

Sunspares always reckoned they fit, aparently you need to move the mounting brackets slightly and trim some length from the sides, but the width is right.

Psymon · Post by **Psymon** » Fri May 08, 2009 1:54 pm

Hmm... i might grab it and have a go... can't hurt!

stamp_licker · Post by **stamp_licker** » Fri May 08, 2009 5:24 pm

I got a brumby one on my L.Had to cut the sides down a bit and make brackets to space out the mounts,pretty easy job.
Here's a pic

ian059 · Post by **ian059** » Sat May 09, 2009 12:06 am

stamp_licker wrote:I got a brumby one on my L.Had to cut the sides down a bit and make brackets to space out the mounts,pretty easy job.
Here's a pic

That's a big bump coming up in front of your left hand wheel. Did it hurt?

stamp_licker · Post by **stamp_licker** » Sat May 09, 2009 6:53 pm

ian059 wrote:That's a big bump coming up in front of your left hand wheel. Did it hurt?

Nah tough L series;)

Psymon · Post by **Psymon** » Sat May 09, 2009 8:34 pm

stamp_licker wrote:I got a brumby one on my L.Had to cut the sides down a bit and make brackets to space out the mounts,pretty easy job.

Any chance of a close up pic of the brackets you made?

Cheers
Simon

Phizinza · Post by **Phizinza** » Sun May 10, 2009 6:15 pm

Why waist a good Brumby bar on an L series ??

Yeah, won't fit without modding. Mounts are wrong and the width is much different